NameError:name ‘sys‘ is not defined

最新推荐文章于 2024-03-14 10:08:17 发布
最新推荐文章于 2024-03-14 10:08:17 发布
阅读量2.7k 收藏
点赞数 2
分类专栏： app自动化菜鸟日常 文章标签： app
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_29161009/article/details/112601192
版权

airtest不同文件夹下创建文件，导入文件时使用相对路径找不到文件

using("../MacOS/action/AppActionHomeBuy.air")
from AppActionHomeBuy import *

所以这个时候可以用绝对路径
使用sys前要import sys 不然也会报错

import sys
from airtest.core.api import *
sys.path.append(r'/Applications/AirtestIDE.app/Contents/MacOS/action/AppActionHomeBuy.air')
using("AppActionHomeBuy.air")
from AppActionHomeBuy import *
是阿乐呀！
关注
  • 2
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
Sys is not defined 解决办法
a13643156647的博客
04-26 1560
只需要在页面上加一个ScriptManager. 分析原因: 大家知道, 像Sys.Application, Sys.WebForms, Sys.Browser, Sys.StringBuilder...等是MS Ajax库提供的一套东西. 它们定义在如下文件中: 1 <asp:ScriptReference name="MicrosoftAjax.js"/...
NameError:name 'sys' is not defined
Omann的博客
01-13 1万+
在学习python数据分析的数据加载、存储与文件格式，170页，想实现如下程序效果： 但是却出现错误： 图片内的sys.stout应该改成sys.stdout 错误意思是说‘sys’没有定义过。 关键是翻阅此书籍，愣是没找到提前定义‘sys’的代码。 所以，为了防止出现错误，应该事先定义，如下： 再次出入代码运行： 成功。 ...
NameError: name 'sys' is not defined
gwf12199042的博客
09-20 7522
在python 代码最前面添加：import sys
【Python】成功解决NameError: name ‘sns‘ is not defined
最新发布
创作高质量博文，分享知识，共同进步！
03-14 1154
🔥【Python进阶】告别"NameError: name 'sns' is not defined"的烦恼！📊 遇到Seaborn库的"NameError"？别慌！本文为你揭秘如何轻松解决。📦首先，确保正确导入Seaborn库，并为其分配别名'sns'。📈接着，通过示例代码深入了解其用法。💡更提供实用建议，避免此类错误再次发生。此外，我们还探讨如何检查其他库和模块的使用，并利用IDE和编辑器的功能提升编程效率。🛠️最后，总结全文，助你轻松驾驭Python可视化。
( ap6181_sina33m_sc3817r验证通过_20170710_1608没有外层目录.7z
07-10
调通sina33m下的ap6181版本 大文实验室/大文哥 壹捌陆捌零陆捌捌陆捌贰 wb4916 AT qq.com 完成时间：2017/7/7 18:11 版本：V1.0 SDK：Android6.0.1 开发板：SC3817R 1、关闭“设置”中的“蓝牙”选项： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\overlay\frameworks\base\core\res\res\values\config.xml （干掉这里：） <!-- List of regexpressions describing the interface (if any) that represent tetherable bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this should be empty. --> <!-- default: disable Bluetooth PAN feature --> <string-array translatable="false" name="config_tether_bluetooth_regexs"> <item>"bt-pan"</item> </string-array> 2、打开WIFI，关闭BT： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\astar_d7.mk PRODUCT_PACKAGES += Launcher3 PRODUCT_PACKAGES += \ ESFileExplorer \ VideoPlayer #Bluetooth PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.camera.xml:system/etc/permissions/android.hardware.camera.xml \ frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml #frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \ #frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml #PRODUCT_COPY_FILES += \ # device/softwinner/astar-d7/bluetooth/bt_vendor.conf:system/etc/bluetooth/bt_vendor.conf # bootanimation PRODUCT_COPY_FILES += \ device/softwinner/astar-d7/media/bootanimation.zip:system/media/bootanimation.zip # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-d7/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini # Realtek wifi efuse map #PRODUCT_COPY_FILES += \ #device/softwinner/astar-d7/wifi_efuse_8723bs-vq0.map:system/etc/wifi/wifi_efuse_8723bs-vq0.map PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 \ ro.sys.mutedrm=true \ rw.logger=0 #$(call inherit-product-if-exists, vendor/google/products/gms_base.mk) #for 8723bs-vq0,should setmacaddr #PRODUCT_PACKAGES += setmacaddr #for 8723bs-vq0,should setbtmacaddr #PRODUCT_PACKAGES += setbtmacaddr 3、修改WIFI为AP6181： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\BoardConfig.mk # 1.2 broadcom wifi support # BOARD_USR_WIFI:ap6181/ap6210/ap6212/ap6330/ap6335 BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" BOARD_USR_WIFI := ap6181 include hardware/broadcom/wlan/bcmdhd/firmware/$(BOARD_USR_WIFI)/device-bcm.mk endif # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor # BOARD_HAVE_BLUETOOTH_NAME:rtl8723bs/rtl8723bs_vq0/rtl8723cs/ap6210/ap6212/ap6330/ap6335/ #BOARD_HAVE_BLUETOOTH := true # #BOARD_HAVE_BLUETOOTH_BCM := true #BOARD_HAVE_BLUETOOTH_NAME := ap6212 #BOARD_HAVE_BLUETOOTH_RTK_COEX := true #BOARD_HAVE_BLUETOOTH_RTK := true #BLUETOOTH_HCI_USE_RTK_H5 := true #BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/softwinner/astar-d7/bluetooth 4、关闭BT： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\init.sun8i.rc # tp & sensors init_dev_detect # network insmod /system/vendor/modules/bcmdhd.ko #insmod /system/vendor/modules/bcm_btlpm.ko insmod /system/vendor/modules/usbnet.ko insmod /system/vendor/modules/asix.ko insmod /system/vendor/modules/qf9700.ko #insmod /system/vendor/modules/mcs7830.ko #insmod /system/vendor/modules/smsc95xx.ko insmod /system/vendor/modules/rtl8152.ko #insmod /system/vendor/modules/cdc_ether.ko # GPS # chmod 777 /system/bin/glgps # chown root system /system/bin/glgps # chmod 777 /system/lib/hw/gps.default.so # chown root system /system/lib/hw/gps.default.so # mkdir /data/gps # chmod 770 /data/gps # chown system net_bt_stack /data/gps # to observe dnsmasq.leases file for dhcp information of soft ap. chown dhcp system /data/misc/dhcp on post-fs-data mkdir /data/media 0770 media_rw media_rw # bluetooth MAC address programming #chown bluetooth net_bt_stack ro.bt.bdaddr_path #chown bluetooth net_bt_stack /system/etc/bluetooth #chown bluetooth net_bt_stack /data/misc/bluetooth #setprop ro.bt.bdaddr_path "/data/misc/bluetooth/bdaddr" # Set indication (checked by vold) that we have finished this action setprop vold.post_fs_data_done 1 # to force to start sdcard # class_start late_start # This module write data to /data should insmod in post-fs-data # due to encryption on boot chown system system /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor chmod 0660 /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor chown system system /sys/kernel/autohotplug/enable chmod 0660 /sys/kernel/autohotplug/enable chown system system /sys/devices/system/cpu/cpu0/cpufreq/boot_lock chmod 0660 /sys/devices/system/cpu/cpu0/cpufreq/boot_lock chown system system /sys/devices/platform/sunxi-budget-cooling/roomage chmod 0660 /sys/devices/platform/sunxi-budget-cooling/roomage chown system system /sys/class/devfreq/sunxi-ddrfreq/dsm/scene chmod 0660 /sys/class/devfreq/sunxi-ddrfreq/dsm/scene on charger insmod disp.ko insmod lcd.ko class_start charger write /sys/module/printk/parameters/console_suspend N write /proc/sys/kernel/printk 0 on fs # UDISK would be mounted as data partition when multiple user enabled. #format_userdata /dev/block/by-name/UDISK ASTAR #bluesleep #insmod /system/vendor/modules/rtl_bluesleep.ko ## bluetooth ## UART device #chmod 0660 /dev/ttyS1 #chown bluetooth net_bt_stack /dev/ttyS1 # ## power up/down interface #chmod 0660 /sys/class/rfkill/rfkill0/state #chmod 0660 /sys/class/rfkill/rfkill0/type #chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state #chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type # # ## bluetooth LPM #chmod 0220 /proc/bluetooth/sleep/lpm #chmod 0220 /proc/bluetooth/sleep/btwrite #chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm #chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite #write /proc/bluetooth/sleep/lpm 1 5、可选： R:\wyb\ap6181_sina33m_sc3817r\android\device\softwinner\astar-d7\ueventd.sun8i.rc #/dev/video1 0777 media media /dev/snd/pcmC0D0c 0777 media media /dev/snd/pcmC0D0p 0777 media media #/dev/ttyS1 0660 bluetooth bluetooth 6、可选： R:\wyb\ap6181_sina33m_sc3817r\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml <integer name="def_screen_off_timeout">1800000</integer> <bool name="def_lockscreen_disabled">true</bool> 7、请严重注意，全志在这里埋坑了！（坑爹无敌！） Android里面调入配置文件：nvram.txt，里面里面调入：nvram_ap6181.txt。 R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\config.txt R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\device-bcm.mk # # Copyright (C) 2008 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # -include hardware/broadcom/wlan/bcmdhd/config/config-bcm.mk WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40181a2.bin" WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40181a2_p2p.bin" WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40181a2_apsta.bin" PRODUCT_COPY_FILES += \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/fw_bcm40181a2_p2p.bin:system/vendor/modules/fw_bcm40181a2_p2p.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/fw_bcm40181a2_apsta.bin:system/vendor/modules/fw_bcm40181a2_apsta.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/fw_bcm40181a2.bin:system/vendor/modules/fw_bcm40181a2.bin \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/nvram_ap6181.txt:system/vendor/modules/nvram_ap6181.txt \ hardware/broadcom/wlan/bcmdhd/firmware/ap6181/config.txt:system/vendor/modules/config.txt R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\fw_bcm40181a2.bin R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\fw_bcm40181a2_apsta.bin R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\fw_bcm40181a2_p2p.bin R:\wyb\ap6181_sina33m_sc3817r\android\hardware\broadcom\wlan\bcmdhd\firmware\ap6181\nvram_ap6181.txt 8、可选： R:\wyb\ap6181_sina33m_sc3817r\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java 9、可选： R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\arch\arm\mach-sunxi\rf\bt_pm.c static int rfkill_set_power(void *data, bool blocked) { unsigned int mod_sel = wifi_pm_get_mod_type(); RF_MSG("rfkill set power %d\n", blocked); switch (mod_sel) { case 2: /* ap6210 */ if (!blocked) { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 1); } else { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 0); } break; case 4: /* realtek rtl8723au */ if (!blocked) { wifi_pm_gpio_ctrl("rtl8723au_bt", 1); } else { wifi_pm_gpio_ctrl("rtl8723au_bt", 0); } break; case 5: /* realtek rtl8723bs */ if (!blocked) { wifi_pm_gpio_ctrl("rtl8723bs_bt_regon", 1); } else { wifi_pm_gpio_ctrl("rtl8723bs_bt_regon", 0); } break; case 7: /* ap6476 */ if (!blocked) { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 1); } else { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 0); } break; case 9: /* ap6212 */ if (!blocked) { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 1); } else { wifi_pm_gpio_ctrl("ap6xxx_bt_regon", 0); } break; default: RF_MSG("no bt module matched !!\n"); } msleep(10); return 0; } 10、可选： R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\arch\arm\mach-sunxi\rf\wifi_pm.c struct wifi_pm_ops wifi_select_pm_ops; static char* wifi_mod[] = {" ", "ap6181", /* 1 - AP6181*/ "ap6210", /* 2 - AP6210*/ "rtl8188eu", /* 3 - RTL8188EU*/ "rtl8723au", /* 4 - RTL8723AU*/ "rtl8723bs", /* 5 - RTL8723BS*/ "esp8089", /* 6 - ESP8089*/ "ap6476", /* 7 - AP6476*/ "rtl8189es", /* 8 - rtl8189es*/ "ap6212", /* 9 - AP6212*/ "ap6330", /* 10- AP6330*/ "gb9663", /* 11- GB9663*/ }; static int __devinit wifi_pm_probe(struct platform_device *pdev) { struct wifi_pm_ops *ops = &wifi_select_pm_ops; switch (ops->module_sel.val) { case 1: /* AP6181 */ ap6xxx_gpio_init(); break; case 2: /* AP6210 */ ap6xxx_gpio_init(); break; case 3: /* RTL8188EU */ rtl8188eu_gpio_init(); break; case 4: /* RTL8723AU */ rtl8723au_gpio_init(); break; case 5: /* RTL8723BS */ rtl8723bs_gpio_init(); break; case 6: /* ESP8089 */ esp8089_gpio_init(); break; case 7: /* AP6476 */ ap6xxx_gpio_init(); break; case 8: /* rtl8189es */ rtl8189es_gpio_init(); break; case 9: /* AP6212 */ ap6xxx_gpio_init(); break; default: wifi_pm_msg("wrong sdio module select %d !\n", ops->module_sel.val); } awwifi_procfs_attach(); wifi_pm_msg("wifi gpio init is OK !!\n"); return 0; } 11、可选： R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\include\bcmdevs.h #define BCM4350_CHIP_ID 0x4350 #define BCM43430_CHIP_ID 43430 /* 43430 chipcommon chipid 0xa9a6 */ #define BCM4342_CHIP_ID 4342 R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_common.c void dhd_common_init(osl_t *osh) { int select_type = 0; //aw checkout which wifi had select //select_type = wifi_pm_get_mod_type(); select_type = 1; #ifdef CONFIG_BCMDHD_FW_PATH //select ap6181 or ap6210 or ap6476 if (select_type == 1 || select_type == 2 || select_type == 7) { bcm_strncpy_s(fw_path, sizeof(fw_path), "/system/vendor/modules/fw_bcm40181a2.bin", MOD_PARAM_PATHLEN-1); } #else /* CONFIG_BCMDHD_FW_PATH */ fw_path[0] = '\0'; #endif /* CONFIG_BCMDHD_FW_PATH */ #ifdef CONFIG_BCMDHD_NVRAM_PATH switch (select_type) { //ap6181 case 1: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6181.txt", MOD_PARAM_PATHLEN-1); break; //ap6210 case 2: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6210.txt", MOD_PARAM_PATHLEN-1); break; //ap6476 case 7: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram_ap6476.txt", MOD_PARAM_PATHLEN-1); break; //ap6212 case 9: bcm_strncpy_s(nv_path, sizeof(nv_path), "/system/vendor/modules/nvram.txt", MOD_PARAM_PATHLEN-1); break; default: break; } #else /* CONFIG_BCMDHD_NVRAM_PATH */ nv_path[0] = '\0'; #endif /* CONFIG_BCMDHD_NVRAM_PATH */ #ifdef CONFIG_BCMDHD_CONFIG_PATH bcm_strncpy_s(conf_path, sizeof(conf_path), "/system/vendor/modules/config.txt", MOD_PARAM_PATHLEN-1); #else /* CONFIG_BCMDHD_CONFIG_PATH */ conf_path[0] = '\0'; #endif /* CONFIG_BCMDHD_CONFIG_PATH */ #ifdef SOFTAP fw_path2[0] = '\0'; #endif } R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_linux.c int dhd_bus_start(dhd_pub_t *dhdp) { int ret = -1; dhd_info_t *dhd = (dhd_info_t*)dhdp->info; unsigned long flags; ASSERT(dhd); DHD_TRACE(("Enter %s:\n", __FUNCTION__)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdlock(dhdp); #endif /* DHDTHREAD */ /* try to download image and nvram to the dongle */ if ((dhd->pub.busstate == DHD_BUS_DOWN) && (fw_path[0] != '\0') && (nv_path[0] != '\0')) { #ifdef SHOW_NVRAM_TYPE { /* Show nvram type in the kernel log */ int i; for (i = 0; nv_path[i] != '\0'; ++i) { if (nv_path[i] == '.') { ++i; break; } } DHD_ERROR(("%s: nvram_type = [%s]\n", __FUNCTION__, &nv_path[i])); } #endif /* SHOW_NVRAM_TYPE */ /* wake lock moved to dhdsdio_download_firmware */ if (!(dhd_bus_download_firmware(dhd->pub.bus, dhd->pub.osh, fw_path, nv_path, conf_path))) { DHD_ERROR(("%s: dhdsdio_probe_download failed. firmware = %s nvram = %s config = %s\n", __FUNCTION__, fw_path, nv_path, conf_path)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ // 2017/6/23 18:40 wenyuanbo download ap6212 fail not return error!!!! //return -1; } } if (dhd->pub.busstate != DHD_BUS_LOAD) { #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ return -ENETDOWN; } /* Start the watchdog timer */ dhd->pub.tickcnt = 0; dhd_os_wd_timer(&dhd->pub, dhd_watchdog_ms); /* Bring up the bus */ if ((ret = dhd_bus_init(&dhd->pub, FALSE)) != 0) { DHD_ERROR(("%s, dhd_bus_init failed %d\n", __FUNCTION__, ret)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ return ret; } bcmsdh_set_drvdata(dhdp); // terence 20130427: fix for null pointer issue #if defined(OOB_INTR_ONLY) /* Host registration for OOB interrupt */ if (bcmsdh_register_oob_intr(dhdp)) { /* deactivate timer and wait for the handler to finish */ flags = dhd_os_spin_lock(&dhd->pub); dhd->wd_timer_valid = FALSE; dhd_os_spin_unlock(&dhd->pub, flags); del_timer_sync(&dhd->timer); DHD_ERROR(("%s Host failed to register for OOB\n", __FUNCTION__)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ DHD_OS_WD_WAKE_UNLOCK(&dhd->pub); return -ENODEV; } /* Enable oob at firmware */ dhd_enable_oob_intr(dhd->pub.bus, TRUE); #endif /* If bus is not ready, can't come up */ if (dhd->pub.busstate != DHD_BUS_DATA) { flags = dhd_os_spin_lock(&dhd->pub); dhd->wd_timer_valid = FALSE; dhd_os_spin_unlock(&dhd->pub, flags); del_timer_sync(&dhd->timer); DHD_ERROR(("%s failed bus is not ready\n", __FUNCTION__)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ DHD_OS_WD_WAKE_UNLOCK(&dhd->pub); return -ENODEV; } #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ dhd_process_cid_mac(dhdp, TRUE); /* Bus is ready, do any protocol initialization */ if ((ret = dhd_prot_init(&dhd->pub)) < 0) return ret; dhd_process_cid_mac(dhdp, FALSE); #ifdef ARP_OFFLOAD_SUPPORT if (dhd->pend_ipaddr) { #ifdef AOE_IP_ALIAS_SUPPORT aoe_update_host_ipv4_table(&dhd->pub, dhd->pend_ipaddr, TRUE, 0); #endif /* AOE_IP_ALIAS_SUPPORT */ dhd->pend_ipaddr = 0; } #endif /* ARP_OFFLOAD_SUPPORT */ return 0; } R:\wyb\ap6181_sina33m_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_sdio.c static bool dhdsdio_chipmatch(uint16 chipid) { if (chipid == BCM4325_CHIP_ID) return TRUE; if (chipid == BCM4329_CHIP_ID) return TRUE; if (chipid == BCM4315_CHIP_ID) return TRUE; if (chipid == BCM4319_CHIP_ID) return TRUE; if (chipid == BCM4336_CHIP_ID) return TRUE; if (chipid == BCM4330_CHIP_ID) return TRUE; if (chipid == BCM43237_CHIP_ID) return TRUE; if (chipid == BCM43362_CHIP_ID) return TRUE; if (chipid == BCM4314_CHIP_ID) return TRUE; if (chipid == BCM43242_CHIP_ID) return TRUE; if (chipid == BCM43340_CHIP_ID) return TRUE; if (chipid == BCM43341_CHIP_ID) return TRUE; if (chipid == BCM43143_CHIP_ID) return TRUE; if (chipid == BCM43342_CHIP_ID) return TRUE; if (chipid == BCM4334_CHIP_ID) return TRUE; if (chipid == BCM43239_CHIP_ID) return TRUE; if (chipid == BCM4324_CHIP_ID) return TRUE; if (chipid == BCM4335_CHIP_ID) return TRUE; if (chipid == BCM4339_CHIP_ID) return TRUE; if (chipid == BCM4350_CHIP_ID) return TRUE; if (chipid == BCM43430_CHIP_ID) return TRUE; return FALSE; } R:\wyb\ap6181_sina33m_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\d7\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo1_vol = 3300 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800 [jtag_para] jtag_enable = 0 ;***************************************************************************** ;sdram configuration ; ;***************************************************************************** [dram_para] dram_clk = 552 [wakeup_src_para] cpu_en = 0 cpu_freq = 48 ; (cpu:apb:ahb) pll_ratio = 0x111 dram_selfresh_en= 1 dram_freq = 36 wakeup_src_wl = port:PL07<4><default><default><0> ;wakeup_src_bt = port:PL09<4><default><default><0> ;bb_wake_ap = port:PL02<4><default><default><0> [uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PF02<3><1><default><default> uart_rx = port:PF04<3><1><default><default> ;---------------------------------------------------------------------------------- ;capacitor tp configuration ;ctp_twi_id : twi controller ID ;ctp_twi_addr : I2C slave address, 7bit ;ctp_screen_max_x/_y : resolution of touch panel ;ctp_revert_x/_y_flag : whether need to revert x/y ;ctp_exchange_x_y_flag: whether need to exchange the value of x and y ;ctp_int_port : port for tp's interrupt signal ;ctp_wakeup : port for wakeup tp ;---------------------------------------------------------------------------------- [ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1 ctp_int_port = port:PL04<4><default><default><default> ctp_wakeup = port:PL03<1><default><default><1> ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io = ;-------------------------------------------------------------------------------- ; CTP automatic detection configuration ;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused ;Module name postposition 1 said detection, 0 means no detection. ;-------------------------------------------------------------------------------- [ctp_list_para] ctp_det_used = 1 ft5x_ts = 1 gt82x = 1 gslX680 = 1 gslX680new = 0 gt9xx_ts = 1 gt9xxf_ts = 0 tu_ts = 0 gt818_ts = 1 zet622x = 1 aw5306_ts = 1 icn83xx_ts = 0 [motor_para] motor_used = 0 ;---------------------------------------------------------------------------------- ;lcd0 configuration ;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi ;lcd_x: lcd horizontal resolution ;lcd_y: lcd vertical resolution ;lcd_width: width of lcd in mm ;lcd_height: height of lcd in mm ;lcd_dclk_freq: in MHZ unit ;lcd_pwm_freq: in HZ unit ;lcd_pwm_pol: lcd backlight PWM polarity ;lcd_pwm_max_limit lcd backlight PWM max limit(<=255) ;lcd_hbp: hsync back porch ;lcd_ht: hsync total cycle ;lcd_vbp: vsync back porch ;lcd_vt: vysnc total cycle ;lcd_hspw: hsync plus width ;lcd_vspw: vysnc plus width ;lcd_lvds_if: 0:single link; 1:dual link ;lcd_lvds_colordepth: 0:8bit; 1:6bit ;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode ;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither ;lcd_io_phase: 0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase; ; 8~11bit:dclk phase; 12~15bit:de phase) ;lcd_gamma_en lcd gamma correction enable ;lcd_bright_curve_en lcd bright curve correction enable ;lcd_cmap_en lcd color map function enable ;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch) ;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10; ; decrease it while lcd is not bright enough; increase while lcd is too bright ;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch) ;---------------------------------------------------------------------------------- [lcd0_para] lcd_used = 1 lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PD13<1><0><default><1> ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;lcd_bl_en = port:PL06<1><0><default><1> lcd_power = "axp22_dc1sw" lcdd0 = port:PD18<3><0><default><default> lcdd1 = port:PD19<3><0><default><default> lcdd2 = port:PD20<3><0><default><default> lcdd3 = port:PD21<3><0><default><default> lcdd4 = port:PD22<3><0><default><default> lcdd5 = port:PD23<3><0><default><default> lcdd6 = port:PD24<3><0><default><default> lcdd7 = port:PD25<3><0><default><default> lcdd8 = port:PD26<3><0><default><default> lcdd9 = port:PD27<3><0><default><default> ;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00<2><0><default><default> [pwm1_para] pwm_used = 1 pwm_positive = port:PH01<2><0><default><default> [usbc0] usb_used = 1 usb_port_type = 2 usb_detect_type = 1 usb_id_gpio = port:PD10<0><1><default><default> usb_det_vbus_gpio = "axp_ctrl" usb_drv_vbus_gpio = port:power4<1><0><default><0> usb_restrict_gpio = usb_host_init_state = 0 usb_restric_flag = 0 usb_restric_voltage = 3550000 usb_restric_capacity= 5 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_regulator_id_vbus = "axp22_dcdc1" usb_regulator_id_vbus_vol = 3000000 [usbc1] usb_used = 1 usb_drv_vbus_gpio = port:PD12<1><0><default><0> usb_restrict_gpio = usb_host_init_state = 1 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 ;-------------------------------------------------------------------------------- ;wifi/bt/fm/gps/nfc modules configuration ;module_num: ; 0- none ; 1- ap6181(wifi) ; 2- ap6210(wifi+bt) ; 3- rtl8188eu(wifi) ; 4- rtl8723au(wifi+bt) ; 5- rtl8723bs(wifi+bt) ; 6- esp8089(wifi) ; 7- ap6476(wifi+bt+fm+gps) ; 8- rtl8189es(wifi) ; 9- ap6212(wifi+bt+fm) ; 10- ap6330(wifi+bt+fm) ; 11- gb9663(wifi+bt+fm) ;module_power1: ""- bat, "axp_dldo1"- axp dldo1 ;module_power1_vol: power1 voltage, mv; not used for module_power1 is "" ;module_power2: ""- bat, "axp_dldo2"- axp dldo2 ;module_power2_vol: power2 voltage, mv; not used for module_power2 is "" ;module_power3: ""- bat, "axp_dldo2"- axp dldo2 ;module_power3_vol: power3 voltage, mv; not used for module_power3 is "" ;power_switch: module power switch io when bat supply ;chip_en: enable chip io ;lpo_use_apclk: ""- not use, "losc_out"- a23/33, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80/a83 ;-------------------------------------------------------------------------------- [rf_para] module_num = 1 module_power1 = "axp22_aldo1" module_power1_vol = 3000000 module_power2 = "" module_power2_vol = 3000000 module_power3 = "" module_power3_vol = 3000000 power_switch = chip_en = lpo_use_apclk = "losc_out" ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_used: 0-not use, 1- use ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wl_reg_on: wifi function enable io ;wl_host_wake: wifi device wake-up host ;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wifi_mod_sel = 1 wifi_power = "" wifi_power_ext1 = "" wifi_power_ext2 = "" ; 1 - ap6181 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ;ap6xxx_lpo_use_apclk = 1 ; 2 - ap6210 sdio wifi gpio config ap6xxx_wl_regon = port:PL06<1><default><default><0> ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ;ap6xxx_bt_regon = port:PL08<1><default><default><0> ;ap6xxx_bt_wake = port:PL10<1><default><default><0> ;ap6xxx_bt_host_wake = port:PL09<4><default><default><0> ap6xxx_lpo_use_apclk = 1 ; 3 - rtl8188eu usb wifi gpio conifg ; 4 - rtl8723au usb wifi + bt ; 5 - rtl8723bs sdio wifi + bt ;rtl8723bs_chip_en = port:PL11<1><default><default><0> ;rtl8723bs_wl_regon = port:PL06<1><default><default><0> ;rtl8723bs_wl_host_wake = port:PL07<4><default><default><0> ;rtl8723bs_bt_regon = port:PL08<1><default><default><0> ;rtl8723bs_bt_wake = port:PL10<1><default><default><0> ;rtl8723bs_bt_host_wake = port:PL09<4><default><default><0> ;rtl8723bs_lpo_use_apclk = 0 ; 6 - eagle sdio wifi ;esp_wl_chip_en = port:PL03<1><default><default><0> ;esp_wl_rst = port:PL02<1><default><default><0> ; 7 - ap6476 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ;ap6xxx_bt_regon = port:PL08<1><default><default><0> ;ap6xxx_bt_wake = port:PL10<1><default><default><0> ;ap6xxx_bt_host_wake = port:PL09<4><default><default><0> ;ap6xxx_lpo_use_apclk = 1 ; 8 - rtl8189es sdio wifi gpio conifg ;rtl8189es_shdn = port:PL06<1><default><default><0> ;rtl8189es_host_wake = port:PL07<4><default><default><0> usb_vbus_power_ctrl = port:PL11<1><default><default><1> usb_eth_power_ctrl = port:PL04<1><default><default><1> ;-------------------------------------------------------------------------------- ;bluetooth configuration ;bt_used: 0- no used, 1- used ;bt_uard_id: 0- uart0, 1- uart1, 2- uart2 ;bt_rst_n: bt function enable io ;bt_wake: host wake-up bluetooth device ;bt_wak_host: bt device wake-up host ;bt_wake_invert: whether bt_wake use inverter between ap and module ; 0: not used, 1: used ;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [bt_para] bt_used = 0 bt_uart_id = 1 bt_rst_n = port:PL08<1><default><default><0> bt_wake = port:PL10<1><default><default><0> bt_host_wake = port:PL09<4><default><default><0> bt_wake_invert = 0 bt_host_wake_invert = 0 ls_int = port:PB07<1><default><default><0> pcm_ch = port:PB05<1><default><default><0> [gy_list_para] gy_det_used = 0 [ls_list_para] ls_det_used = 0 power_start = 3 pmu_temp_enable = 0
lichee_20170502_1607_全志R16的linux系统编译需要改动的文件_使用parrotv1.1的内核_没有外层目录.7z
05-02
rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ tar zxvf lichee_parrotv1.1_20161202.tar.gz rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ ll 总用量 10786992 drwx------ 4 rootroot rootroot 4096 5月 2 14:48 ./ drwxrwxrwx 18 rootroot rootroot 4096 5月 2 13:50 ../ -rwx------ 1 rootroot rootroot 8557328646 12月 2 16:08 android_parrotv1.1_20161202.tar.gz* drwxrwxr-x 7 rootroot rootroot 4096 12月 2 15:52 lichee/ -rwx------ 1 rootroot rootroot 2488523424 12月 2 16:15 lichee_parrotv1.1_20161202.tar.gz* drwxrwxr-x 8 rootroot rootroot 4096 5月 2 14:40 parrotv1p1_lichee/ rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ cd lichee/ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ll 总用量 36 drwxrwxr-x 7 rootroot rootroot 4096 12月 2 15:52 ./ drwx------ 4 rootroot rootroot 4096 5月 2 14:48 ../ drwxrwxr-x 8 rootroot rootroot 4096 12月 2 15:51 brandy/ drwxrwxr-x 15 rootroot rootroot 4096 12月 2 15:52 buildroot/ -r-xr-xr-x 1 rootroot rootroot 55 12月 2 15:52 build.sh* drwxrwxr-x 26 rootroot rootroot 4096 12月 2 15:52 linux-3.4/ -r--r--r-- 1 rootroot rootroot 232 12月 2 15:52 README drwxrwxr-x 6 rootroot rootroot 4096 12月 2 15:51 .repo/ drwxrwxr-x 7 rootroot rootroot 4096 12月 2 15:52 tools/ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux 3. tina Choice: 2 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. bell-one 1. evb 2. evb-20 3. evb-30 4. evb-rtl8723bs 5. sc3813r Choice: 3 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh KCONFIG_AUTOCONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/tristate.config BUILDROOT_CONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf --silentoldconfig Config.in # # make dependencies written to .auto.deps # ATTENTION buildroot devels! # See top of this file before playing with this auto-preprequisites! # make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot' You must install 'makeinfo' on your build machine makeinfo is usually part of the texinfo package in your distribution make: *** [dependencies] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ d/buildroot-config/conf.o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/zconf.tab.o -o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf rm /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/zconf.tab.c make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot/package/config' # # configuration written to /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config # make:离开目录“/home/wwt/linux_r16/lichee/buildroot” make:进入目录'/home/wwt/linux_r16/lichee/buildroot' /usr/bin/make -j6 O=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot silentoldconfig make[1]: 正在进入目录 `/home/wwt/linux_r16/lichee/buildroot' GEN /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/Makefile KCONFIG_AUTOCONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/tristate.config BUILDROOT_CONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf --silentoldconfig Config.in # # make dependencies written to .auto.deps # ATTENTION buildroot devels! # See top of this file before playing with this auto-preprequisites! # make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot' You must install 'makeinfo' on your build machine makeinfo is usually part of the texinfo package in your distribution make: *** [dependencies] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ sudo apt-get install texinfo [sudo] password for rootroot: 正在读取软件包列表... 完成 正在分析软件包的依赖关系树 正在读取状态信息... 完成 下列软件包是自动安装的并且现在不需要了： fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libfakeroot Use 'apt-get autoremove' to remove them. 将会安装下列额外的软件包： libencode-locale-perl libfile-listing-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libintl-perl libio-html-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libnet-http-perl libtext-unidecode-perl libwww-perl libwww-robotrules-perl libxml-libxml-perl libxml-namespacesupport-perl libxml-parser-perl libxml-sax-base-perl libxml-sax-expat-perl libxml-sax-perl 建议安装的软件包： libdata-dump-perl libintl-xs-perl libcrypt-ssleay-perl libauthen-ntlm-perl texinfo-doc-nonfree 下列【新】软件包将被安装： libencode-locale-perl libfile-listing-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libintl-perl libio-html-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libnet-http-perl libtext-unidecode-perl libwww-perl libwww-robotrules-perl libxml-libxml-perl libxml-namespacesupport-perl libxml-parser-perl libxml-sax-base-perl libxml-sax-expat-perl libxml-sax-perl texinfo 升级了 0 个软件包，新安装了 28 个软件包，要卸载 0 个软件包，有 737 个软件包未被升级。 需要下载 3,425 kB 的软件包。 解压缩后会消耗掉 13.0 MB 的额外空间。 您希望继续执行吗？ [Y/n] y 获取：1 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libencode-locale-perl all 1.03-1 [12.4 kB] 获取：2 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-date-perl all 6.02-1 [10.4 kB] 获取：3 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libfile-listing-perl all 6.04-1 [9,774 B] 获取：4 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libfont-afm-perl all 1.20-1 [14.3 kB] 获取：5 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-tagset-perl all 3.20-2 [13.5 kB] 获取：6 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-parser-perl amd64 3.71-1build1 [98.2 kB] 获取：7 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libio-html-perl all 1.00-1 [15.7 kB] 获取：8 http://cn.archive.ubuntu.com/ubuntu/ trusty/main liblwp-mediatypes-perl all 6.02-1 [21.7 kB] 获取：9 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-message-perl all 6.06-1 [78.7 kB] 获取：10 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-form-perl all 6.03-1 [23.5 kB] 获取：11 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-tree-perl all 5.03-1 [215 kB] 获取：12 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-format-perl all 2.11-1 [44.7 kB] 获取：13 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-cookies-perl all 6.00-2 [23.3 kB] 获取：14 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-daemon-perl all 6.01-1 [17.0 kB] 获取：15 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-negotiate-perl all 6.00-2 [13.4 kB] 获取：16 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libintl-perl all 1.23-1build1 [1,204 kB] 获取：17 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libnet-http-perl all 6.06-1 [24.2 kB] 获取：18 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libwww-robotrules-perl all 6.01-1 [14.1 kB] 获取：19 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libwww-perl all 6.05-2 [146 kB] 获取：20 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main liblwp-protocol-https-perl all 6.04-2ubuntu0.1 [7,644 B] 获取：21 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libtext-unidecode-perl all 0.04-2 [115 kB] 获取：22 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-namespacesupport-perl all 1.11-1 [13.2 kB] 获取：23 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-sax-base-perl all 1.07-1 [21.5 kB] 获取：24 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-sax-perl all 0.99+dfsg-2ubuntu1 [64.6 kB] 获取：25 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main libxml-libxml-perl amd64 2.0108+dfsg-1ubuntu0.1 [337 kB] 获取：26 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-parser-perl amd64 2.41-1build3 [294 kB] 获取：27 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-sax-expat-perl all 0.40-2 [11.5 kB] 获取：28 http://cn.archive.ubuntu.com/ubuntu/ trusty/main texinfo amd64 5.2.0.dfsg.1-2 [561 kB] 下载 3,425 kB，耗时 2秒 (1,303 kB/s) Selecting previously unselected package libencode-locale-perl. (正在读取数据库 ... 系统当前共安装有 213805 个文件和目录。) Preparing to unpack .../libencode-locale-perl_1.03-1_all.deb ... Unpacking libencode-locale-perl (1.03-1) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../libhttp-date-perl_6.02-1_all.deb ... Unpacking libhttp-date-perl (6.02-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../libfile-listing-perl_6.04-1_all.deb ... Unpacking libfile-listing-perl (6.04-1) ... Selecting previously unselected package libfont-afm-perl. Preparing to unpack .../libfont-afm-perl_1.20-1_all.deb ... Unpacking libfont-afm-perl (1.20-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../libhtml-tagset-perl_3.20-2_all.deb ... Unpacking libhtml-tagset-perl (3.20-2) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../libhtml-parser-perl_3.71-1build1_amd64.deb ... Unpacking libhtml-parser-perl (3.71-1build1) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../libio-html-perl_1.00-1_all.deb ... Unpacking libio-html-perl (1.00-1) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../liblwp-mediatypes-perl_6.02-1_all.deb ... Unpacking liblwp-mediatypes-perl (6.02-1) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../libhttp-message-perl_6.06-1_all.deb ... Unpacking libhttp-message-perl (6.06-1) ... Selecting previously unselected package libhtml-form-perl. Preparing to unpack .../libhtml-form-perl_6.03-1_all.deb ... Unpacking libhtml-form-perl (6.03-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../libhtml-tree-perl_5.03-1_all.deb ... Unpacking libhtml-tree-perl (5.03-1) ... Selecting previously unselected package libhtml-format-perl. Preparing to unpack .../libhtml-format-perl_2.11-1_all.deb ... Unpacking libhtml-format-perl (2.11-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../libhttp-cookies-perl_6.00-2_all.deb ... Unpacking libhttp-cookies-perl (6.00-2) ... Selecting previously unselected package libhttp-daemon-perl. Preparing to unpack .../libhttp-daemon-perl_6.01-1_all.deb ... Unpacking libhttp-daemon-perl (6.01-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../libhttp-negotiate-perl_6.00-2_all.deb ... Unpacking libhttp-negotiate-perl (6.00-2) ... Selecting previously unselected package libintl-perl. Preparing to unpack .../libintl-perl_1.23-1build1_all.deb ... Unpacking libintl-perl (1.23-1build1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../libnet-http-perl_6.06-1_all.deb ... Unpacking libnet-http-perl (6.06-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../libwww-robotrules-perl_6.01-1_all.deb ... Unpacking libwww-robotrules-perl (6.01-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../libwww-perl_6.05-2_all.deb ... Unpacking libwww-perl (6.05-2) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../liblwp-protocol-https-perl_6.04-2ubuntu0.1_all.deb ... Unpacking liblwp-protocol-https-perl (6.04-2ubuntu0.1) ... Selecting previously unselected package libtext-unidecode-perl. Preparing to unpack .../libtext-unidecode-perl_0.04-2_all.deb ... Unpacking libtext-unidecode-perl (0.04-2) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../libxml-namespacesupport-perl_1.11-1_all.deb ... Unpacking libxml-namespacesupport-perl (1.11-1) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../libxml-sax-base-perl_1.07-1_all.deb ... Unpacking libxml-sax-base-perl (1.07-1) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../libxml-sax-perl_0.99+dfsg-2ubuntu1_all.deb ... Unpacking libxml-sax-perl (0.99+dfsg-2ubuntu1) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../libxml-libxml-perl_2.0108+dfsg-1ubuntu0.1_amd64.deb ... Unpacking libxml-libxml-perl (2.0108+dfsg-1ubuntu0.1) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../libxml-parser-perl_2.41-1build3_amd64.deb ... Unpacking libxml-parser-perl (2.41-1build3) ... Selecting previously unselected package libxml-sax-expat-perl. Preparing to unpack .../libxml-sax-expat-perl_0.40-2_all.deb ... Unpacking libxml-sax-expat-perl (0.40-2) ... Selecting previously unselected package texinfo. Preparing to unpack .../texinfo_5.2.0.dfsg.1-2_amd64.deb ... Unpacking texinfo (5.2.0.dfsg.1-2) ... Processing triggers for man-db (2.6.7.1-1) ... Processing triggers for doc-base (0.10.5) ... Processing 1 added doc-base file... 正在设置 libencode-locale-perl (1.03-1) ... 正在设置 libhttp-date-perl (6.02-1) ... 正在设置 libfile-listing-perl (6.04-1) ... 正在设置 libfont-afm-perl (1.20-1) ... 正在设置 libhtml-tagset-perl (3.20-2) ... 正在设置 libhtml-parser-perl (3.71-1build1) ... 正在设置 libio-html-perl (1.00-1) ... 正在设置 liblwp-mediatypes-perl (6.02-1) ... 正在设置 libhttp-message-perl (6.06-1) ... 正在设置 libhtml-form-perl (6.03-1) ... 正在设置 libhtml-tree-perl (5.03-1) ... 正在设置 libhtml-format-perl (2.11-1) ... 正在设置 libhttp-cookies-perl (6.00-2) ... 正在设置 libhttp-daemon-perl (6.01-1) ... 正在设置 libhttp-negotiate-perl (6.00-2) ... 正在设置 libintl-perl (1.23-1build1) ... 正在设置 libnet-http-perl (6.06-1) ... 正在设置 libwww-robotrules-perl (6.01-1) ... 正在设置 libtext-unidecode-perl (0.04-2) ... 正在设置 libxml-namespacesupport-perl (1.11-1) ... 正在设置 libxml-sax-base-perl (1.07-1) ... 正在设置 libxml-sax-perl (0.99+dfsg-2ubuntu1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version 正在设置 libxml-libxml-perl (2.0108+dfsg-1ubuntu0.1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version 正在设置 texinfo (5.2.0.dfsg.1-2) ... Running mktexlsr. This may take some time. ... done. 正在设置 libwww-perl (6.05-2) ... 正在设置 liblwp-protocol-https-perl (6.04-2ubuntu0.1) ... 正在设置 libxml-parser-perl (2.41-1build3) ... 正在设置 libxml-sax-expat-perl (0.40-2) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::Expat with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh http://blog.csdn.net/linuxarmsummary/article/details/12775457 msgfmt包错误 makeinfo 包错误 e.o -MD -MP -MF .deps/execute.Tpo -c -o execute.o execute.c /usr/bin/gcc -std=gnu99 -I. -O2 -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/include -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/include -MT exitfail.o -MD -MP -MF .deps/exitfail.Tpo -c -o exitfail.o exitfail.c In file included from clean-temp.h:22:0, from clean-temp.c:23: ./stdio.h:456:1: error: 'gets' undeclared here (not in a function) _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead"); ^ mv -f .deps/exitfail.Tpo .deps/exitfail.Po /usr/bin/gcc -std=gnu99 -I. -O2 -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/include -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/include -MT fatal-signal.o -MD -MP -MF .deps/fatal-signal.Tpo -c -o fatal-signal.o fatal-signal.c mv -f .deps/c-ctype.Tpo .deps/c-ctype.Po /usr/bin/gcc -std=gnu99 -I. -O2 -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/include -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/include -MT fd-safer-flag.o -MD -MP -MF .deps/fd-safer-flag.Tpo -c -o fd-safer-flag.o fd-safer-flag.c mv -f .deps/c-stack.Tpo .deps/c-stack.Po make[4]: *** [clean-temp.o] Error 1 make[4]: *** Waiting for unfinished jobs.... mv -f .deps/execute.Tpo .deps/execute.Po mv -f .deps/fd-safer-flag.Tpo .deps/fd-safer-flag.Po mv -f .deps/fatal-signal.Tpo .deps/fatal-signal.Po mv -f .deps/gl_avltree_oset.Tpo .deps/gl_avltree_oset.Po make[4]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/lib' make[3]: *** [all] Error 2 make[3]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/lib' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15' make[1]: *** [all] 错误 2 make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15' make: *** [/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/.stamp_built] 错误 2 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ find . -name stdio.in.h ./out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/lib/stdio.in.h rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ Z:\home\wwt\linux_r16\lichee\out\sun8iw5p1\linux\common\buildroot\build\host-m4-1.4.15\lib\stdio.in.h // 2017/5/2 14:13 wenyuanbo add!!!! //_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead"); #if defined(__GLIBC__) && !defined(__UCLIBC__) && !__GLIBC_PREREQ(2, 16) _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead"); #endif http://www.cnblogs.com/hjj801006/p/3988220.html 'gets' undeclared here (not in a function) rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh make[3]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/lib' Making install in doc make[3]: Entering directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/doc' restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/sh /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/build-aux/missing --run makeinfo --version) >/dev/null 2>&1; then \ for f in autoconf.info autoconf.info-[0-9] autoconf.info-[0-9][0-9] autoconf.i[0-9] autoconf.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/sh /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/build-aux/missing --run makeinfo --no-split -I . \ -o autoconf.info autoconf.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./autoconf.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc conftest.c:14625: must be after `@defmac' to use `@defmacx' make[3]: *** [autoconf.info] Error 1 make[3]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/doc' make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65' make[1]: *** [install] 错误 2 make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65' make: *** [/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/.stamp_host_installed] 错误 2 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ find . -name autoconf.texi ./out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/doc/autoconf.texi rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ Z:\home\wwt\linux_r16\lichee\out\sun8iw5p1\linux\common\buildroot\build\host-autoconf-2.65\doc\autoconf.texi @r{[}@var{\varname\}@r{]}@c （修改为：） @r{[}@var{\varname\}@r{]} @r{[}@var{\varname\} = @samp{\default\}@r{]}@c （修改为：） @r{[}@var{\varname\} = @samp{\default\}@r{]} http://blog.csdn.net/laohuang1122/article/details/44098291/ Ubuntu14.04编译Allwinner lichee 两个出错解决方法 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh libtool: install: ranlib /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/lib/libfakeroot.a libtool: finish: PATH="/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/external-toolchain/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/arm-linux-androideabi/bin:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/opt/jdk1.6.0_45/bin:/opt/jdk1.6.0_45/jre/bin:/sbin" ldconfig -n /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/lib ---------------------------------------------------------------------- Libraries have been installed in: /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- test -z "/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin" || /bin/mkdir -p "/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin" /bin/sh ./libtool --mode=install /usr/bin/install -c 'faked' '/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin/faked' libtool: install: /usr/bin/install -c faked /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin/faked make[3]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-fakeroot-1.9.5' make[2]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-fakeroot-1.9.5' make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-fakeroot-1.9.5' rm -rf /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs mkdir /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs cp package/makedevs/makedevs.c /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs cc -Wall -Werror -O2 /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c -o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c: In function ‘main’: /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c:374:6: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable] int ret = EXIT_SUCCESS; ^ cc1: all warnings being treated as errors make: *** [/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build rootfs Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ find . -name makedevs.c ./buildroot/package/makedevs/makedevs.c ./out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c ./out/sun8iw5p1/linux/common/buildroot/build/busybox-1.18.3/miscutils/makedevs.c rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ http://blog.csdn.net/laohuang1122/article/details/44098291/ Ubuntu14.04编译Allwinner lichee 两个出错解决方法 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh /local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/arm-linux-androideabi/bin:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/opt/jdk1.6.0_45/bin:/opt/jdk1.6.0_45/jre/bin"" >> /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/_fakeroot.fs chmod a+x /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/_fakeroot.fs /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin/fakeroot -- /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/_fakeroot.fs rootdir=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/target table='target/generic/device_table.txt' Warning: skip syncing -d /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/target /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/images/rootfs.ext4 -N 1399 -b 42633 tune2fs 1.42.9 (4-Feb-2014) Creating journal inode: 完成 This filesystem will be automatically checked every 20 mounts or 0 days, whichever comes first. Use tune2fs -c or -i to override. e2fsck 1.42.9 (4-Feb-2014) 文件系统缺少UUID；正在生成一个。 Adding dirhash hint to 文件系统. /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/images/rootfs.ext4: clean, 1009/1440 files, 38102/42633 blocks busybox directfb directfb-examples divine dosfstools e2fsprogs ethtool ext4-utils freetype fsck-msdos fuse-exfat libfuse i2c-tools input-tools iostat iperf iw jpeg libnl libpcap libpng memstat memtester ntfs-3g openssh openssl portmap strace stress sysstat szrz tcpdump tiobench tslib udev which wireless_tools wpa_supplicant zlib target-generic-hostname target-generic-issue target-generic-getty-busybox target-finalize target-purgelocales /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/sbin/:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/external-toolchain/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/arm-linux-androideabi/bin:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/opt/jdk1.6.0_45/bin:/opt/jdk1.6.0_45/jre/bin make:离开目录“/home/wwt/linux_r16/lichee/buildroot” INFO: build rootfs OK. INFO: ---------------------------------------- INFO: build lichee OK. INFO: ---------------------------------------- rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh pack INFO: packing firmware ... copying tools file copying configs file ./out/aultls32.fex ./out/aultools.fex ./out/cardscript.fex ./out/cardtool.fex ./out/diskfs.fex ./out/env_burn.cfg ./out/env.cfg ./out/image.cfg "./out/image_linux.cfg" -> "./out/image.cfg" ./out/split_xxxx.fex ./out/sys_config.fex ./out/sys_partition_dragonboard.fex ./out/sys_partition_dump.fex ./out/sys_partition.fex "./out/sys_partition_linux.fex" -> "./out/sys_partition.fex" ./out/sys_partition_private.fex ./out/sys_partition_tina.fex ./out/test_config.fex ./out/usbtool.fex ./out/usbtool_test.fex copying boot resource copying boot file packing for linux normal /home/wwt/linux_r16/lichee/tools/pack/pctools/linux/eDragonEx/ /home/wwt/linux_r16/lichee/tools/pack/out Begin Parse sys_partion.fex Add partion boot-resource.fex BOOT-RESOURCE_FEX Add partion very boot-resource.fex BOOT-RESOURCE_FEX FilePath: boot-resource.fex FileLength=453400Add partion env.fex ENV_FEX000000000 Add partion very env.fex ENV_FEX000000000 FilePath: env.fex FileLength=20000Add partion boot.fex BOOT_FEX00000000 Add partion very boot.fex BOOT_FEX00000000 FilePath: boot.fex FileLength=c5a000Add partion rootfs.fex ROOTFS_FEX000000 Add partion very rootfs.fex ROOTFS_FEX000000 FilePath: rootfs.fex FileLength=29a2400sys_config.fex Len: 0xf450 config.fex Len: 0x9ac8 split_xxxx.fex Len: 0x200 sys_partition.fex Len: 0xa80 boot0_nand.fex Len: 0x8000 boot0_sdcard.fex Len: 0x8000 u-boot.fex Len: 0xc4000 fes1.fex Len: 0x1fc0 usbtool.fex Len: 0x23000 aultools.fex Len: 0x26ead aultls32.fex Len: 0x238dd cardtool.fex Len: 0x14000 cardscript.fex Len: 0x6ea sunxi_mbr.fex Len: 0x10000 dlinfo.fex Len: 0x4000 arisc.fex Len: 0x2ed88 vmlinux.fex Len: 0x2c78baa boot-resource.fex Len: 0x453400 Vboot-resource.fex Len: 0x4 env.fex Len: 0x20000 Venv.fex Len: 0x4 boot.fex Len: 0xc5a000 Vboot.fex Len: 0x4 rootfs.fex Len: 0x29a2400 Vrootfs.fex Len: 0x4 BuildImg 0 Dragon execute image.cfg SUCCESS ! ----------image is at---------- /home/wwt/linux_r16/lichee/tools/pack/sun8iw5p1_linux_evb-30_uart0.img pack finish rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$
ap6212a0_a33_sc3817r_神舟验证版本_借用nvram_ap6210这个配置文件_20170626_1834没有外层目录.7z
06-26
调通sina33下的AP6212A0（WIFI+BT） 大文实验室/大文哥 壹捌陆捌零陆捌捌陆捌贰 wb4916 AT qq.com 完成时间：2017/6/26 11:01 版本：V1.1 本文参照： 《A33 wifi移植说明书.pdf》 还有就是全志R16的parrotv1.1的官方SDK（Android4.4.2） 1、打开AP6212的BT，关闭rtl8723bs的BT： [ 3.141273] Bluetooth: HCI UART driver ver 2.2 [ 3.146210] Bluetooth: HCI H4 protocol initialized [ 3.151563] Bluetooth: HCI BCSP protocol initialized [ 3.157154] usbcore: registered new interface driver btusb [ 3.163282] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.169599] Bluetooth: BlueSleep Mode Driver Ver 1.1 [ 3.175402] Bluetooth: get rtl8723bs rtl8723bs_bt_host_wake gpio failed [ 3.953017] Bluetooth: RFCOMM TTY layer initialized [ 3.958456] Bluetooth: RFCOMM socket layer initialized [ 3.964183] Bluetooth: RFCOMM ver 1.11 [ 3.968340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.968638] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.968734] [mmc]: mclk 0xf1c20090 0xc100000b [ 3.989421] Bluetooth: BNEP filters: protocol multicast [ 3.995242] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.001921] L2TP core driver, V2.0 [ 4.005706] PPPoL2TP kernel driver, V2.0 [ 4.010070] L2TP IP encapsulation support (L2TPv3) [ 4.015468] L2TP netlink interface [ 4.019264] L2TP ethernet pseudowire support (L2TPv3) [ 4.023860] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B [ 4.023929] [mmc]: mclk 0xf1c20090 0xc100000b [ 4.040272] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 4.048780] ThumbEE CPU extension supported. [ 4.053550] Registering SWP/SWPB emulation handler [ 4.059269] [rfkill]: rfkill set power 1 [ 4.063652] gpio ap6xxx_bt_regon set val 0, act val 0 正常启动的BT加载： [ 3.207764] Bluetooth: HCI UART driver ver 2.2 [ 3.212725] Bluetooth: HCI H4 protocol initialized [ 3.218045] Bluetooth: HCI BCSP protocol initialized [ 3.223671] usbcore: registered new interface driver btusb [ 3.229766] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.236243] Bluetooth: MSM Sleep Mode Driver Ver 1.2 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r$ ll rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. evb 1. maple 2. redwood 3. y2 4. y3 Choice: 4 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4$ make ARCH=arm menuconfig [*] Networking support ---> <*> Bluetooth subsystem support ---> Bluetooth device drivers ---> < > Broadcom Bluetooth Low Power Manager Support <*> Realtek Bluesleep driver support 修改为： <*> Broadcom Bluetooth Low Power Manager Support < > An inverter between bt hostwake pin and cpu (NEW) < > Realtek Bluesleep driver support 2、（这个不修改：） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\overlay\frameworks\base\core\res\res\values\config.xml <!-- List of regexpressions describing the interface (if any) that represent tetherable Wifi interfaces. If the device doesn't want to support tethering over Wifi this should be empty. An example would be "softap.*" --> <string-array translatable="false" name="config_tether_wifi_regexs"> <item>"wlan0"</item> </string-array> <!-- List of regexpressions describing the interface (if any) that represent tetherable bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this should be empty. --> <!-- default: disable Bluetooth PAN feature --> <string-array translatable="false" name="config_tether_bluetooth_regexs"> <item>"bt-pan"</item> </string-array> 3、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\astar_y3.mk # ap6181/6210/6330 sdio wifi fw and nvram #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6181/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6210/device-bcm.mk) $(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6212/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6330/device-bcm.mk) #rtl8723bs bt fw and config #$(call inherit-product, hardware/realtek/bluetooth/rtl8723bs/firmware/rtlbtfw_cfg.mk) # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-y3/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini #add gms features #PRODUCT_COPY_FILES += \ # frameworks/native/data/etc/android.hardware.faketouch.xml:system/etc/permissions/android.hardware.faketouch.xml \ # frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ # frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml # 3G Data Card Packages #PRODUCT_PACKAGES += \ # u3gmonitor \ # chat \ # rild \ # pppd # 3G Data Card Configuration Flie #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/ip-down:system/etc/ppp/ip-down \ # device/softwinner/polaris-common/rild/ip-up:system/etc/ppp/ip-up \ # device/softwinner/polaris-common/rild/3g_dongle.cfg:system/etc/3g_dongle.cfg \ # device/softwinner/polaris-common/rild/usb_modeswitch:system/bin/usb_modeswitch \ # device/softwinner/polaris-common/rild/call-pppd:system/xbin/call-pppd \ # device/softwinner/polaris-common/rild/usb_modeswitch.sh:system/xbin/usb_modeswitch.sh \ # device/softwinner/polaris-common/rild/apns-conf_sdk.xml:system/etc/apns-conf.xml \ # device/softwinner/polaris-common/rild/libsoftwinner-ril.so:system/lib/libsoftwinner-ril.so #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/init.3gdongle.rc:root/init.sunxi.3gdongle.rc # 3G Data Card usb modeswitch File #PRODUCT_COPY_FILES += \ # $(call find-copy-subdir-files,*,device/softwinner/polaris-common/rild/usb_modeswitch.d,system/etc/usb_modeswitch.d) PRODUCT_PROPERTY_OVERRIDES += \ ro.sw.embeded.telephony = false PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.timezone=Asia/Shanghai \ persist.sys.language=zh \ persist.sys.country=CN PRODUCT_PACKAGES += Bluetooth #PRODUCT_PROPERTY_OVERRIDES += \ # ro.product.8723b_bt.used=true #GPS Feature #PRODUCT_PACKAGES += gps.polaris #BOARD_USES_GPS_TYPE := simulator #PRODUCT_COPY_FILES += frameworks/native/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml # evb logger PRODUCT_COPY_FILES += \ device/softwinner/astar-y3/tools/logger.sh:system/bin/logger.sh PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 ro.udisk.lable=Polaris \ ro.font.scale=1.0 \ ro.hwa.force=false \ rw.logger=0 \ ro.sys.bootfast=true \ debug.hwc.showfps=0 \ debug.hwui.render_dirty_regions=false #ro.sys.storage_type = emulated \ #for gms #PRODUCT_PROPERTY_OVERRIDES += \ # ro.sys.mutedrm=true \ # ro.adb.secure=1 PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=213 \ ro.product.firmware=v2.0 $(call inherit-product-if-exists, device/softwinner/astar-y3/modules/modules.mk) DEVICE_PACKAGE_OVERLAYS := device/softwinner/astar-y3/overlay PRODUCT_CHARACTERISTICS := tablet # Overrides PRODUCT_AAPT_CONFIG := xlarge hdpi xhdpi large PRODUCT_AAPT_PREF_CONFIG := xhdpi PRODUCT_BRAND := Allwinner PRODUCT_NAME := astar_y3 PRODUCT_DEVICE := astar-y3 PRODUCT_MODEL := QUAD-CORE A33 y3 PRODUCT_MANUFACTURER := softwinner #include device/softwinner/polaris-common/prebuild/google/products/gms_base.mk 4、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\BoardConfig.mk # wifi and bt configuration # 1. Wifi Configuration # 1.1 realtek wifi support # 1.1 realtek wifi configuration #BOARD_WIFI_VENDOR := realtek ifeq ($(BOARD_WIFI_VENDOR), realtek) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl SW_BOARD_USR_WIFI := rtl8188eu BOARD_WLAN_DEVICE := rtl8188eu #SW_BOARD_USR_WIFI := rtl8723au #BOARD_WLAN_DEVICE := rtl8723au #SW_BOARD_USR_WIFI := rtl8723bs #BOARD_WLAN_DEVICE := rtl8723bs endif # 1.2 broadcom wifi support BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" #SW_BOARD_USR_WIFI := AP6181 #SW_BOARD_USR_WIFI := AP6210 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40181a2.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40181a2_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40181a2_apsta.bin" # 2017/6/21 15:11 wenyuanbo configure ap6212 use ap6210 SW_BOARD_USR_WIFI := AP6212 WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm43438a0.bin" WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm43438a0_p2p.bin" WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm43438a0_apsta.bin" #SW_BOARD_USR_WIFI := AP6330 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40183b2_ag.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40183b2_ag_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40183b2_ag_apsta.bin" endif #1.3 eag wifi config #BOARD_WIFI_VENDOR := eagle ifeq ($(BOARD_WIFI_VENDOR), eagle) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_eagle BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_eagle SW_BOARD_USR_WIFI := esp8089 BOARD_WLAN_DEVICE := esp8089 endif # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor BOARD_HAVE_BLUETOOTH := true BOARD_HAVE_BLUETOOTH_BCM := true #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6210 SW_BOARD_HAVE_BLUETOOTH_NAME := ap6212 #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6330 #BOARD_HAVE_BLUETOOTH_RTK := true #BLUETOOTH_HCI_USE_RTK_H5 := true #SW_BOARD_HAVE_BLUETOOTH_NAME := rtl8723bs 5、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\init.sun8i.rc on early-fs mount_all /fstab.sun8i setprop ro.crypto.fuse_sdcard true insmod /system/vendor/modules/disp.ko insmod /system/vendor/modules/lcd.ko insmod /system/vendor/modules/mali.ko insmod /system/vendor/modules/leds-sunxi.ko insmod /system/vendor/modules/bcmdhd.ko insmod /system/vendor/modules/bcm_btlpm.ko #2G or 3G init.rc # import init.sunxi.3gdongle.rc ## 1. realtek & eagle wifi service ## 1.1 realtek & eagle wifi sta service #service wpa_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # ## 1.2 realtek & eagle wifi sta p2p concurrent service #service p2p_supplicant /system/bin/wpa_supplicant \ # -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ # -e/data/misc/wifi/entropy.bin -N \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -g@android:wpa_wlan0 # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # 2. broadcom wifi service # 2.1 broadcom wifi station and softap service wpa_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets \ -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot # 2.2 broadcom wifi sta p2p concurrent service service p2p_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets -N \ -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ -I/system/etc/wifi/p2p_supplicant_overlay.conf \ -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin \ -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot 6、（不需要修改） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\ueventd.sun8i.rc 7、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml <integer name="def_screen_off_timeout">1800000</integer> <bool name="def_lockscreen_disabled">true</bool> 8、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\services\java\com\android\server\BatteryService.java // private static final boolean DEBUG = false; private static final boolean DEBUG = true; private void sendIntentLocked() { // Pack up the values and broadcast them to everyone final Intent intent = new Intent(Intent.ACTION_BATTERY_CHANGED); intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY | Intent.FLAG_RECEIVER_REPLACE_PENDING); int icon = getIconLocked(mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_STATUS, mBatteryProps.batteryStatus); intent.putExtra(BatteryManager.EXTRA_HEALTH, mBatteryProps.batteryHealth); intent.putExtra(BatteryManager.EXTRA_PRESENT, mBatteryProps.batteryPresent); //intent.putExtra(BatteryManager.EXTRA_LEVEL, mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_LEVEL, 100); intent.putExtra(BatteryManager.EXTRA_SCALE, BATTERY_SCALE); intent.putExtra(BatteryManager.EXTRA_ICON_SMALL, icon); intent.putExtra(BatteryManager.EXTRA_PLUGGED, mPlugType); //intent.putExtra(BatteryManager.EXTRA_VOLTAGE, mBatteryProps.batteryVoltage); intent.putExtra(BatteryManager.EXTRA_VOLTAGE, 4200); intent.putExtra(BatteryManager.EXTRA_TEMPERATURE, mBatteryProps.batteryTemperature); intent.putExtra(BatteryManager.EXTRA_TECHNOLOGY, mBatteryProps.batteryTechnology); intent.putExtra(BatteryManager.EXTRA_INVALID_CHARGER, mInvalidCharger); if (DEBUG) { Slog.d(TAG, "2016/12/05 10:41 wenyuanbo **** Sending ACTION_BATTERY_CHANGED. level:" + mBatteryProps.batteryLevel + ", scale:" + BATTERY_SCALE + ", status:" + mBatteryProps.batteryStatus + ", health:" + mBatteryProps.batteryHealth + ", present:" + mBatteryProps.batteryPresent + ", voltage: " + mBatteryProps.batteryVoltage + ", temperature: " + mBatteryProps.batteryTemperature + ", technology: " + mBatteryProps.batteryTechnology + ", AC powered:" + mBatteryProps.chargerAcOnline + ", USB powered:" + mBatteryProps.chargerUsbOnline + ", Wireless powered:" + mBatteryProps.chargerWirelessOnline + ", icon:" + icon + ", invalid charger:" + mInvalidCharger); } mHandler.post(new Runnable() { @Override public void run() { ActivityManagerNative.broadcastStickyIntent(intent, null, UserHandle.USER_ALL); } }); } 9、（直接拷贝同目录下的ap6210：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\Android.mk LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_MODULE := bt_vendor.conf LOCAL_MODULE_CLASS := ETC LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/bluetooth LOCAL_MODULE_TAGS := eng LOCAL_SRC_FILES := $(LOCAL_MODULE) include $(BUILD_PREBUILT) R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\bt_vendor.conf # UART device port where Bluetooth controller is attached UartPort = /dev/ttyS1 # Firmware patch file location FwPatchFilePath = /system/vendor/modules/ # Firmware Name FwPatchFileName = bcm43438a0.hcd 10、新增：vnd_astar-y3-ap6212.txt，直接拷贝：vnd_astar-y2-ap6210.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y3-ap6212.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y2-ap6210.txt BLUETOOTH_UART_DEVICE_PORT = "/dev/ttyS1" FW_PATCHFILE_LOCATION = "/system/vendor/modules/" LPM_IDLE_TIMEOUT_MULTIPLE = 5 UART_TARGET_BAUD_RATE = 1500000 BT_WAKE_VIA_PROC = TRUE #LPM_SLEEP_MODE = FALSE BTVND_DBG = TRUE BTHW_DBG = TRUE VNDUSERIAL_DBG = TRUE UPIO_DBG = TRUE 11、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\src\userial_vendor.c //#ifdef USE_AP6210_BT_MODULE #if defined(USE_AP6210_BT_MODULE) || defined(USE_AP6212_BT_MODULE) /* PATCH for AP6210. Will detect CTS(module side) to select transport mode*/ ALOGE("userial vendor open: USE AP6210 BT MODULE."); usleep(100000); close(vnd_userial.fd); if ((vnd_userial.fd = open(vnd_userial.port_name, O_RDWR)) == -1) { ALOGE("userial vendor open: unable to open %s", vnd_userial.port_name); return -1; } #endif //USE_AP6210_BT_MODULE 12、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\Android.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) LOCAL_CFLAGS += -DUSE_AP6210_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) LOCAL_CFLAGS += -DUSE_AP6212_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6330) include $(LOCAL_PATH)/conf/softwinner/ap6330/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) include $(LOCAL_PATH)/conf/softwinner/ap6210/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) include $(LOCAL_PATH)/conf/softwinner/ap6212/Android.mk endif 13、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\vnd_buildcfg.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6210.txt,$(basename $(TARGET_DEVICE)))) endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6212.txt,$(basename $(TARGET_DEVICE)))) endif 14、（这些AP6212的WIFI的bin文件和BT的hcd文件来自全志R16的SDK，当然也可以找正基原厂/代理商索取：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\bcm43438a0.hcd （根据ap6210修改：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\device-bcm.mk # # Copyright (C) 2008 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ######################## -include hardware/broadcom/wlan/bcmdhd/config/config-bcm.mk PRODUCT_COPY_FILES += \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0.bin:system/vendor/modules/fw_bcm43438a0.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_apsta.bin:system/vendor/modules/fw_bcm43438a0_apsta.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_p2p.bin:system/vendor/modules/fw_bcm43438a0_p2p.bin \ hardware/broadcom/wlan/firmware/ap6212/nvram_ap6210.txt:system/vendor/modules/nvram_ap6210.txt \ hardware/broadcom/wlan/firmware/ap6212/bcm43438a0.hcd:system/vendor/modules/bcm43438a0.hcd #hardware/broadcom/wlan/firmware/ap6212/config.txt:system/vendor/modules/config.txt ######################## R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_apsta.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_p2p.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\nvram_ap6212.txt 直接拷贝自nvram_ap6212.txt： R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\nvram_ap6210.txt 15、（可选修改：） R:\wyb\ap6212a0_a33_sc3817r\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java private BroadcastReceiver mBatteryInfoReceiver = new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { String action = intent.getAction(); if (Intent.ACTION_BATTERY_CHANGED.equals(action)) { int Level = intent.getIntExtra("level", 0); int Scale = intent.getIntExtra("scale", 100); Log.w(TAG, "2016/11/29 19:54 &&&& wenyuanbo battery Level" + Level); /* *Logic: *1.the battery level is lower then 5%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, give a dialog, press it and finish the activity. *5.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, also give a dialog for finishing the activity. * *by fuqiang. */ if(Level < 5) { Runnable runnable_close_camera = new Runnable() { @Override public void run() { //close the camera. // CameraActivity.this.finish(); } }; Log.w(TAG, "2016/11/29 18:20 **** wenyuanbo battery Level" + Level); showLocationDialog(); } /* *Logic: *1.the battery level is lhigher then 5% and lower than 15%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.whether in camera or in videocamera, make sure that the flash mode is supported. *5.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, forbidden the flash(gray icon), give a dialog to notise user. *6.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, forbidden the flash and give a notice dialog. *7.the dialog is only given once for each camera activity starting. * *by fuqiang. */ else if(Level < 16) { //close the flash mode. /* if (mIsLowBatteryDialogShown == false) { mRotateDialog.showAlertDialog( getString(R.string.warning), getString(R.string.low_battery_15), null, null, getString(R.string.close), null); mIsLowBatteryDialogShown = true; } */ } } } }; 16、（可选：） R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg bootdelay=3 loglevel=8 17、 R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\y3\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo1_vol = 3300 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800 ;---------------------------------------------------------------------------------- ;uart configuration ;uart_used = uart x enable ;uart_type = 2:2 wire,4:4 wire,8:8 wire, full function ;---------------------------------------------------------------------------------- [uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PF02<3><1><default><default> uart_rx = port:PF04<3><1><default><default> [uart1] uart_used = 1 uart_port = 1 uart_type = 4 uart_tx = port:PG06<2><1><default><default> uart_rx = port:PG07<2><1><default><default> uart_rts = port:PG08<2><1><default><default> uart_cts = port:PG09<2><1><default><default> [uart2] uart_used = 1 uart_type = 4 uart_tx = port:PB00<2><1><default><default> uart_rx = port:PB01<2><1><default><default> uart_rts = port:PB02<2><1><default><default> uart_cts = port:PB03<2><1><default><default> [uart3] uart_used = 0 uart_type = 4 uart_tx = port:PH06<3><1><default><default> uart_rx = port:PH07<3><1><default><default> uart_rts = port:PH08<3><1><default><default> uart_cts = port:PH09<3><1><default><default> [uart4] uart_used = 0 uart_port = 4 uart_type = 2 uart_tx = port:PA04<2><1><default><default> uart_rx = port:PA05<2><1><default><default> uart_rts = port:PA06<2><1><default><default> uart_cts = port:PA07<2><1><default><default> ;---------------------------------------------------------------------------------- ;capacitor tp configuration ;ctp_twi_id : twi controller ID ;ctp_twi_addr : I2C slave address, 7bit ;ctp_screen_max_x/_y : resolution of touch panel ;ctp_revert_x/_y_flag : whether need to revert x/y ;ctp_exchange_x_y_flag: whether need to exchange the value of x and y ;ctp_int_port : port for tp's interrupt signal ;ctp_wakeup : port for wakeup tp ;---------------------------------------------------------------------------------- [ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1 ctp_int_port = port:PL04<4><default><default><default> ctp_wakeup = port:PL03<1><default><default><1> ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io = ;-------------------------------------------------------------------------------- ; CTP automatic detection configuration ;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused ;Module name postposition 1 said detection, 0 means no detection. ;-------------------------------------------------------------------------------- [ctp_list_para] ctp_det_used = 1 ft5x_ts = 1 gt82x = 1 gslX680 = 1 gslX680new = 0 gt9xx_ts = 1 gt9xxf_ts = 0 tu_ts = 0 gt818_ts = 1 zet622x = 1 aw5306_ts = 1 icn83xx_ts = 0 [lcd0_para] lcd_used = 1 lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PD13<1><0><default><1> ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;lcd_bl_en = port:PL06<1><0><default><1> lcd_power = "axp22_dc1sw" lcdd0 = port:PD18<3><0><default><default> lcdd1 = port:PD19<3><0><default><default> lcdd2 = port:PD20<3><0><default><default> lcdd3 = port:PD21<3><0><default><default> lcdd4 = port:PD22<3><0><default><default> lcdd5 = port:PD23<3><0><default><default> lcdd6 = port:PD24<3><0><default><default> lcdd7 = port:PD25<3><0><default><default> lcdd8 = port:PD26<3><0><default><default> lcdd9 = port:PD27<3><0><default><default> ;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00<2><0><default><default> [pwm1_para] pwm_used = 1 pwm_positive = port:PH01<2><0><default><default> ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wifi_mod_sel: 0- none, 1- ap6181, 2- ap6210(wifi+bt), ; 3 - rtl8188eu, 4- rtl8723au(wifi+bt), ; 5 - rtl8723bs, 6- esp8089 ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wifi_mod_sel = 2 wifi_power = "axp22_dldo1" wifi_power_ext1 = "axp22_dldo2" wifi_power_ext2 = "axp22_aldo1" wifi_power_switch = ;wifi_power_switch = port:power0<1><0><default><0> ; 1 - ap6181 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><default><default><0> ;ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ;ap6xxx_lpo_use_apclk = 1 ; 2 - ap6210 sdio wifi gpio config ap6xxx_wl_regon = port:PL06<1><default><default><0> ;ap6xxx_wl_regon = port:PD13<1><default><default><0> ap6xxx_wl_host_wake = port:PL07<4><default><default><0> ap6xxx_bt_regon = port:PL08<1><default><default><0> ap6xxx_bt_wake = port:PL10<1><default><default><0> ap6xxx_bt_host_wake = port:PL09<4><default><default><0> ap6xxx_lpo_use_apclk = 1 ; 3 - rtl8188eu usb wifi gpio conifg ; 4 - rtl8723au usb wifi + bt ; 5 - rtl8723bs sdio wifi + bt ;rtl8723bs_chip_en = port:PL11<1><default><default><0> ;rtl8723bs_wl_regon = port:PL06<1><default><default><0> ;rtl8723bs_wl_host_wake = port:PL07<4><default><default><0> ;rtl8723bs_bt_regon = port:PL08<1><default><default><0> ;rtl8723bs_bt_wake = port:PL10<1><default><default><0> ;rtl8723bs_bt_host_wake = port:PL09<4><default><default><0> ;rtl8723bs_lpo_use_apclk = 0 ; 6 - eagle sdio wifi ;esp_wl_chip_en = port:PL03<1><default><default><0> ;esp_wl_rst = port:PL02<1><default><default><0> ;-------------------------------------------------------------------------------- ;blue tooth ;bt_used ---- blue tooth used (0- no used, 1- used) ;bt_uard_id ---- uart index ;-------------------------------------------------------------------------------- [bt_para] bt_used = 1 bt_uart_id = 1 power_start = 3 pmu_temp_enable = 0 18、 刷机之后，BT可以用。 传输4.5MB的JPG图片大概需要2分钟。 WIFI： 在设置→WLAN（打开之后）： shell@astar-y3:/ $ shell@astar-y3:/ $ [ 469.609956] init: computing context for service '/system/bin/wpa_supplicant' [ 469.618386] init: starting 'p2p_supplicant' [ 469.625739] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 469.673379] init: waitpid returned pid 2065, status = 0000ff00 [ 469.679923] init: process 'p2p_supplicant', pid 2065 exited [ 476.197334] sndpcm_unmute,line:1099 [ 451.464755] CPU1: Booted secondary processor [ 478.459403] CPU1: shutdown [ 478.462947] [hotplug]: cpu(0) try to kill cpu(1) [ 478.468478] [hotplug]: cpu1 is killed! . shell@astar-y3:/ $ 分析启动的log： [ 17.526849] gpio ap6xxx_wl_regon set val 1, act val 1 [ 17.632508] [ap6xxx]: sdio wifi power state: on [ 17.637576] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.637751] =========== WLAN placed in POWER ON ======== [ 17.654651] [mmc]: sdc1 card_power_on start... [ 17.659576] [mmc]: sdc1 power_supply is null [ 17.664322] [mmc]: sdc1 card_power_on ok [ 17.680039] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.690275] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.772361] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.781309] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.789448] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.799714] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.862032] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.872262] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.933953] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !! [ 17.941997] *******************Try sdio******************* [ 17.948400] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.958630] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.027775] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 18.035416] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.043087] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.051920] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 18.145287] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.155436] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.215346] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.225736] [mmc]: mclk 0xf1c2008c 0x8100000b [ 18.285675] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 18.296021] [mmc]: mclk 0xf1c2008c 0x8140030b [ 18.357915] mmc1: new high speed SDIO card at address 0001 [ 18.364532] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 18.364575] *******************sdio init ok******************* [ 18.377207] bcm_wlan_get_oob_irq enter. [ 18.381537] gpio [359] map to virq [7] ok [ 18.388851] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 18.396019] dhdsdio_probe_attach: unsupported chip: 0xa9a6 [ 18.402155] dhdsdio_probe: dhdsdio_probe_attach failed [ 18.407899] bcmsdh_probe: device attach failed [ 18.412981] [ 18.412984] Dongle Host Driver, version 1.88.45.3 (r420671) [ 18.412989] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 12:06:39 [ 18.428835] dhd_module_init: sdio_register_driver timeout or error [ 18.435928] gpio ap6xxx_wl_regon set val 0, act val 0 [ 18.541549] [ap6xxx]: sdio wifi power state: off [ 18.546679] =========== WLAN placed in POWER OFF ======== [ 18.546915] mmc1: card 0001 removed [ 18.546995] [mmc]: mmc not poweroff notifiy [ 18.547007] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 18.547160] [mmc]: sdc1 card_power_off start... [ 18.547166] [mmc]: sdc1 power_supply is null [ 18.547173] [mmc]: sdc1 card_power_off ok [ 18.631655] init: command 'insmod' r=-1 [ 18.636066] init: command 'insmod' r=-1 [ 18.658010] fs_mgr: swapon failed for /dev/block/zram0 [ 18.663804] init: command 'swapon_all' r=-1 [ 18.668504] init: processing action 0x58e70 (console_init) [ 18.675396] init: width = 1280 [ 18.678788] init: height = 800 [ 18.682224] init: s.st_size = 3145728 [ 18.686308] init: logo match failed!fbsize = 4096000 [ 18.718811] init: command 'console_init' r=0 [ 18.723628] init: processing action 0x55bf0 (fs) [ 18.730640] init: command 'mkdir' r=-2 [ 18.741901] init: command 'insmod' r=0 [ 18.752227] init: command 'insmod' r=0 [ 18.756491] init: command 'insmod' r=-1 [ 18.771211] init: command 'insmod' r=0 [ 18.779731] init: command 'insmod' r=0 [ 18.791739] init: command 'insmod' r=0 [ 18.803941] init: command 'insmod' r=0 [ 18.816178] init: command 'insmod' r=0 19、查找：（dhdsdio_probe_attach: unsupported chip: 0xa9a6） rootroot@rootroot-E400:~$ cd wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "unsupported chip" . -R ./dhd_sdio.c: DHD_ERROR(("%s: unsupported chip: 0xx\n", ./sbutils.c: SI_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko 匹配到二进制文件 ./sbutils.o rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ 经过确认： R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_sdio.c static bool dhdsdio_probe_attach(struct dhd_bus *bus, osl_t *osh, void *sdh, void *regsva, uint16 devid) { …… bcmsdh_chipinfo(sdh, bus->sih->chip, bus->sih->chiprev); if (!dhdsdio_chipmatch((uint16)bus->sih->chip)) { DHD_ERROR(("%s: unsupported chip: 0xx\n", __FUNCTION__, bus->sih->chip)); goto fail; } …… } 继续追踪： static bool dhdsdio_chipmatch(uint16 chipid) { if (chipid == BCM4325_CHIP_ID) return TRUE; if (chipid == BCM4329_CHIP_ID) return TRUE; if (chipid == BCM4315_CHIP_ID) return TRUE; if (chipid == BCM4319_CHIP_ID) return TRUE; if (chipid == BCM4336_CHIP_ID) return TRUE; if (chipid == BCM4330_CHIP_ID) return TRUE; if (chipid == BCM43237_CHIP_ID) return TRUE; if (chipid == BCM43362_CHIP_ID) return TRUE; if (chipid == BCM4314_CHIP_ID) return TRUE; if (chipid == BCM43242_CHIP_ID) return TRUE; if (chipid == BCM43340_CHIP_ID) return TRUE; if (chipid == BCM43341_CHIP_ID) return TRUE; if (chipid == BCM43143_CHIP_ID) return TRUE; if (chipid == BCM43342_CHIP_ID) return TRUE; if (chipid == BCM4334_CHIP_ID) return TRUE; if (chipid == BCM43239_CHIP_ID) return TRUE; if (chipid == BCM4324_CHIP_ID) return TRUE; if (chipid == BCM4335_CHIP_ID) return TRUE; if (chipid == BCM4339_CHIP_ID) return TRUE; if (chipid == BCM43349_CHIP_ID) return TRUE; if (chipid == BCM4345_CHIP_ID) return TRUE; if (chipid == BCM4350_CHIP_ID) return TRUE; if (chipid == BCM4354_CHIP_ID) return TRUE; if (chipid == BCM4356_CHIP_ID) return TRUE; if (chipid == BCM4358_CHIP_ID) return TRUE; if (chipid == BCM4371_CHIP_ID) return TRUE; if (chipid == BCM43430_CHIP_ID) return TRUE; if (BCM4349_CHIP(chipid)) return TRUE; return FALSE; } 20、 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ll 总用量 40 drwxr-xr-x 7 rootroot rootroot 4096 6月 26 12:02 ./ drwx------ 6 rootroot rootroot 4096 6月 26 14:16 ../ drwxr-xr-x 10 rootroot rootroot 4096 9月 4 2014 brandy/ -rw-rw-r-- 1 rootroot rootroot 116 6月 26 12:02 .buildconfig drwxr-xr-x 15 rootroot rootroot 4096 9月 4 2014 buildroot/ -r-xr-xr-x 1 rootroot rootroot 55 9月 4 2014 build.sh* drwxr-xr-x 28 rootroot rootroot 4096 6月 26 14:30 linux-3.4/ drwxrwxr-x 3 rootroot rootroot 4096 6月 26 12:02 out/ -r--r--r-- 1 rootroot rootroot 232 9月 4 2014 README drwxr-xr-x 7 rootroot rootroot 4096 6月 7 19:33 tools/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. evb 1. maple 2. redwood 3. y2 4. y3 Choice: 4 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh INFO: ---------------------------------------- INFO: build lichee ... INFO: chip: sun8iw5p1 INFO: platform: android INFO: kernel: linux-3.4 INFO: board: y3 INFO: output: out/sun8iw5p1/android/y3 INFO: ---------------------------------------- INFO: build buildroot ... external toolchain has been installed INFO: build buildroot OK. INFO: build kernel ... INFO: prepare toolchain ... Building kernel CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: “include/generated/mach-types.h”是最新的。 CALL scripts/checksyscalls.sh CHK include/generated/compile.h CC arch/arm/mach-sunxi/pm/standby/common.o CC arch/arm/mach-sunxi/pm/standby/standby_clock.o CC arch/arm/mach-sunxi/pm/standby/standby_ir.o CC arch/arm/mach-sunxi/pm/standby/standby_key.o CC arch/arm/mach-sunxi/pm/standby/standby_power.o CC arch/arm/mach-sunxi/pm/standby/standby_twi.o CC arch/arm/mach-sunxi/pm/standby/standby_usb.o AS arch/arm/mach-sunxi/pm/standby/standby_delay.o CC arch/arm/mach-sunxi/pm/standby/./arisc/standby_arisc.o CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_hwmsgbox.o CHK kernel/config_data.h CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_message_manager.o CC arch/arm/mach-sunxi/pm/standby/./../pm_debug.o CC arch/arm/mach-sunxi/pm/standby/./../mem_timing.o CC arch/arm/mach-sunxi/pm/standby/./../mem_mmu_pc.o AS arch/arm/mach-sunxi/pm/standby/./../mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/standby/./../mem_serial.o CC arch/arm/mach-sunxi/pm/standby/./../mem_printk.o AS arch/arm/mach-sunxi/pm/standby/./../mem_divlib.o CC arch/arm/mach-sunxi/pm/standby/./../mem_divlibc.o CC arch/arm/mach-sunxi/pm/standby/./../mem_int.o CC arch/arm/mach-sunxi/pm/standby/./../mem_tmr.o CC arch/arm/mach-sunxi/pm/standby/./../mem_tmstmp.o CC arch/arm/mach-sunxi/pm/standby/./../mem_clk.o CC arch/arm/mach-sunxi/pm/standby/./../mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/standby.o rm -rf *.o arch/arm/mach-sunxi/pm/standby/../*.o CC arch/arm/mach-sunxi/pm/standby/super/common.o CC arch/arm/mach-sunxi/pm/standby/super/super_twi.o CC [M] drivers/net/wireless/bcmdhd/dhd_sdio.o AS arch/arm/mach-sunxi/pm/standby/super/super_delay.o CC arch/arm/mach-sunxi/pm/standby/super/super_clock.o CC arch/arm/mach-sunxi/pm/standby/super/super_power.o CC arch/arm/mach-sunxi/pm/standby/super/super_cpus.o AS arch/arm/mach-sunxi/pm/standby/super/resume/resume1.o CC arch/arm/mach-sunxi/pm/standby/super/resume/resume_head.o CC arch/arm/mach-sunxi/pm/standby/super/resume/resume1_c_part.o CC arch/arm/mach-sunxi/pm/standby/../pm_debug.o CC arch/arm/mach-sunxi/pm/standby/../mem_timing.o CC arch/arm/mach-sunxi/pm/standby/../mem_mmu_pc.o AS arch/arm/mach-sunxi/pm/standby/../mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/standby/../mem_cpu.o CC arch/arm/mach-sunxi/pm/standby/../mem_serial.o CC arch/arm/mach-sunxi/pm/standby/../mem_printk.o CC [M] drivers/net/wireless/bcmdhd/dhd_cdc.o CC [M] drivers/net/wireless/bcmdhd/bcmsdh_linux.o CC [M] drivers/net/wireless/bcmdhd/dhd_common.o AS arch/arm/mach-sunxi/pm/standby/../mem_divlib.o CC arch/arm/mach-sunxi/pm/standby/../mem_divlibc.o drivers/net/wireless/bcmdhd/dhd_sdio.c: In function ‘dhdsdio_chipmatch’: drivers/net/wireless/bcmdhd/dhd_sdio.c:6936:16: error: ‘BCM43430_CHIP_ID’ undeclared (first use in this function) drivers/net/wireless/bcmdhd/dhd_sdio.c:6936:16: note: each undeclared identifier is reported only once for each function it appears in CC arch/arm/mach-sunxi/pm/standby/../mem_int.o make[4]: *** [drivers/net/wireless/bcmdhd/dhd_sdio.o] 错误 1 make[4]: *** 正在等待未完成的任务.... CC arch/arm/mach-sunxi/pm/standby/../mem_tmr.o CC arch/arm/mach-sunxi/pm/standby/../mem_tmstmp.o CC arch/arm/mach-sunxi/pm/standby/../mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/../mem_clk.o Source file is open Destination file is created. Source file is open Destination file is open. temp value is 400. 0 soure_file size is 9496. destination_file size is 0x2800. check sum generated is 0x68D92007. Everything is ok. rm -rf *.o arch/arm/mach-sunxi/pm/standby/../*.o CC arch/arm/mach-sunxi/pm/mem_mapping.o CC arch/arm/mach-sunxi/pm/mem_divlibc.o CC arch/arm/mach-sunxi/pm/mem_cpu.o AS arch/arm/mach-sunxi/pm/mem_cpu_asm.o AS arch/arm/mach-sunxi/pm/mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/mem_mmu_pc.o CC arch/arm/mach-sunxi/pm/mem_int.o CC arch/arm/mach-sunxi/pm/mem_clk.o CC arch/arm/mach-sunxi/pm/mem_tmr.o CC arch/arm/mach-sunxi/pm/mem_tmstmp.o CC arch/arm/mach-sunxi/pm/mem_twi.o CC arch/arm/mach-sunxi/pm/mem_gpio.o CC arch/arm/mach-sunxi/pm/mem_sram.o CC arch/arm/mach-sunxi/pm/mem_ccu.o CC arch/arm/mach-sunxi/pm/mem_cci400.o CC arch/arm/mach-sunxi/pm/mem_gtbus.o CC arch/arm/mach-sunxi/pm/pm_debug.o CC arch/arm/mach-sunxi/pm/mem_timing.o CC arch/arm/mach-sunxi/pm/mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/pm.o CC arch/arm/mach-sunxi/pm/extended_standby.o CC arch/arm/mach-sunxi/pm/standby/super/super_power.o CC arch/arm/mach-sunxi/pm/standby/super/super_twi.o CC arch/arm/mach-sunxi/pm/standby/super/super_clock.o AS arch/arm/mach-sunxi/pm/standby.o AS arch/arm/mach-sunxi/pm/mem.o LD arch/arm/mach-sunxi/pm/pm_tmp.o LD arch/arm/mach-sunxi/pm/built-in.o LD arch/arm/mach-sunxi/built-in.o make[3]: *** [drivers/net/wireless/bcmdhd] 错误 2 make[2]: *** [drivers/net/wireless] 错误 2 make[1]: *** [drivers/net] 错误 2 make: *** [drivers] 错误 2 ERROR: build kernel Failed rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ 21、（dhdsdio_probe_attach: unsupported chip: 0xa9a6） R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\include\bcmdevs.h #define BCM4350_CHIP_ID 0x4350 #define BCM43430_CHIP_ID 43430 /* 43430 chipcommon chipid 0xa9a6 */ #define BCM4342_CHIP_ID 4342 可以编译通过了。 （查看属性：） shell@astar-y3:/ $ shell@astar-y3:/ $ cd /system/vendor/modules/ shell@astar-y3:/system/vendor/modules $ ll bcm* -rw-r--r-- root root 26020 2017-06-26 12:46 bcm43438a0.hcd -rw-r--r-- root root 748856 2017-06-26 12:46 bcmdhd.ko shell@astar-y3:/system/vendor/modules $ Microsoft Windows [版本 6.1.7600] 版权所有 (c) 2009 Microsoft Corporation。保留所有权利。 C:\Users\Administrator>cd R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\n et\wireless\bcmdhd C:\Users\Administrator>r: R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd>adb remount * daemon not running. starting it now on port 5037 * * daemon started successfully * remount succeeded R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd> R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd>adb push bcmdhd.ko /system/vendor/modules/ 1677 KB/s (748864 bytes in 0.436s) R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd> 继续查看属性： shell@astar-y3:/system/vendor/modules $ ll bcm* -rw-r--r-- root root 26020 2017-06-26 12:46 bcm43438a0.hcd -rw-rw-rw- root root 748864 2017-06-26 14:34 bcmdhd.ko shell@astar-y3:/system/vendor/modules $ shell@astar-y3:/system/vendor/modules $ shell@astar-y3:/system/vendor/modules $ chmod 644 bcmdhd.ko Unable to chmod bcmdhd.ko: Operation not permitted 10|shell@astar-y3:/system/vendor/modules $ （必须在su下才能够修改属性：） shell@astar-y3:/system/vendor/modules $ su shell@astar-y3:/system/vendor/modules # chmod 644 bcmdhd.ko shell@astar-y3:/system/vendor/modules # shell@astar-y3:/system/vendor/modules # sync shell@astar-y3:/system/vendor/modules # reboot 22、 [ 0.658241] [wifi]: select wifi: ap6210 !! [ 0.658587] [ap6xxx]: module power name axp22_dldo1 [ 0.658601] [ap6xxx]: module power ext1 name axp22_dldo2 [ 0.658613] [ap6xxx]: module power ext2 name axp22_aldo1 [ 0.658721] [ap6xxx]: get ap6xxx wifi_power_switch failed [ 0.658731] [ap6xxx]: ap6xxx module power set by axp. [ 0.658930] [ap6xxx]: first time [ 0.659285] [ap6xxx]: regulator on. [ 0.661306] [wifi_pm]: wifi gpio init is OK !! （重启之后，WIFI模块要想办法配置为ap6212，现阶段借用的是AP6210！） [ 8.517657] gpio ap6xxx_wl_regon set val 1, act val 1 [ 8.623325] [ap6xxx]: sdio wifi power state: on [ 8.628389] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.628566] =========== WLAN placed in POWER ON ======== [ 8.645459] [mmc]: sdc1 card_power_on start... [ 8.650397] [mmc]: sdc1 power_supply is null [ 8.655129] [mmc]: sdc1 card_power_on ok [ 8.680031] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.690267] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.772360] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 8.781316] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 8.789448] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.799684] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.861971] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.872189] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.933887] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !! [ 8.941921] *******************Try sdio******************* [ 8.948329] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.958545] [mmc]: mclk 0xf1c2008c 0x8002000e [ 9.027690] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 9.035325] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 9.043192] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 9.052046] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 9.145358] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 9.155486] [mmc]: mclk 0xf1c2008c 0x8002000e [ 9.215398] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 9.225785] [mmc]: mclk 0xf1c2008c 0x8100000b [ 9.285721] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 9.296049] [mmc]: mclk 0xf1c2008c 0x8140030b [ 9.357922] mmc1: new high speed SDIO card at address 0001 [ 9.364523] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 9.364563] *******************sdio init ok******************* [ 9.377203] bcm_wlan_get_oob_irq enter. [ 9.381534] gpio [359] map to virq [7] ok [ 9.388816] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 9.396740] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 9.404660] dhdsdio_probe: Disable prop_txstatus [ 9.410903] wl_create_event_handler(): thread:wl_event_handler:5d started [ 9.410914] tsk Enter, tsk = 0xddca13d8 [ 9.423788] p2p0: P2P Interface Registered [ 9.428464] dhd_attach(): thread:dhd_watchdog_thread:5e started [ 9.435144] dhd_attach(): thread:dhd_dpc:5f started [ 9.440653] dhd_attach(): thread:dhd_sysioc:60 started [ 9.447276] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 [ 9.456558] [ 9.456561] Dongle Host Driver, version 1.88.45.3 (r420671) [ 9.456565] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 9.472427] gpio ap6xxx_wl_regon set val 0, act val 0 [ 9.578054] [ap6xxx]: sdio wifi power state: off [ 9.583186] =========== WLAN placed in RESET ======== （WIFI启动加载正常） shell@astar-y3:/ $ lsmod gt82x 9849 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) cdc_ether 5099 0 - Live 0x00000000 rtl8150 9023 0 - Live 0x00000000 mcs7830 6292 0 - Live 0x00000000 qf9700 7805 0 - Live 0x00000000 asix 17150 0 - Live 0x00000000 usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13604 0 - Live 0x00000000 vfe_v4l2 445364 0 - Live 0x00000000 gc2035 12696 0 - Live 0x00000000 gc0308 10702 0 - Live 0x00000000 vfe_subdev 4523 3 vfe_v4l2,gc2035,gc0308, Live 0x00000000 vfe_os 4099 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21594 2 gc2035,gc0308, Live 0x00000000 videobuf_dma_contig 5535 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcmdhd 556965 0 - Live 0x00000000 leds_sunxi 1351 0 - Live 0x00000000 mali 209914 20 - Live 0x00000000 (O) lcd 38180 0 - Live 0x00000000 disp 993096 8 mali,lcd, Live 0x00000000 nand 280622 0 - Live 0x00000000 (O) shell@astar-y3:/ $ （bcmdhd.ko这个驱动模块加载正常：） （BT没有打开，但是不停地打印BT超时出错，不知道是何解？） shell@astar-y3:/ $ [ 511.880344] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 511.887326] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle 23、 由于此时WIFI出于记住上一次的状态的状态（打不开），所以需要重新刷镜像IMG，然后替换：bcmdhd.ko shell@astar-y3:/ $ shell@astar-y3:/ $ lsmod gt82x 9849 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) cdc_ether 5099 0 - Live 0x00000000 rtl8150 9023 0 - Live 0x00000000 mcs7830 6292 0 - Live 0x00000000 qf9700 7805 0 - Live 0x00000000 asix 17150 0 - Live 0x00000000 usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13604 0 - Live 0x00000000 vfe_v4l2 445364 0 - Live 0x00000000 gc2035 12696 0 - Live 0x00000000 gc0308 10702 0 - Live 0x00000000 vfe_subdev 4523 3 vfe_v4l2,gc2035,gc0308, Live 0x00000000 vfe_os 4099 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21594 2 gc2035,gc0308, Live 0x00000000 videobuf_dma_contig 5535 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcmdhd 556965 0 - Live 0x00000000 leds_sunxi 1351 0 - Live 0x00000000 mali 209914 15 - Live 0x00000000 (O) lcd 38180 0 - Live 0x00000000 disp 993096 8 mali,lcd, Live 0x00000000 nand 280622 0 - Live 0x00000000 (O) shell@astar-y3:/ $ shell@astar-y3:/ $ shell@astar-y3:/ $ [ 110.012176] init: computing context for service '/system/bin/wpa_supplicant' [ 110.025400] init: starting 'p2p_supplicant' [ 110.039886] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 110.119751] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 110.140144] [ 110.140153] Dongle Host Driver, version 1.88.45.3 (r420671) [ 110.140158] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 110.173523] wl_android_wifi_on in 1 [ 110.177409] wl_android_wifi_on in 2: g_wifi_on=0 [ 110.200103] gpio ap6xxx_wl_regon set val 1, act val 1 [ 110.280025] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 110.286694] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle [ 110.355684] [ap6xxx]: sdio wifi power state: on [ 110.360930] =========== WLAN going back to live ======== [ 110.366925] sdio_reset_comm(): [ 110.370346] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.380773] [mmc]: mclk 0xf1c2008c 0x8140030b [ 110.443029] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.454758] [mmc]: mclk 0xf1c2008c 0x8140030b [ 110.516097] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.530958] [mmc]: mclk 0xf1c2008c 0x80430309 [ 110.592013] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.603518] [mmc]: mclk 0xf1c2008c 0x80030009 [ 110.681418] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 110.690726] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 110.700331] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 110.712218] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 110.894520] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.904933] [mmc]: mclk 0xf1c2008c 0x80030009 [ 110.964907] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.975514] [mmc]: mclk 0xf1c2008c 0x8100000b [ 111.035618] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 111.046398] [mmc]: mclk 0xf1c2008c 0x8140030b [ 111.108547] [ 111.108566] [ 111.108579] dhd_bus_devreset: == WLAN ON == [ 111.116882] dhd_bus_devreset called when dongle is not in reset [ 111.123683] Will call dhd_bus_start instead [ 111.128637] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 111.140963] dhd_conf_download_config: Ignore config file /system/vendor/modules/config.txt [ 111.151802] Final fw_path=/system/vendor/modules/fw_bcm43438a0.bin [ 111.158689] Final nv_path=/system/vendor/modules/nvram_ap6210.txt [ 111.165542] Final conf_path=/system/vendor/modules/config.txt [ 111.257577] dhdsdio_download_nvram: Open nvram file failed /system/vendor/modules/nvram_ap6210.txt [ 111.268309] _dhdsdio_download_firmware: dongle nvram file download failed [ 111.276022] dhd_bus_start: dhdsdio_probe_download failed. firmware = /system/vendor/modules/fw_bcm43438a0.bin nvram = /system/vendor/modules/nvram_ap6210.txt config = /system/vendor/modules/config.txt [ 111.295979] dhd_bus_devreset: dhd_bus_start fail with -1 [ 111.304154] dhd_dev_reset: dhd_bus_devreset: -1 [ 111.309190] dhd_prot_ioctl : bus is down. we have nothing to do [ 111.330328] dhd_bus_devreset: WLAN OFF DONE [ 111.335225] gpio ap6xxx_wl_regon set val 0, act val 0 [ 111.472499] [ap6xxx]: sdio wifi power state: off [ 111.477661] =========== WLAN placed in RESET ======== [ 111.483304] wl_android_wifi_on: Failed [ 111.487473] wl_android_wifi_off in 1 [ 111.491478] wl_android_wifi_off in 2: g_wifi_on=0 [ 111.496711] wl_android_wifi_off out [ 111.509335] init: waitpid returned pid 1211, status = 0000ff00 [ 111.516072] init: process 'p2p_supplicant', pid 1211 exited shell@astar-y3:/ $ shell@astar-y3:/ $ 24、定位问题：dhd_bus_devreset: dhd_bus_start fail with -1 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "dhd_bus_start fail with" . -R ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "dhd_bus_start fail with" . -R ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ int dhd_bus_devreset(dhd_pub_t *dhdp, uint8 flag) { …… dhd_conf_set_fw_name_by_chip(dhdp, fw_path, firmware_path); if ((bcmerror = dhd_bus_start(dhdp)) != 0) DHD_ERROR(("%s: dhd_bus_start fail with %d\n", __FUNCTION__, bcmerror)); } } return bcmerror; } rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep dhd_bus_start . -R ./dhd_sdio.c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio.c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio.c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd_sdio - 副本.c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio - 副本.c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio - 副本.c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio - 副本.c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio - 副本.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd_sdio - 副本 (2).c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio - 副本 (2).c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio - 副本 (2).c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio - 副本 (2).c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio - 副本 (2).c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd.h:extern int dhd_bus_start(dhd_pub_t *dhdp); ./wl_android.c:/* Initialize g_wifi_on to 1 so dhd_bus_start will be called for the first ./dhd_linux.c: if ((ret = dhd_bus_start(&dhd->pub)) != 0) { ./dhd_linux.c: /* dhd_prot_init has been called in dhd_bus_start or wl_android_wifi_on */ ./dhd_linux.c:dhd_bus_start(dhd_pub_t *dhdp) rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ 定位到这里： int dhd_bus_start(dhd_pub_t *dhdp) { …… /* try to download image and nvram to the dongle */ if ((dhd->pub.busstate == DHD_BUS_DOWN) && (fw_path[0] != '\0') && (nv_path[0] != '\0')) { #ifdef SHOW_NVRAM_TYPE { /* Show nvram type in the kernel log */ int i; for (i = 0; nv_path[i] != '\0'; ++i) { if (nv_path[i] == '.') { ++i; break; } } DHD_ERROR(("%s: nvram_type = [%s]\n", __FUNCTION__, &nv_path[i])); } #endif /* SHOW_NVRAM_TYPE */ /* wake lock moved to dhdsdio_download_firmware */ if (!(dhd_bus_download_firmware(dhd->pub.bus, dhd->pub.osh, fw_path, nv_path, conf_path))) { DHD_ERROR(("%s: dhdsdio_probe_download failed. firmware = %s nvram = %s config = %s\n", __FUNCTION__, fw_path, nv_path, conf_path)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ // 2017/6/23 18:40 wenyuanbo download ap6212 fail not return error!!!! //return -1; } } …… return 0; } 由于ap6212没有config.txt文件，下载肯定会出错，比对全志R16平台去AP6212的处理，关闭这里： //return -1; 25、 shell@astar-y3:/ $ shell@astar-y3:/ $ [ 110.012176] init: computing context for service '/system/bin/wpa_supplicant' [ 110.025400] init: starting 'p2p_supplicant' [ 110.039886] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 110.119751] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 110.140144] [ 110.140153] Dongle Host Driver, version 1.88.45.3 (r420671) [ 110.140158] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 110.173523] wl_android_wifi_on in 1 [ 110.177409] wl_android_wifi_on in 2: g_wifi_on=0 [ 110.200103] gpio ap6xxx_wl_regon set val 1, act val 1 [ 110.280025] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expire
python 报错信息汇总
记录点滴
08-05 357
问题1：NameError: name 'sys' is not defined 解决方法： 在代码上加入 import sys 问题2： Traceback (most recent call last):  File "&lt;stdin&gt;", line 1, in &lt;module&gt;TypeError: a float is required 时间戳转换过程中报错...
https 出现host name not match 问题
热门推荐
sonycong的专栏
05-26 3万+
'www.xxx.com' does not match the certificate subject provided by the peer 出现这个问题的原因是你访问的域名和你访问服务器的证书的机构(域名)不一致导致的，比如，你的证书是为域名 sss.com注册的，而你访问的时候的域名是xxx.com,这个时候就会报这种错误，解决办法是重写httpclient的HostnameVerif
notebook报错NameError: name ‘sc‘ is not defined解决
qq_46061082的博客
05-31 5663
关于在notebook中报错的一个问题的解决 报错如下： NameError Traceback (most recent call last) <ipython-input-1-d406e6b19b59> in <module> ----> 1 sc.stop() 2 import random 3 sc = SparkContext(appName="Pi") 4 num_s
运行jupyter发现显示NameError: name ‘sc‘ is not defined
m0_67075422的博客
05-11 1279
如题，不明白为啥sc未定义，之前是可以的，我把原来的工程文件删掉了，又重装了anaconda3，Scala，spark，是不是我有啥重要的东西删了哇。求问大佬怎么解决，我看不懂这是缺了啥。这个notebook server之前也没有这些东西。
linux全志R16的linux系统编译的资料_20170502_1655.7z
05-02
全志R16平台编译linux系统V1.0.txt 2017/4/11 13:36 （编译请使用编译android的lichee的选项编译生成的.config文件，不然直接编译会报错！！！！） rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ tar zxvf lichee_parrotv1.1_20161202.tar.gz rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ cd lichee/ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux 3. tina Choice: 2 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. bell-one 1. evb 2. evb-20 3. evb-30 4. evb-rtl8723bs 5. sc3813r Choice: 3 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh 错误1： KCONFIG_AUTOCONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/tristate.config BUILDROOT_CONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf --silentoldconfig Config.in # # make dependencies written to .auto.deps # ATTENTION buildroot devels! # See top of this file before playing with this auto-preprequisites! # make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot' You must install 'makeinfo' on your build machine makeinfo is usually part of the texinfo package in your distribution make: *** [dependencies] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ d/buildroot-config/conf.o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/zconf.tab.o -o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buil
ap6212a0_a33_sc3817r_服务器验证通过_bt已经通了_wifi需要修改配置_需要再次验证_20170626_1549.7z
06-26
<string-array translatable="false" name="config_tether_bluetooth_regexs"> <item>"bt-pan" 3、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\astar_y3.mk # ap6181/6210/6330 sdio ...
Ipython Exception name ‘sys‘ is not defined报错问题
weixin_42970378的博客
01-08 1571
问题概述 使用Ipython时，通过Tab键索引包名之类的提示报错，错误详情： Python 3.7.9 (tags/v3.7.9:13c94747c7, Aug 17 2020, 18:58:18) [MSC v.1900 64 bit (AMD64)] Type 'copyright', 'credits' or 'license' for more information IPython 7.19.0 -- An enhanced Interactive Python. Type '?' for he
spark 2.2:jupyter notebook NameError: name 'sc' is not defined
Learning from the mistakes
10-03 1万+
我在运行spark机器学习的python例子的时候会出现上面的错误 name 'sc' is not defined 这是因为另一个程序占用了python kernel的缘故，你重新开了一个程序运行就会报错，这个时候我们需要把原来的程序关了，然后再重新运行现在的就行了 参考文献 [1].https://stackoverflow.com/questions/38515369/ju
Spark集群启动python shell错误： Could not resolve hostname localhost: Temporary failure
weixin_34174105的博客
08-01 325
Hadoop集群部署参考：点击查看 Spark集群部署参考：点击查看 最近在自己搭建的平台上测试spark-python脚本，发现一个错误如下： <span style="font-size:14px;">[master@slave1 spark]$ bin/pyspark Python 2.6.6 (r266:84292, Jul 2...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值