make smdk2410_config 详解

#!/bin/sh -e

# Script to create header files and links to configure
# U-Boot for a specific board.
#
# Parameters:  Target  Architecture  CPU  Board [VENDOR] [SOC]
#
# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
#

APPEND=no	# Default: Create new config file
BOARD_NAME=""	# Name to print in make output

while [ $# -gt 0 ] ; do
	case "$1" in
	--) shift ; break ;;
	-a) shift ; APPEND=yes ;;
	-n) shift ; BOARD_NAME="${1%%_config}" ; shift ;;
	*)  break ;;
	esac
done

[ "${BOARD_NAME}" ] || BOARD_NAME="$1"

[ $# -lt 4 ] && exit 1
[ $# -gt 6 ] && exit 1

echo "Configuring for ${BOARD_NAME} board..."

#
# Create link to architecture specific headers
#
if [ "$SRCTREE" != "$OBJTREE" ] ; then
	mkdir -p ${OBJTREE}/include
	mkdir -p ${OBJTREE}/include2
	cd ${OBJTREE}/include2
	rm -f asm
	ln -s ${SRCTREE}/include/asm-$2 asm
	LNPREFIX="../../include2/asm/"
	cd ../include
	rm -rf asm-$2
	rm -f asm
	mkdir asm-$2
	ln -s asm-$2 asm
else
	cd ./include
	rm -f asm
	ln -s asm-$2 asm
fi

rm -f asm-$2/arch

if [ -z "$6" -o "$6" = "NULL" ] ; then
	ln -s ${LNPREFIX}arch-$3 asm-$2/arch
else
	ln -s ${LNPREFIX}arch-$6 asm-$2/arch
fi

if [ "$2" = "arm" ] ; then
	rm -f asm-$2/proc
	ln -s ${LNPREFIX}proc-armv asm-$2/proc
fi

#
# Create include file for Make
#
echo "ARCH   = $2" >  config.mk
echo "CPU    = $3" >> config.mk
echo "BOARD  = $4" >> config.mk

[ "$5" ] && [ "$5" != "NULL" ] && echo "VENDOR = $5" >> config.mk

[ "$6" ] && [ "$6" != "NULL" ] && echo "SOC    = $6" >> config.mk

#
# Create board specific header file
#
if [ "$APPEND" = "yes" ]	# Append to existing config file
then
	echo >> config.h
else
	> config.h		# Create new config file
fi
echo "/* Automatically generated - do not edit */" >>config.h
echo "#include <configs/$1.h>" >>config.h

exit 0

 

#在编译UBOOT之前，我们先要执行：
#make smdk2410_config
#从本Makefile的下文可以判断出smdk2410_config为Makefile的一个目标。
#smdk2410_config: unconfig的意思是为smdk2410开发板建立一个编译项。
#显然，执行#make smdk2410_config时，先执行unconfig目标（不指定输出目标时，obj，src变量均为空），unconfig下面的命令主要任务是清理上
#一次执行make *_config时生成的头文件和makefile的包含文件。
#主要是include/config.h和include/config.mk
#然后执行命令： @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
#arm 表示CPU的构架是基于ARM体系的
#arm920t 表示CPU的类型是arm920t
#smdk2410 表示开发板的型号
#NULL 表示开发商或者经销商的名称，这里为空
#s3c24x0 表示基于S3C2410的片上系统
#MKCONFIG指向UBOOT顶层目录下的mkconfig脚本配置文件，后面五个字符串是传入的参数（好像$(@:_config=)也是一个参数）。

# Parameters:           Target      Architecture  CPU             Board            [VENDOR]      [SOC]

./mkconfig  smdk2410  arm  arm920t  smdk2410  NULL  s3c24x0

     $0                           $1                  $2            $3                   $4                  $5                $6

while [ $# -gt 0 ] ; do
	case "$1" in
	--) shift ; break ;;
	-a) shift ; APPEND=yes ;;
	-n) shift ; BOARD_NAME="${1%%_config}" ; shift ;;
	*)  break ;;
	esac
done

---------$# 大于 0 执行do   $1=smdk2410  执行*）brake；

while用法参考https://blog.csdn.net/liuhuiyan_2014/article/details/45054081

while [ $# -gt 0 ]  
# $#代表参数总数  
do  
    echo $1 #输出第一个参数  
    shift 1 #将参数个数减1，并且都向1移动一位，也可以设置2，一次移动2位，相当与i--,i是参数总个数。  
done  

#-gt大于  
#-lt小于  
#-ge大于等于  
#-le小于等于  
#-eq等于  
#-ne不等于 

[ "${BOARD_NAME}" ] || BOARD_NAME="$1"

[ $# -lt 4 ] && exit 1
[ $# -gt 6 ] && exit 1

echo "Configuring for ${BOARD_NAME} board..."

[ ] 判断

#
# Create link to architecture specific headers
#
if [ "$SRCTREE" != "$OBJTREE" ] ; then
	mkdir -p ${OBJTREE}/include
	mkdir -p ${OBJTREE}/include2
	cd ${OBJTREE}/include2
	rm -f asm
	ln -s ${SRCTREE}/include/asm-$2 asm
	LNPREFIX="../../include2/asm/"
	cd ../include
	rm -rf asm-$2
	rm -f asm
	mkdir asm-$2
	ln -s asm-$2 asm
else
	cd ./include
	rm -f asm
	ln -s asm-$2 asm
fi

rm -f asm-$2/arch

"$SRCTREE" = "$OBJTREE"  因此执行else

ln -s asm-$2 asm    //ln -s  include/asm-arm   asm

rm -f asm-$2/arch    //删除include/asm-arm/arch

#
# Create include file for Make
#
echo "ARCH   = $2" >  config.mk
echo "CPU    = $3" >> config.mk
echo "BOARD  = $4" >> config.mk

[ "$5" ] && [ "$5" != "NULL" ] && echo "VENDOR = $5" >> config.mk

[ "$6" ] && [ "$6" != "NULL" ] && echo "SOC    = $6" >> config.mk

shell:   '>'  为创建    '>>' 为追加

‘>’会将config.mk文本中的内容清空，并将字符串存入

而‘>>’会将 字符串追加保存到config.mk的末尾

config.mk内容为：

ARCH   = arm

CPU    = arm920t 

BOARD  = smdk2410 

VENDOR = NULL 

SOC    = s3c24x0

#
# Create board specific header file
#
if [ "$APPEND" = "yes" ]	# Append to existing config file
then
	echo >> config.h
else
	> config.h		# Create new config file
fi
echo "/* Automatically generated - do not edit */" >>config.h
echo "#include <configs/$1.h>" >>config.h

exit 0

将

echo "/* Automatically generated - do not edit */" >>config.h
echo "#include <configs/$1.h>" >>config.h

写入config.h