串口通信设置

串口通信，一般是指RS232、RS422之间的通信。matlab中有专门的serial函数来创建串口对象。设串口ID号为COM1，则创建方法为： >>scom = serial('com1'); 复制代码 创建完串口对象后，一般需要设置串口对象的属性，否则，串口不会相互通信。 >> get(scom)     ByteOrder = littleEndian     BytesAvailable = 0     BytesAvailableFcn =      BytesAvailableFcnCount = 48     BytesAvailableFcnMode = terminator     BytesToOutput = 0     ErrorFcn =      InputBufferSize = 512     Name = Serial-COM1     ObjectVisibility = on     OutputBufferSize = 512     OutputEmptyFcn =      RecordDetail = compact     RecordMode = overwrite     RecordName = record.txt     RecordStatus = off     Status = closed     Tag =      Timeout = 10     TimerFcn =      TimerPeriod = 1     TransferStatus = idle     Type = serial     UserData = []     ValuesReceived = 0     ValuesSent = 0     SERIAL specific properties:     BaudRate = 9600     BreakInterruptFcn =      DataBits = 8     DataTerminalReady = on     FlowControl = none     Parity = none     PinStatus = [1x1 struct]     PinStatusFcn =      Port = COM1     ReadAsyncMode = continuous     RequestToSend = off     StopBits = 1     Terminator = LF 复制代码