certtool 是一个用于处理X.509证书的工具，它是由GNU的libksba库提供的。在 Debian 10 上，您可以使用以下步骤来安装和使用 certtool：
安装
打开终端。
使用以下命令更新软件包列表：
sudo apt update
使用以下命令安装 libksba-dev（因为certtool在Debian的软件仓库中没有提供，所以需要安装开发包）：
sudo apt install libksba-dev
apt-get install gnutls-bin
使用
安装完成后，您可以使用 certtool 命令。以下是一些常用的选项和用法：
创建自签名证书：
certtool --generate-privkey --outfile mykey.pem --type RSA --bits 2048
这将生成一个2048位的RSA私钥，并将其保存为 mykey.pem。
创建自签名证书请求（CSR）：
certtool --generate-request --load-privkey mykey.pem --outfile myreq.csr --type PKCS10
这将使用先前生成的私钥创建一个PKCS10格式的证书请求，并将其保存为 myreq.csr。
从证书请求生成证书：
首先，您需要一个CA的公钥和私钥。假设您已经有了这些，并且它们分别保存在 cacert.pem 和 cakey.pem 中：
certtool --generate-certificate --load-request myreq.csr --outfile mycert.pem --load-ca-certificate cacert.pem --load-ca-privkey cakey.pem --set-common-name "My Certificate" --type PKCS10 --CAoptions no-ca-sign
这将使用您的CA公钥和私钥以及证书请求来创建一个PKCS10格式的证书，并将其保存为 mycert.pem。
查看PEM格式的证书：
certtool --certificate-info --infile mycert.pem
这将显示关于证书的信息。
验证证书链：
假设您有一个证书链，并且您想验证其有效性：
certtool --verify --infile chain.pem --CAfile cacert.pem --check-chain
这将验证证书链是否有效。如果证书链无效或缺少任何中间证书或根证书，该命令将显示错误消息。
更多选项和用法：
您可以使用 certtool --help 命令查看更多选项和用法。
下面提供下根据模板生成证书的方法：
client.cfg
# X.509 Certificate options
#
# DN options
# The organization of the subject.
organization = "Example"
# The organizational unit of the subject.
unit = "Example"
# The locality of the subject.
# locality =
# The state of the certificate owner.
#state = ""
# The country of the subject. Two letter code.
country = US
# The common name of the certificate owner.
cn = "Test Client"
# A user id of the certificate owner.
#uid = "clauper"
# Set domain components
#dc = "name"
#dc = "domain"
# If the supported DN OIDs are not adequate you can set
# any OID here.
# For example set the X.520 Title and the X.520 Pseudonym
# by using OID and string pairs.
#dn_oid = "2.5.4.12 Dr."
#dn_oid = "2.5.4.65 jackal"
# This is deprecated and should not be used in new
# certificates.
# pkcs9_email = "none@none.org"
# An alternative way to set the certificate's distinguished name directly
# is with the "dn" option. The attribute names allowed are:
# C (country), street, O (organization), OU (unit), title, CN (common name),
# L (locality), ST (state), placeOfBirth, gender, countryOfCitizenship,
# countryOfResidence, serialNumber, telephoneNumber, surName, initials,
# generationQualifier, givenName, pseudonym, dnQualifier, postalCode, name,
# businessCategory, DC, UID, jurisdictionOfIncorporationLocalityName,
# jurisdictionOfIncorporationStateOrProvinceName,
# jurisdictionOfIncorporationCountryName, XmppAddr, and numeric OIDs.
#dn = "cn = Nikos,st = New Something,C=GR,surName=Mavrogiannopoulos,2.5.4.9=Arkadias"
# The serial number of the certificate
# Comment the field for a time-based serial number.
# serial = 007
# In how many days, counting from today, this certificate will expire.
# Use -1 if there is no expiration date.
expiration_days = 3650
# Alternatively you may set concrete dates and time. The GNU date string
# formats are accepted. See:
# http://www.gnu.org/software/tar/manual/html_node/Date-input-formats.html
#activation_date = "2004-02-29 16:21:42"
#expiration_date = "2025-02-29 16:24:41"
# X.509 v3 extensions
# A dnsname in case of a WWW server.
#dns_name = "www.none.org"
#dns_name = "www.morethanone.org"
# An othername defined by an OID and a hex encoded string
#other_name = "1.3.6.1.5.2.2 302ca00d1b0b56414e5245494e2e4f5247a11b3019a006020400000002a10f300d1b047269636b1b0561646d696e"
#other_name_utf8 = "1.2.4.5.6 A UTF8 string"
#other_name_octet = "1.2.4.5.6 A string that will be encoded as ASN.1 octet string"
# Allows writing an XmppAddr Identifier
#xmpp_name = juliet@im.example.com
# Names used in PKINIT
#krb5_principal = user@REALM.COM
#krb5_principal = HTTP/user@REALM.COM
# A subject alternative name URI
#uri = "http://www.example.com"
# An IP address in case of a server.
#ip_address = "192.168.1.1"
# An email in case of a person
# email = "none@none.org"
# TLS feature (rfc7633) extension. That can is used to indicate mandatory TLS
# extension features to be provided by the server. In practice this is used
# to require the Status Request (extid: 5) extension from the server. That is,
# to require the server holding this certificate to provide a stapled OCSP response.
# You can have multiple lines for multiple TLS features.
# To ask for OCSP status request use:
#tls_feature = 5
# Challenge password used in certificate requests
challenge_password =
# Password when encrypting a private key
#password = secret
# An URL that has CRLs (certificate revocation lists)
# available. Needed in CA certificates.
#crl_dist_points = "http://www.getcrl.crl/getcrl/"
# Whether this is a CA certificate or not
#ca
# Subject Unique ID (in hex)
#subject_unique_id = 00153224
# Issuer Unique ID (in hex)
#issuer_unique_id = 00153225
#### Key usage
# The following key usage flags are used by CAs and end certificates
# Whether this certificate will be used to sign data (needed
# in TLS DHE ciphersuites). This is the digitalSignature flag
# in RFC5280 terminology.
#signing_key
# Whether this certificate will be used to encrypt data (needed
# in TLS RSA ciphersuites). Note that it is preferred to use different
# keys for encryption and signing. This is the keyEncipherment flag
# in RFC5280 terminology.
#encryption_key
# Whether this key will be used to sign other certificates. The
# keyCertSign flag in RFC5280 terminology.
#cert_signing_key
# Whether this key will be used to sign CRLs. The
# cRLSign flag in RFC5280 terminology.
#crl_signing_key
# The keyAgreement flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#key_agreement
# The dataEncipherment flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#data_encipherment
# The nonRepudiation flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#non_repudiation
#### Extended key usage (key purposes)
# The following extensions are used in an end certificate
# to clarify its purpose. Some CAs also use it to indicate
# the types of certificates they are purposed to sign.
# Whether this certificate will be used for a TLS client;
# this sets the id-kp-serverAuth (1.3.6.1.5.5.7.3.1) of
# extended key usage.
tls_www_client
# Whether this certificate will be used for a TLS server;
# This sets the id-kp-clientAuth (1.3.6.1.5.5.7.3.2) of
# extended key usage.
tls_www_server
# Whether this key will be used to sign code. This sets the
# id-kp-codeSigning (1.3.6.1.5.5.7.3.3) of extended key usage
# extension.
#code_signing_key
# Whether this key will be used to sign OCSP data. This sets the
# id-kp-OCSPSigning (1.3.6.1.5.5.7.3.9) of extended key usage extension.
#ocsp_signing_key
# Whether this key will be used for time stamping. This sets the
# id-kp-timeStamping (1.3.6.1.5.5.7.3.8) of extended key usage extension.
#time_stamping_key
# Whether this key will be used for email protection. This sets the
# id-kp-emailProtection (1.3.6.1.5.5.7.3.4) of extended key usage extension.
#email_protection_key
# Whether this key will be used for IPsec IKE operations (1.3.6.1.5.5.7.3.17).
#ipsec_ike_key
## adding custom key purpose OIDs
# for microsoft smart card logon
# key_purpose_oid = 1.3.6.1.4.1.311.20.2.2
# for email protection
# key_purpose_oid = 1.3.6.1.5.5.7.3.4
# for any purpose (must not be used in intermediate CA certificates)
# key_purpose_oid = 2.5.29.37.0
### end of key purpose OIDs
### Adding arbitrary extensions
# This requires to provide the extension OIDs, as well as the extension data in
# hex format. The following two options are available since GnuTLS 3.5.3.
#add_extension = "1.2.3.4 0x0AAB01ACFE"
# As above but encode the data as an octet string
#add_extension = "1.2.3.4 octet_string(0x0AAB01ACFE)"
# For portability critical extensions shouldn't be set to certificates.
#add_critical_extension = "5.6.7.8 0x1AAB01ACFE"
# When generating a certificate from a certificate
# request, then honor the extensions stored in the request
# and store them in the real certificate.
#honor_crq_extensions
# Alternatively only specific extensions can be copied.
#honor_crq_ext = 2.5.29.17
#honor_crq_ext = 2.5.29.15
# Path length contraint. Sets the maximum number of
# certificates that can be used to certify this certificate.
# (i.e. the certificate chain length)
#path_len = -1
#path_len = 2
# OCSP URI
# ocsp_uri = http://my.ocsp.server/ocsp
# CA issuers URI
# ca_issuers_uri = http://my.ca.issuer
# Certificate policies
#policy1 = 1.3.6.1.4.1.5484.1.10.99.1.0
#policy1_txt = "This is a long policy to summarize"
#policy1_url = http://www.example.com/a-policy-to-read
#policy2 = 1.3.6.1.4.1.5484.1.10.99.1.1
#policy2_txt = "This is a short policy"
#policy2_url = http://www.example.com/another-policy-to-read
# Name constraints
# DNS
#nc_permit_dns = example.com
#nc_exclude_dns = test.example.com
# EMAIL
#nc_permit_email = "nmav@ex.net"
# Exclude subdomains of example.com
#nc_exclude_email = .example.com
# Exclude all e-mail addresses of example.com
#nc_exclude_email = example.com
# IP
#nc_permit_ip = 192.168.0.0/16
#nc_exclude_ip = 192.168.5.0/24
#nc_permit_ip = fc0a:eef2:e7e7:a56e::/64
# Options for proxy certificates
#proxy_policy_language = 1.3.6.1.5.5.7.21.1
# Options for generating a CRL
# The number of days the next CRL update will be due.
# next CRL update will be in 43 days
#crl_next_update = 43
# this is the 5th CRL by this CA
# Comment the field for a time-based number.
#crl_number = 5
# Specify the update dates more precisely.
#crl_this_update_date = "2004-02-29 16:21:42"
#crl_next_update_date = "2025-02-29 16:24:41"
# The date that the certificates will be made seen as
# being revoked.
#crl_revocation_date = "2025-02-29 16:24:41"
server.cfg
# X.509 Certificate options
#
# DN options
# The organization of the subject.
organization = "Example"
# The organizational unit of the subject.
unit = "Example"
# The locality of the subject.
# locality =
# The state of the certificate owner.
#state = ""
# The country of the subject. Two letter code.
country = US
# The common name of the certificate owner.
cn = "Test Server"
# A user id of the certificate owner.
#uid = "clauper"
# Set domain components
#dc = "name"
#dc = "domain"
# If the supported DN OIDs are not adequate you can set
# any OID here.
# For example set the X.520 Title and the X.520 Pseudonym
# by using OID and string pairs.
#dn_oid = "2.5.4.12 Dr."
#dn_oid = "2.5.4.65 jackal"
# This is deprecated and should not be used in new
# certificates.
# pkcs9_email = "none@none.org"
# An alternative way to set the certificate's distinguished name directly
# is with the "dn" option. The attribute names allowed are:
# C (country), street, O (organization), OU (unit), title, CN (common name),
# L (locality), ST (state), placeOfBirth, gender, countryOfCitizenship,
# countryOfResidence, serialNumber, telephoneNumber, surName, initials,
# generationQualifier, givenName, pseudonym, dnQualifier, postalCode, name,
# businessCategory, DC, UID, jurisdictionOfIncorporationLocalityName,
# jurisdictionOfIncorporationStateOrProvinceName,
# jurisdictionOfIncorporationCountryName, XmppAddr, and numeric OIDs.
#dn = "cn = Nikos,st = New Something,C=GR,surName=Mavrogiannopoulos,2.5.4.9=Arkadias"
# The serial number of the certificate
# Comment the field for a time-based serial number.
# serial = 007
# In how many days, counting from today, this certificate will expire.
# Use -1 if there is no expiration date.
expiration_days = 3650
# Alternatively you may set concrete dates and time. The GNU date string
# formats are accepted. See:
# http://www.gnu.org/software/tar/manual/html_node/Date-input-formats.html
#activation_date = "2004-02-29 16:21:42"
#expiration_date = "2025-02-29 16:24:41"
# X.509 v3 extensions
# A dnsname in case of a WWW server.
#dns_name = "www.none.org"
#dns_name = "www.morethanone.org"
# An othername defined by an OID and a hex encoded string
#other_name = "1.3.6.1.5.2.2 302ca00d1b0b56414e5245494e2e4f5247a11b3019a006020400000002a10f300d1b047269636b1b0561646d696e"
#other_name_utf8 = "1.2.4.5.6 A UTF8 string"
#other_name_octet = "1.2.4.5.6 A string that will be encoded as ASN.1 octet string"
# Allows writing an XmppAddr Identifier
#xmpp_name = juliet@im.example.com
# Names used in PKINIT
#krb5_principal = user@REALM.COM
#krb5_principal = HTTP/user@REALM.COM
# A subject alternative name URI
#uri = "http://www.example.com"
# An IP address in case of a server.
#ip_address = "192.168.1.1"
# An email in case of a person
# email = "none@none.org"
# TLS feature (rfc7633) extension. That can is used to indicate mandatory TLS
# extension features to be provided by the server. In practice this is used
# to require the Status Request (extid: 5) extension from the server. That is,
# to require the server holding this certificate to provide a stapled OCSP response.
# You can have multiple lines for multiple TLS features.
# To ask for OCSP status request use:
#tls_feature = 5
# Challenge password used in certificate requests
challenge_password =
# Password when encrypting a private key
#password = secret
# An URL that has CRLs (certificate revocation lists)
# available. Needed in CA certificates.
#crl_dist_points = "http://www.getcrl.crl/getcrl/"
# Whether this is a CA certificate or not
#ca
# Subject Unique ID (in hex)
#subject_unique_id = 00153224
# Issuer Unique ID (in hex)
#issuer_unique_id = 00153225
#### Key usage
# The following key usage flags are used by CAs and end certificates
# Whether this certificate will be used to sign data (needed
# in TLS DHE ciphersuites). This is the digitalSignature flag
# in RFC5280 terminology.
#signing_key
# Whether this certificate will be used to encrypt data (needed
# in TLS RSA ciphersuites). Note that it is preferred to use different
# keys for encryption and signing. This is the keyEncipherment flag
# in RFC5280 terminology.
#encryption_key
# Whether this key will be used to sign other certificates. The
# keyCertSign flag in RFC5280 terminology.
#cert_signing_key
# Whether this key will be used to sign CRLs. The
# cRLSign flag in RFC5280 terminology.
#crl_signing_key
# The keyAgreement flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#key_agreement
# The dataEncipherment flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#data_encipherment
# The nonRepudiation flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#non_repudiation
#### Extended key usage (key purposes)
# The following extensions are used in an end certificate
# to clarify its purpose. Some CAs also use it to indicate
# the types of certificates they are purposed to sign.
# Whether this certificate will be used for a TLS client;
# this sets the id-kp-serverAuth (1.3.6.1.5.5.7.3.1) of
# extended key usage.
tls_www_client
# Whether this certificate will be used for a TLS server;
# This sets the id-kp-clientAuth (1.3.6.1.5.5.7.3.2) of
# extended key usage.
tls_www_server
# Whether this key will be used to sign code. This sets the
# id-kp-codeSigning (1.3.6.1.5.5.7.3.3) of extended key usage
# extension.
#code_signing_key
# Whether this key will be used to sign OCSP data. This sets the
# id-kp-OCSPSigning (1.3.6.1.5.5.7.3.9) of extended key usage extension.
#ocsp_signing_key
# Whether this key will be used for time stamping. This sets the
# id-kp-timeStamping (1.3.6.1.5.5.7.3.8) of extended key usage extension.
#time_stamping_key
# Whether this key will be used for email protection. This sets the
# id-kp-emailProtection (1.3.6.1.5.5.7.3.4) of extended key usage extension.
#email_protection_key
# Whether this key will be used for IPsec IKE operations (1.3.6.1.5.5.7.3.17).
#ipsec_ike_key
## adding custom key purpose OIDs
# for microsoft smart card logon
# key_purpose_oid = 1.3.6.1.4.1.311.20.2.2
# for email protection
# key_purpose_oid = 1.3.6.1.5.5.7.3.4
# for any purpose (must not be used in intermediate CA certificates)
# key_purpose_oid = 2.5.29.37.0
### end of key purpose OIDs
### Adding arbitrary extensions
# This requires to provide the extension OIDs, as well as the extension data in
# hex format. The following two options are available since GnuTLS 3.5.3.
#add_extension = "1.2.3.4 0x0AAB01ACFE"
# As above but encode the data as an octet string
#add_extension = "1.2.3.4 octet_string(0x0AAB01ACFE)"
# For portability critical extensions shouldn't be set to certificates.
#add_critical_extension = "5.6.7.8 0x1AAB01ACFE"
# When generating a certificate from a certificate
# request, then honor the extensions stored in the request
# and store them in the real certificate.
#honor_crq_extensions
# Alternatively only specific extensions can be copied.
#honor_crq_ext = 2.5.29.17
#honor_crq_ext = 2.5.29.15
# Path length contraint. Sets the maximum number of
# certificates that can be used to certify this certificate.
# (i.e. the certificate chain length)
#path_len = -1
#path_len = 2
# OCSP URI
# ocsp_uri = http://my.ocsp.server/ocsp
# CA issuers URI
# ca_issuers_uri = http://my.ca.issuer
# Certificate policies
#policy1 = 1.3.6.1.4.1.5484.1.10.99.1.0
#policy1_txt = "This is a long policy to summarize"
#policy1_url = http://www.example.com/a-policy-to-read
#policy2 = 1.3.6.1.4.1.5484.1.10.99.1.1
#policy2_txt = "This is a short policy"
#policy2_url = http://www.example.com/another-policy-to-read
# Name constraints
# DNS
#nc_permit_dns = example.com
#nc_exclude_dns = test.example.com
# EMAIL
#nc_permit_email = "nmav@ex.net"
# Exclude subdomains of example.com
#nc_exclude_email = .example.com
# Exclude all e-mail addresses of example.com
#nc_exclude_email = example.com
# IP
#nc_permit_ip = 192.168.0.0/16
#nc_exclude_ip = 192.168.5.0/24
#nc_permit_ip = fc0a:eef2:e7e7:a56e::/64
# Options for proxy certificates
#proxy_policy_language = 1.3.6.1.5.5.7.21.1
# Options for generating a CRL
# The number of days the next CRL update will be due.
# next CRL update will be in 43 days
#crl_next_update = 43
# this is the 5th CRL by this CA
# Comment the field for a time-based number.
#crl_number = 5
# Specify the update dates more precisely.
#crl_this_update_date = "2004-02-29 16:21:42"
#crl_next_update_date = "2025-02-29 16:24:41"
# The date that the certificates will be made seen as
# being revoked.
#crl_revocation_date = "2025-02-29 16:24:41"
ca.cfg
# X.509 Certificate options
#
# DN options
# The organization of the subject.
organization = "Example"
# The organizational unit of the subject.
unit = "Example"
# The locality of the subject.
# locality =
# The state of the certificate owner.
#state = ""
# The country of the subject. Two letter code.
country = US
# The common name of the certificate owner.
cn = "CA-Cert"
# A user id of the certificate owner.
#uid = "clauper"
# Set domain components
#dc = "name"
#dc = "domain"
# If the supported DN OIDs are not adequate you can set
# any OID here.
# For example set the X.520 Title and the X.520 Pseudonym
# by using OID and string pairs.
#dn_oid = "2.5.4.12 Dr."
#dn_oid = "2.5.4.65 jackal"
# This is deprecated and should not be used in new
# certificates.
# pkcs9_email = "none@none.org"
# An alternative way to set the certificate's distinguished name directly
# is with the "dn" option. The attribute names allowed are:
# C (country), street, O (organization), OU (unit), title, CN (common name),
# L (locality), ST (state), placeOfBirth, gender, countryOfCitizenship,
# countryOfResidence, serialNumber, telephoneNumber, surName, initials,
# generationQualifier, givenName, pseudonym, dnQualifier, postalCode, name,
# businessCategory, DC, UID, jurisdictionOfIncorporationLocalityName,
# jurisdictionOfIncorporationStateOrProvinceName,
# jurisdictionOfIncorporationCountryName, XmppAddr, and numeric OIDs.
#dn = "cn = Nikos,st = New Something,C=GR,surName=Mavrogiannopoulos,2.5.4.9=Arkadias"
# The serial number of the certificate
# Comment the field for a time-based serial number.
# serial = 007
# In how many days, counting from today, this certificate will expire.
# Use -1 if there is no expiration date.
expiration_days = 3650
# Alternatively you may set concrete dates and time. The GNU date string
# formats are accepted. See:
# http://www.gnu.org/software/tar/manual/html_node/Date-input-formats.html
#activation_date = "2004-02-29 16:21:42"
#expiration_date = "2025-02-29 16:24:41"
# X.509 v3 extensions
# A dnsname in case of a WWW server.
#dns_name = "www.none.org"
#dns_name = "www.morethanone.org"
# An othername defined by an OID and a hex encoded string
#other_name = "1.3.6.1.5.2.2 302ca00d1b0b56414e5245494e2e4f5247a11b3019a006020400000002a10f300d1b047269636b1b0561646d696e"
#other_name_utf8 = "1.2.4.5.6 A UTF8 string"
#other_name_octet = "1.2.4.5.6 A string that will be encoded as ASN.1 octet string"
# Allows writing an XmppAddr Identifier
#xmpp_name = juliet@im.example.com
# Names used in PKINIT
#krb5_principal = user@REALM.COM
#krb5_principal = HTTP/user@REALM.COM
# A subject alternative name URI
#uri = "http://www.example.com"
# An IP address in case of a server.
#ip_address = "192.168.1.1"
# An email in case of a person
# email = "none@none.org"
# TLS feature (rfc7633) extension. That can is used to indicate mandatory TLS
# extension features to be provided by the server. In practice this is used
# to require the Status Request (extid: 5) extension from the server. That is,
# to require the server holding this certificate to provide a stapled OCSP response.
# You can have multiple lines for multiple TLS features.
# To ask for OCSP status request use:
#tls_feature = 5
# Challenge password used in certificate requests
challenge_password =
# Password when encrypting a private key
#password = secret
# An URL that has CRLs (certificate revocation lists)
# available. Needed in CA certificates.
#crl_dist_points = "http://www.getcrl.crl/getcrl/"
# Whether this is a CA certificate or not
ca
# Subject Unique ID (in hex)
#subject_unique_id = 00153224
# Issuer Unique ID (in hex)
#issuer_unique_id = 00153225
#### Key usage
# The following key usage flags are used by CAs and end certificates
# Whether this certificate will be used to sign data (needed
# in TLS DHE ciphersuites). This is the digitalSignature flag
# in RFC5280 terminology.
signing_key
# Whether this certificate will be used to encrypt data (needed
# in TLS RSA ciphersuites). Note that it is preferred to use different
# keys for encryption and signing. This is the keyEncipherment flag
# in RFC5280 terminology.
#encryption_key
# Whether this key will be used to sign other certificates. The
# keyCertSign flag in RFC5280 terminology.
cert_signing_key
# Whether this key will be used to sign CRLs. The
# cRLSign flag in RFC5280 terminology.
#crl_signing_key
# The keyAgreement flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#key_agreement
# The dataEncipherment flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#data_encipherment
# The nonRepudiation flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#non_repudiation
#### Extended key usage (key purposes)
# The following extensions are used in an end certificate
# to clarify its purpose. Some CAs also use it to indicate
# the types of certificates they are purposed to sign.
# Whether this certificate will be used for a TLS client;
# this sets the id-kp-serverAuth (1.3.6.1.5.5.7.3.1) of
# extended key usage.
#tls_www_client
# Whether this certificate will be used for a TLS server;
# This sets the id-kp-clientAuth (1.3.6.1.5.5.7.3.2) of
# extended key usage.
#tls_www_server
# Whether this key will be used to sign code. This sets the
# id-kp-codeSigning (1.3.6.1.5.5.7.3.3) of extended key usage
# extension.
#code_signing_key
# Whether this key will be used to sign OCSP data. This sets the
# id-kp-OCSPSigning (1.3.6.1.5.5.7.3.9) of extended key usage extension.
#ocsp_signing_key
# Whether this key will be used for time stamping. This sets the
# id-kp-timeStamping (1.3.6.1.5.5.7.3.8) of extended key usage extension.
#time_stamping_key
# Whether this key will be used for email protection. This sets the
# id-kp-emailProtection (1.3.6.1.5.5.7.3.4) of extended key usage extension.
#email_protection_key
# Whether this key will be used for IPsec IKE operations (1.3.6.1.5.5.7.3.17).
#ipsec_ike_key
## adding custom key purpose OIDs
# for microsoft smart card logon
# key_purpose_oid = 1.3.6.1.4.1.311.20.2.2
# for email protection
# key_purpose_oid = 1.3.6.1.5.5.7.3.4
# for any purpose (must not be used in intermediate CA certificates)
# key_purpose_oid = 2.5.29.37.0
### end of key purpose OIDs
### Adding arbitrary extensions
# This requires to provide the extension OIDs, as well as the extension data in
# hex format. The following two options are available since GnuTLS 3.5.3.
#add_extension = "1.2.3.4 0x0AAB01ACFE"
# As above but encode the data as an octet string
#add_extension = "1.2.3.4 octet_string(0x0AAB01ACFE)"
# For portability critical extensions shouldn't be set to certificates.
#add_critical_extension = "5.6.7.8 0x1AAB01ACFE"
# When generating a certificate from a certificate
# request, then honor the extensions stored in the request
# and store them in the real certificate.
#honor_crq_extensions
# Alternatively only specific extensions can be copied.
#honor_crq_ext = 2.5.29.17
#honor_crq_ext = 2.5.29.15
# Path length contraint. Sets the maximum number of
# certificates that can be used to certify this certificate.
# (i.e. the certificate chain length)
#path_len = -1
#path_len = 2
# OCSP URI
# ocsp_uri = http://my.ocsp.server/ocsp
# CA issuers URI
# ca_issuers_uri = http://my.ca.issuer
# Certificate policies
#policy1 = 1.3.6.1.4.1.5484.1.10.99.1.0
#policy1_txt = "This is a long policy to summarize"
#policy1_url = http://www.example.com/a-policy-to-read
#policy2 = 1.3.6.1.4.1.5484.1.10.99.1.1
#policy2_txt = "This is a short policy"
#policy2_url = http://www.example.com/another-policy-to-read
# Name constraints
# DNS
#nc_permit_dns = example.com
#nc_exclude_dns = test.example.com
# EMAIL
#nc_permit_email = "nmav@ex.net"
# Exclude subdomains of example.com
#nc_exclude_email = .example.com
# Exclude all e-mail addresses of example.com
#nc_exclude_email = example.com
# IP
#nc_permit_ip = 192.168.0.0/16
#nc_exclude_ip = 192.168.5.0/24
#nc_permit_ip = fc0a:eef2:e7e7:a56e::/64
# Options for proxy certificates
#proxy_policy_language = 1.3.6.1.5.5.7.21.1
# Options for generating a CRL
# The number of days the next CRL update will be due.
# next CRL update will be in 43 days
#crl_next_update = 43
# this is the 5th CRL by this CA
# Comment the field for a time-based number.
#crl_number = 5
# Specify the update dates more precisely.
#crl_this_update_date = "2004-02-29 16:21:42"
#crl_next_update_date = "2025-02-29 16:24:41"
# The date that the certificates will be made seen as
# being revoked.
#crl_revocation_date = "2025-02-29 16:24:41"
generate-ca.sh
# This creates the private CA Key
certtool --generate-privkey --outfile ca-key.pem --bits 2048
# This creates the CA cert
certtool --generate-self-signed --load-privkey ca-key.pem --outfile ca.pem --template ca.cfg
generate-client.sh
# This creates the private CA Key
certtool --generate-privkey --outfile client-key.pem --bits 2048
# This creates the cert request
certtool --generate-request --load-privkey client-key.pem --outfile request.pem --template client.cfg
# This creates the client cert
certtool --generate-certificate --load-request request.pem --outfile client-cert.pem --load-ca-certificate ca.pem --load-ca-privkey ca-key.pem --template client.cfg
# Cleanup
rm -f request.pem
generate-server.sh
# This creates the private CA Key
certtool --generate-privkey --outfile server-key.pem --bits 2048
# This creates the cert request
certtool --generate-request --load-privkey server-key.pem --outfile request.pem --template server.cfg
# This creates the client cert
certtool --generate-certificate --load-request request.pem --outfile server-cert.pem --load-ca-certificate ca.pem --load-ca-privkey ca-key.pem --template server.cfg
# Cleanup
rm -f request.pem
扫一扫
561
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
