GPON(Gigabit Passive Optical Network,千兆比特无源光网络)接入可以在宽带和窄带业务环境下提供灵活接入能力,可以提供超高带宽接入,并且支持多种速率模式,采用单根光纤为用户提供语音、数据、视频等多种业务服务。
图1 GPON业务组网图
1、配置GPON ONU类型模板
表
1
GPON ONU
类型配置数据
配置项 | 数据 |
---|---|
ONU类型名称 | ZTEG-F620 |
ONU描述 | 4FE,2POTS |
最大T-CONT数 | 7 |
最大GEM Port数 | 32 |
每个槽位最大交换单元数 | 1 |
每个交换单元最大Flow数 | 32 |
用户端口数 |
ETH:4
POTS:2
|
步骤
>>
1. | 在PON配置模式下,创建ONU类型模板。
ZXAN(config)#pon ZXAN(config-pon)#onu-type ZTEG-F620 gpon description 4FE,2POTS max-tcont 7 max-gemport 32 max-switch-perslot 1 max-flow-perswitch 32 ![]()
在
ZXA10 C320
中
,
GPON
和
EPON
的
ONU
类型名称不能相同。
|
2. | 配置该ONU类型的用户端口。
ZXAN(config-pon)#onu-type-if ZTEG-F620 eth_0/1-4 ZXAN(config-pon)#onu-type-if ZTEG-F620 pots_0/1-2 |
3. | (可选)查看配置的ONU模板。
ZXAN(config-pon)#show onu-type gpon ZTEG-F620 Onu type name : ZTEG-F620 Pon type : gpon Description : 4FE,2POTS Max tcont : 7 Max gemport : 32 Max switch per slot : 1 Max flow per switch : 32 Max iphost : 2 Service ability N:1 : support Service ability 1:M : support Service ability 1:P : support WiFi mgmt via non OMCI : disable Omci send mode : async Default multicast range: none |
2、认证GPON ONU
摘要
>>
对于初次上线的
GPON ONU,
在配置其业务之前
,
需要认证该
ONU
。
前提条件
>>
该
GPON ONU
的类型模板为缺省类型模板或已配置。
配置数据
>>
GPON ONU
认证的配置数据参见表2
。
表
2
GPON ONU
认证配置数据
配置项 | 数据 |
---|---|
ONU ID | 1 |
ONU类型 | ZTEG-F620 |
SN | ZTEG00000002 |
步骤
>>
1. | 查看未认证的ONU信息。
ZXAN(config)#show gpon onu uncfg gpon-olt_1/1/1 OnuIndex Sn State --------------------------------------------------------------------- gpon-onu_1/1/1:1 ZTEG00000002 unknown |
2. | 在OLT(Optical Line Terminal,光线路终端)接口模式下,认证ONU。
ZXAN(config)#interface gpon-olt_1/1/1 ZXAN(config-if)#onu 1 type ZTEG-F620 sn ZTEG00000002 [Successful] ZXAN(config-if)#exit |
3. | (可选)查看认证的ONU信息。
ZXAN(config)#show gpon onu state gpon-olt_1/1/1 OnuIndex Admin State Omcc State O7 State Phase State ---------------------------------------------------------------------------- gpon-onu_1/1/1:1 enable enable operation working
表
3
ONU
阶段状态参数说明
|