控制stm32上灯的亮灭
一:使用寄存器控制stm32上的灯的点亮
点亮
#include "stm32f10x.h" // Device header
int main(void)
{
RCC->APB2ENR=0x00000010;
GPIOC->CRH=0x00300000;
GPIOC->ODR=0x00000000;
while(1)
{
}
}
熄灭
#include "stm32f10x.h" // Device header
int main(void)
{
RCC->APB2ENR=0x00000010;
GPIOC->CRH=0x00300000;
GPIOC->ODR=0x00002000;
while(1)
{
}
}
二:使用库函数
#include "stm32f10x.h" // Device header
int main(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOC, &GPIO_InitStructure);
// GPIO_SetBits(GPIOC, GPIO_Pin_13);
GPIO_ResetBits(GPIOC, GPIO_Pin_13);
while (1)
{
}
}