meta工具锁网参数解析

先介绍一下Modem META ver 10.1916.0.00工具的简单用法
1.先打开工具
2.直接用手机连接工具
3.如果需要查看工具的NVRAM Editor,先导入Load DB
4.在搜索框中找到NVRAM Editor

请看下面的截图部分,这是我连接80GO的手机所看到的情况：

因为要在工具中对手机进行锁网操作，所以我先找到NVRAM_EF_SML_LID,左边是对应的各个参数，如果在modem端修改过锁网的话，那么对比代码来看，应该就很好理解了

cat[0]：state – 0x01（锁网），0x02（不锁网）；
retry_count – 可以解锁的次数；
num – code_cat_n中有效集合个数
code_cat_n：配置锁网列表

custom/service/nvram/custom_nvram_sec.c

 #else /* CUSTOM_SML_DEFAULT */
            {{SML_STATE_LOCK,SML_RETRY_COUNT_N_CAT,0,3},     /* Category N */
            {SML_STATE_UNLOCK,SML_RETRY_COUNT_NS_CAT ,0,0},   /* Category NS */
            {SML_STATE_UNLOCK,SML_RETRY_COUNT_SP_CAT ,0,0},   /* Category SP */
            {SML_STATE_UNLOCK,SML_RETRY_COUNT_C_CAT ,0,0},    /* Category C */
            {SML_STATE_UNLOCK,SML_RETRY_COUNT_SIM_CAT ,0,0},  /* Category SIM */
            {SML_STATE_UNLOCK,SML_RETRY_COUNT_NS_CAT ,0,0},   /* Link NS-SP */
            {SML_STATE_UNLOCK,SML_RETRY_COUNT_C_CAT ,0,0}},    /* Link SIM-C */

代码与工具的参数的对应关系：
cat中的cat[0]的四个参数
state----->SML_STATE_LOCK
retry_count----->SML_RETRY_COUNT_N_CAT
autolock_count---->0
num---->3
而code_cat_n中的数组对应下面的数组

/* Category N code */
            {0x46,0x00,0x1F,
             0x23,0x43,0x0F,
             0x23,0x43,0x3F,
             0xFF,0xFF,0xFF,
             0xFF,0xFF,0xFF,
             0xFF,0xFF,0xFF,
             0xFF,0xFF,0xFF,
             0xFF,0xFF,0xFF,
             0xFF,0xFF,0xFF,
             0xFF,0xFF,0xFF}, 
            /* Category NS code */
            {0xc2,0xc2,0xc2,0xc2,
             0xFF,0xFF,0xFF,0xFF},
            /* Category SP code */
            {0xc3,0xc3,0xc3,0xc3,
             0xFF,0xFF,0xFF,0xFF},
            /* Category C code */
            {0xc4,0xc4,0xc4,0xc4,0xc4,
             0xFF,0xFF,0xFF,0xFF,0xFF},
            /* Category SIM code */
            {0xc5,0xc5,0xc5,0xc5,0xc5,0xc5,0xc5,0xc5,
             0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
            /* Link Category NS-SP */
            {0xc6,0xc6,0xc6,0xc6,0xc6,
             0xFF,0xFF,0xFF,0xFF,0xFF},
            /* Link Category SIM-C */
            {0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,
             0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},        
            /* NS Range size */
            {0xFF,0xFF},

我上是锁了3张卡，所以对应的下面这几个数组都需要写上卡的mccmnc。
code_cat_n[0],code_cat_n[1],code_cat_n[2],
code_cat_n[3],code_cat_n[4],code_cat_n[5],
code_cat_n[6],code_cat_n[7],code_cat_n[8]