Arduino之坑（三）——复位方式

   除了重新烧录代码和按下复位键的方法外，Arduino还自带重置函数：

不使用任何硬件引脚，Arduino有一个名为resetFunc（）的内置函数，我们声明函数地址为0，当我们执行此功能时，Arduino将自动重置。

说明： –In this method, we are not gonna use any hardware pin, instead we will do everything in programming. –Arduino has a builtin function named as resetFunc() which we need to declare at address 0 and when we execute this function Arduino gets reset automatically. –So, no need of doing anything in hardware and simply upload the below code in your Arduino board.

 

void(* resetFunc) (void) = 0;

void setup() {       Serial.begin(9600);   Serial.println("How to Reset Arduino Programmatically");   delay(200); }

void loop() {   Serial.println("A");   delay(1000);                 Serial.println("B");   delay(1000);                 Serial.println("Now we are Resetting Arduino Programmatically");   Serial.println();   delay(1000);   resetFunc();   Serial.println("Arrduino will never reach there.");

 

参考连接：https://blog.csdn.net/weixin_30399821/article/details/96811509