1. Java NIO 简介
1.1.Java NIO 简介
l Java NIO(New IO)是从Java 1.4版本开始引入的一个新的IO API,可以替代标准的Java IO API。NIO与原来的IO有同样的作用和目的,但是使用的方式完全不同,NIO支持面向缓冲区的、基于 通道的IO操作。NIO将以更加高效的方式进行文件的读写操作。
1.2.Java NIO 与IO 的主要区别
IO | NIO |
面向流(Stream Oriented) | 面向缓冲区(Buffer Oriented) |
阻塞IO(Blocking IO) | 非阻塞IO(Non Blocking IO) |
(无) | 选择器(Selectors) |
2. 缓冲区
2.1.缓冲区
Java NIO系统的核心在于:通道(Channel)和缓冲区(Buffer)。通道表示打开到IO 设备(例如:文件、套接字)的连接。若需要使用NIO 系统,需要获取用于连接IO 设备的通道以及用于容纳数据的缓冲区。然后操作缓冲区,对数据进行处理
简而言之,Channel 负责传输,Buffer 负责存储
Buffer 就像一个数组,可以保存多个相同类型的数据。根据数据类型不同(boolean 除外) ,有以下Buffer 常用子类:
ByteBuffer
CharBuffer
ShortBuffer
IntBuffer
LongBuffer
FloatBuffer
DoubleBuffer
上述Buffer 类他们都采用相似的方法进行管理数据,只是各自管理的数据类型不同而已。都是通过如下方法获取一个Buffer 对象:
static XxxBuffer allocate(int capacity) : 创建一个容量为capacity 的XxxBuffer 对象
2.2.缓冲区的基本属性
Ø 容量(capacity) :表示Buffer 最大数据容量,缓冲区容量不能为负,并且创建后不能更改。
Ø 限制(limit):第一个不应该读取或写入的数据的索引,即位于limit 后的数据
不可读写。缓冲区的限制不能为负,并且不能大于其容量。
Ø 位置(position):下一个要读取或写入的数据的索引。缓冲区的位置不能为负,并且不能大于其限制
Ø 标记(mark)与重置(reset):标记是一个索引,通过Buffer 中的mark() 方法指定Buffer 中一个特定的position,之后可以通过调用reset() 方法恢复到这个position.
l 标记、位置、限制、容量遵守以下不变式:0 <= mark <= position <= limit <= capacity
2.2.缓冲区的常用方法
2.3.缓冲区的数据操作
Buffer 所有子类提供了两个用于数据操作的方法:get() 与put() 方法
获取Buffer 中的数据
get() :读取单个字节
get(byte[] dst):批量读取多个字节到dst 中
get(int index):读取指定索引位置的字节(不会移动position)
放入数据到Buffer 中
put(byte b):将给定单个字节写入缓冲区的当前位置put(byte[] src):将src 中的字节写入缓冲区的当前位置
put(int index, byte b):将指定字节写入缓冲区的索引位置(不会移动position)
2.4.直接与非直接缓冲区
字节缓冲区要么是直接的,要么是非直接的。如果为直接字节缓冲区,则Java 虚拟机会尽最大努力直接在此缓冲区上执行本机I/O 操作。也就是说,在每次调用基础操作系统的一个本机I/O 操作之前(或之后), 虚拟机都会尽量避免将缓冲区的内容复制到中间缓冲区中(或从中间缓冲区中复制内容)。
直接字节缓冲区可以通过调用此类的allocateDirect() 工厂方法来创建。此方法返回的缓冲区进行分配和取消分配所需成本通常高于非直接缓冲区。直接缓冲区的内容可以驻留在常规的垃圾回收堆之外,因此,它们对应用程序的内存需求量造成的影响可能并不明显。所以,建议将直接缓冲区主要分配给那些易受基础系统的本机I/O 操作影响的大型、持久的缓冲区。一般情况下,最好仅在直接缓冲区能在程序性能方面带来明显好处时分配它们。
直接字节缓冲区还可以通过FileChannel 的map() 方法将文件区域直接映射到内存中来创建。该方法返回MappedByteBuffer 。Java 平台的实现有助于通过JNI 从本机代码创建直接字节缓冲区。如果以上这些缓冲区中的某个缓冲区实例指的是不可访问的内存区域,则试图访问该区域不会更改该缓冲区的内容,并且将会在访问期间或稍后的某个时间导致抛出不确定的异常。
字节缓冲区是直接缓冲区还是非直接缓冲区可通过调用其isDirect() 方法来确定。提供此方法是为了能够在性能关键型代码中执行显式缓冲区管理。
代码示例
package com.atguigu.nio; import java.nio.ByteBuffer; import org.junit.Test; /* * 一、缓冲区(Buffer):在 Java NIO 中负责数据的存取。缓冲区就是数组。用于存储不同数据类型的数据 * * 根据数据类型不同(boolean 除外),提供了相应类型的缓冲区: * ByteBuffer * CharBuffer * ShortBuffer * IntBuffer * LongBuffer * FloatBuffer * DoubleBuffer * * 上述缓冲区的管理方式几乎一致,通过 allocate() 获取缓冲区 * * 二、缓冲区存取数据的两个核心方法: * put() : 存入数据到缓冲区中 * get() : 获取缓冲区中的数据 * * 三、缓冲区中的四个核心属性: * capacity : 容量,表示缓冲区中最大存储数据的容量。一旦声明不能改变。 * limit : 界限,表示缓冲区中可以操作数据的大小。(limit 后数据不能进行读写) * position : 位置,表示缓冲区中正在操作数据的位置。 * * mark : 标记,表示记录当前 position 的位置。可以通过 reset() 恢复到 mark 的位置 * * 0 <= mark <= position <= limit <= capacity * * 四、直接缓冲区与非直接缓冲区: * 非直接缓冲区:通过 allocate() 方法分配缓冲区,将缓冲区建立在 JVM 的内存中 * 直接缓冲区:通过 allocateDirect() 方法分配直接缓冲区,将缓冲区建立在物理内存中。可以提高效率 */ public class TestBuffer { @Test public void test3(){ //分配直接缓冲区 ByteBuffer buf = ByteBuffer.allocateDirect(1024); System.out.println(buf.isDirect()); //true } @Test public void test2(){ String str = "abcde"; ByteBuffer buf = ByteBuffer.allocate(1024); buf.put(str.getBytes()); buf.flip(); byte[] dst = new byte[buf.limit()]; buf.get(dst, 0, 2); System.out.println(new String(dst, 0, 2)); //ab System.out.println(buf.position()); //2 //mark() : 标记 buf.mark(); buf.get(dst, 2, 2); System.out.println(new String(dst, 2, 2));//cd System.out.println(buf.position()); //4 //reset() : 恢复到 mark 的位置 buf.reset(); System.out.println(buf.position()); //2 //判断缓冲区中是否还有剩余数据 if(buf.hasRemaining()){ //获取缓冲区中可以操作的数量 System.out.println(buf.remaining()); //3 } } @Test public void test1(){ String str = "abcde"; //1. 分配一个指定大小的缓冲区 ByteBuffer buf = ByteBuffer.allocate(1024); System.out.println("-----------------allocate()----------------"); System.out.println(buf.position()); // 0 System.out.println(buf.limit()); //1024 System.out.println(buf.capacity()); //1024 //2. 利用 put() 存入数据到缓冲区中 buf.put(str.getBytes()); System.out.println("-----------------put()----------------"); System.out.println(buf.position()); //5 System.out.println(buf.limit()); //1024 System.out.println(buf.capacity()); //1024 //3. 切换读取数据模式 buf.flip(); System.out.println("-----------------flip()----------------"); System.out.println(buf.position()); //0 System.out.println(buf.limit()); //5 System.out.println(buf.capacity()); //1024 //4. 利用 get() 读取缓冲区中的数据 byte[] dst = new byte[buf.limit()]; buf.get(dst); System.out.println(new String(dst, 0, dst.length)); //abcde System.out.println("-----------------get()----------------"); System.out.println(buf.position()); //5 System.out.println(buf.limit()); //5 System.out.println(buf.capacity()); //1024 //5. rewind() : 可重复读 buf.rewind(); System.out.println("-----------------rewind()----------------"); System.out.println(buf.position()); //0 System.out.println(buf.limit()); //5 System.out.println(buf.capacity()); //1024 //6. clear() : 清空缓冲区. 但是缓冲区中的数据依然存在,但是处于“被遗忘”状态 buf.clear(); System.out.println("-----------------clear()----------------"); System.out.println(buf.position()); //0 System.out.println(buf.limit()); //1024 System.out.println(buf.capacity()); //1024 System.out.println((char)buf.get()); //a } }
3. 通道
通道(Channel):由java.nio.channels 包定义的。Channel 表示IO 源与目标打开的连接。Channel 类似于传统的“流”。只不过Channel 本身不能直接访问数据,Channel 只能与Buffer 进行交互。
Java 为Channel 接口提供的最主要实现类如下:
• FileChannel:用于读取、写入、映射和操作文件的通道。
• DatagramChannel:通过UDP 读写网络中的数据通道。
• SocketChannel:通过TCP 读写网络中的数据。
• ServerSocketChannel:可以监听新进来的TCP 连接,对每一个新进来的连接都会创建一个 SocketChannel。
3.1获取通道
获取通道的一种方式是对支持通道的对象调用getChannel() 方法。
支持通道的类如下:
Ø FileInputStream
Ø FileOutputStream
Ø RandomAccessFile
Ø DatagramSocket
Ø Socket
Ø ServerSocket
FileInputStream fileInputStream = new FileInputStream("F:"+ File.separator+"aaa"+File.separator+"aaa.txt"); FileOutputStream fileOutputStream = new FileOutputStream("F:"+ File.separator+"aaa"+File.separator+"bbb.txt"); //1.1获取通道 FileChannel inChannel = fileInputStream.getChannel(); FileChannel outChannel = fileOutputStream.getChannel();
使用Files 类的静态方法newByteChannel() 获取字节通道。
通过通道的静态方法open() 打开并返回指定通道。
FileChannel inChannel = FileChannel.open(Paths.get("d:/1.mkv"), StandardOpenOption.READ); FileChannel outChannel = FileChannel.open(Paths.get("d:/2.mkv"), StandardOpenOption.WRITE, StandardOpenOption.READ, StandardOpenOption.CREATE);
3.2.通道数据传输
通过通道和buffer读写复制文件(非直接缓冲区)
package nioTest.channelTest; import java.io.File; import java.io.FileInputStream; import java.io.FileOutputStream; import java.nio.ByteBuffer; import java.nio.channels.FileChannel; public class ChannelTest { public static void main(String[] args) throws Exception{ /** * 1 非直接通道通过buffer读取与复制 */ FileInputStream fileInputStream = new FileInputStream("F:"+ File.separator+"aaa"+File.separator+"aaa.txt"); FileOutputStream fileOutputStream = new FileOutputStream("F:"+ File.separator+"aaa"+File.separator+"bbb.txt"); //1.1获取通道 FileChannel inChannel = fileInputStream.getChannel(); FileChannel outChannel = fileOutputStream.getChannel(); //1.2获取缓冲 ByteBuffer bytebuffer = ByteBuffer.allocate(1024); //1.3将通道数据写入buffer中 while( inChannel.read(bytebuffer) != -1 ){ //开启读模式 bytebuffer.flip(); //1.4将buffer数据写进通道内 outChannel.read(bytebuffer); //清空 bytebuffer.clear(); } //1.3关闭通道和流 inChannel.close(); outChannel.close(); fileInputStream.close(); fileOutputStream.close(); //2 直接通到通过内存映射直接读取与复制 //3 通道直接直接读取与复制,原理也是直接缓冲 } }
使用直接缓冲区复制文件
//使用直接缓冲区完成文件的复制(内存映射文件) @Test public void test2() throws IOException{ long start = System.currentTimeMillis(); //获取通道 FileChannel inChannel = FileChannel.open(Paths.get("d:/1.mkv"), StandardOpenOption.READ); FileChannel outChannel = FileChannel.open(Paths.get("d:/2.mkv"), StandardOpenOption.WRITE, StandardOpenOption.READ, StandardOpenOption.CREATE); //内存映射文件 MappedByteBuffer inMappedBuf = inChannel.map(MapMode.READ_ONLY, 0, inChannel.size()); MappedByteBuffer outMappedBuf = outChannel.map(MapMode.READ_WRITE, 0, inChannel.size()); //直接对缓冲区进行数据的读写操作 byte[] dst = new byte[inMappedBuf.limit()]; //文件写入到dst中 inMappedBuf.get(dst); //dst写进到文件里 outMappedBuf.put(dst); //关闭通道 inChannel.close(); outChannel.close(); long end = System.currentTimeMillis(); System.out.println("耗费时间为:" + (end - start)); }
直接缓冲区便捷方法(通道复制通道)
//通道之间的数据传输(直接缓冲区) @Test public void test3() throws IOException{ FileChannel inChannel = FileChannel.open(Paths.get("d:/1.mkv"), StandardOpenOption.READ); FileChannel outChannel = FileChannel.open(Paths.get("d:/2.mkv"), StandardOpenOption.WRITE, StandardOpenOption.READ, StandardOpenOption.CREATE); // inChannel.transferTo(0, inChannel.size(), outChannel); // 通道复制通道 outChannel.transferFrom(inChannel, 0, inChannel.size()); inChannel.close(); outChannel.close(); }
3.2.分散和聚集
//分散和聚集 @Test public void test4() throws IOException{ RandomAccessFile raf1 = new RandomAccessFile("1.txt", "rw"); //1. 获取通道 FileChannel channel1 = raf1.getChannel(); //2. 分配指定大小的缓冲区 ByteBuffer buf1 = ByteBuffer.allocate(100); ByteBuffer buf2 = ByteBuffer.allocate(1024); //3. 分散读取 ByteBuffer[] bufs = {buf1, buf2}; channel1.read(bufs); for (ByteBuffer byteBuffer : bufs) { byteBuffer.flip(); } System.out.println(new String(bufs[0].array(), 0, bufs[0].limit())); System.out.println("-----------------"); System.out.println(new String(bufs[1].array(), 0, bufs[1].limit())); //4. 聚集写入 RandomAccessFile raf2 = new RandomAccessFile("2.txt", "rw"); FileChannel channel2 = raf2.getChannel(); channel2.write(bufs); }
4. 文件通道(FileChannel)
FileChannel 的常用方法
方法 | 描述 |
int read(ByteBuffer dst) | 从Channel 中读取数据到ByteBuffer |
long read(ByteBuffer[] dsts) | 将Channel 中的数据“分散”到 ByteBuffer[] |
int write(ByteBuffer src) | 将ByteBuffer 中的数据写入到Channel |
long write(ByteBuffer[] srcs) | 将ByteBuffer[] 中的数据“聚集”到 Channel |
long position() | 返回此通道的文件位置 |
FileChannel position(long p) | 设置此通道的文件位置 |
long size() | 返回此通道的文件的当前大小 |
FileChannel truncate(long s) | 将此通道的文件截取为给定大小 |
void force(boolean metaData) | 强制将所有对此通道的文件更新写入到存储设备中 |
5. NIO 的非阻塞式网络通信
5.1.阻塞与非阻塞
传统的IO 流都是阻塞式的。也就是说,当一个线程调用read() 或write() 时,该线程被阻塞,直到有一些数据被读取或写入,该线程在此期间不能执行其他任务。因此,在完成网络通信进行IO 操作时,由于线程会阻塞,所以服务器端必须为每个客户端都提供一个独立的线程进行处理, 当服务器端需要处理大量客户端时,性能急剧下降。
Java NIO 是非阻塞模式的。当线程从某通道进行读写数据时,若没有数据可用时,该线程可以进行其他任务。线程通常将非阻塞IO 的空闲时间用于在其他通道上执行IO 操作,所以单独的线程可以管理多个输入和输出通道。因此,NIO 可以让服务器端使用一个或有限几个线程来同时处理连接到服务器端的所有客户端。
阻塞式IO
package com.atguigu.nio; import java.io.IOException; import java.net.InetSocketAddress; import java.nio.ByteBuffer; import java.nio.channels.FileChannel; import java.nio.channels.ServerSocketChannel; import java.nio.channels.SocketChannel; import java.nio.file.Paths; import java.nio.file.StandardOpenOption; import org.junit.Test; /* * 一、使用 NIO 完成网络通信的三个核心: * * 1. 通道(Channel):负责连接 * * java.nio.channels.Channel 接口: * |--SelectableChannel * |--SocketChannel * |--ServerSocketChannel * |--DatagramChannel * * |--Pipe.SinkChannel * |--Pipe.SourceChannel * * 2. 缓冲区(Buffer):负责数据的存取 * * 3. 选择器(Selector):是 SelectableChannel 的多路复用器。用于监控 SelectableChannel 的 IO 状况 * */public class TestBlockingNIO { //客户端 @Test public void client() throws IOException{ //1. 获取通道 SocketChannel sChannel = SocketChannel.open(new InetSocketAddress("127.0.0.1", 9898)); FileChannel inChannel = FileChannel.open(Paths.get("1.jpg"), StandardOpenOption.READ); //2. 分配指定大小的缓冲区 ByteBuffer buf = ByteBuffer.allocate(1024); //3. 读取本地文件,并发送到服务端 while(inChannel.read(buf) != -1){ buf.flip(); sChannel.write(buf); buf.clear(); } //4. 关闭通道 inChannel.close(); sChannel.close(); } //服务端 @Test public void server() throws IOException{ //1. 获取通道 ServerSocketChannel ssChannel = ServerSocketChannel.open(); FileChannel outChannel = FileChannel.open(Paths.get("2.jpg"), StandardOpenOption.WRITE, StandardOpenOption.CREATE); //2. 绑定连接 ssChannel.bind(new InetSocketAddress(9898)); //3. 获取客户端连接的通道 SocketChannel sChannel = ssChannel.accept(); //4. 分配指定大小的缓冲区 ByteBuffer buf = ByteBuffer.allocate(1024); //5. 接收客户端的数据,并保存到本地 while(sChannel.read(buf) != -1){ buf.flip(); outChannel.write(buf); buf.clear(); } //6. 关闭通道 sChannel.close(); outChannel.close(); ssChannel.close(); } }
5.2.选择器
当调用register(Selector sel, int ops) 将通道注册选择器时,选择器对通道的监听事件,需要通过第二个参数指定。
可以监听的事件类型(可使用SelectionKey 的四个常量表示):
Ø 读: SelectionKey.OP_READ (1)
Ø 写: SelectionKey.OP_WRITE (4)
Ø 连接: SelectionKey.OP_CONNECT(8)
Ø 接收: SelectionKey.OP_ACCEPT (16)
若注册时不止监听一个事件,则可以使用“位或”操作符连接。
非阻塞IO
package com.atguigu.nio; import java.io.IOException; import java.net.InetSocketAddress; import java.nio.ByteBuffer; import java.nio.channels.SelectionKey; import java.nio.channels.Selector; import java.nio.channels.ServerSocketChannel; import java.nio.channels.SocketChannel; import java.util.Date; import java.util.Iterator; import java.util.Scanner; import org.junit.Test; /* * 一、使用 NIO 完成网络通信的三个核心: * * 1. 通道(Channel):负责连接 * * java.nio.channels.Channel 接口: * |--SelectableChannel * |--SocketChannel * |--ServerSocketChannel * |--DatagramChannel * * |--Pipe.SinkChannel * |--Pipe.SourceChannel * * 2. 缓冲区(Buffer):负责数据的存取 * * 3. 选择器(Selector):是 SelectableChannel 的多路复用器。用于监控 SelectableChannel 的 IO 状况 * */ public class TestNonBlockingNIO { //客户端 @Test public void client() throws IOException{ //1. 获取通道 SocketChannel sChannel = SocketChannel.open(new InetSocketAddress("127.0.0.1", 9898)); //2. 切换非阻塞模式 sChannel.configureBlocking(false); //3. 分配指定大小的缓冲区 ByteBuffer buf = ByteBuffer.allocate(1024); //4. 发送数据给服务端 Scanner scan = new Scanner(System.in); while(scan.hasNext()){ String str = scan.next(); buf.put((new Date().toString() + "\n" + str).getBytes()); buf.flip(); sChannel.write(buf); buf.clear(); } //5. 关闭通道 sChannel.close(); } //服务端 @Test public void server() throws IOException{ //1. 获取通道 ServerSocketChannel ssChannel = ServerSocketChannel.open(); //2. 切换非阻塞模式 ssChannel.configureBlocking(false); //3. 绑定连接 ssChannel.bind(new InetSocketAddress(9898)); //4. 获取选择器 Selector selector = Selector.open(); //5. 将通道注册到选择器上, 并且指定“监听接收事件” ssChannel.register(selector, SelectionKey.OP_ACCEPT); //6. 轮询式的获取选择器上已经“准备就绪”的事件 while(selector.select() > 0){ //7. 获取当前选择器中所有注册的“选择键(已就绪的监听事件)” Iterator<SelectionKey> it = selector.selectedKeys().iterator(); while(it.hasNext()){ //8. 获取准备“就绪”的是事件 SelectionKey sk = it.next(); //9. 判断具体是什么事件准备就绪 if(sk.isAcceptable()){ //10. 若“接收就绪”,获取客户端连接 SocketChannel sChannel = ssChannel.accept(); //11. 切换非阻塞模式 sChannel.configureBlocking(false); //12. 将该通道注册到选择器上 sChannel.register(selector, SelectionKey.OP_READ); }else if(sk.isReadable()){ //13. 获取当前选择器上“读就绪”状态的通道 SocketChannel sChannel = (SocketChannel) sk.channel(); //14. 读取数据 ByteBuffer buf = ByteBuffer.allocate(1024); int len = 0; while((len = sChannel.read(buf)) > 0 ){ buf.flip(); System.out.println(new String(buf.array(), 0, len)); buf.clear(); } } //15. 取消选择键 SelectionKey it.remove(); } } } }
6.管道(Pipe)
Java NIO 管道是2个线程之间的单向数据连接。Pipe有一个source通道和一个sink通道。数据会被写到sink通道,从source通道读取。
6.1.向管道写数据
6.2.向管道读数据
package com.atguigu.nio; import java.io.IOException; import java.nio.ByteBuffer; import java.nio.channels.Pipe; import org.junit.Test; public class TestPipe { @Test public void test1() throws IOException{ //1. 获取管道 Pipe pipe = Pipe.open(); //2. 将缓冲区中的数据写入管道 ByteBuffer buf = ByteBuffer.allocate(1024); Pipe.SinkChannel sinkChannel = pipe.sink(); buf.put("通过单向管道发送数据".getBytes()); buf.flip(); sinkChannel.write(buf); //3. 读取缓冲区中的数据 Pipe.SourceChannel sourceChannel = pipe.source(); buf.flip(); int len = sourceChannel.read(buf); System.out.println(new String(buf.array(), 0, len)); sourceChannel.close(); sinkChannel.close(); } }
7. Java NIO2 (Path、Paths 与Files )
随着JDK 7 的发布,Java对NIO进行了极大的扩展,增强了对文件处理和文件系统特性的支持,以至于我们称他们为NIO.2。因为NIO 提供的一些功能,NIO已经成为文件处理中越来越重要的部分。
7.1.Path 与Paths
java.nio.file.Path 接口代表一个平台无关的平台路径,描述了目录结构中文件的位置。
Paths 提供的get() 方法用来获取Path 对象:
Ø Path get(String first, String … more) : 用于将多个字符串串连成路径。
Path 常用方法:
Ø boolean endsWith(String path) : 判断是否以path 路径结束
Ø boolean startsWith(String path) : 判断是否以path 路径开始
Ø boolean isAbsolute() : 判断是否是绝对路径
Ø Path getFileName() : 返回与调用Path 对象关联的文件名
Ø Path getName(int idx) : 返回的指定索引位置idx 的路径名称
Ø int getNameCount() : 返回Path 根目录后面元素的数量
Ø Path getParent() :返回Path对象包含整个路径,不包含Path 对象指定的文件路径
Ø Path getRoot() :返回调用Path 对象的根路径
Ø Path resolve(Path p) :将相对路径解析为绝对路径
Ø Path toAbsolutePath() : 作为绝对路径返回调用Path 对象
Ø String toString() :返回调用Path 对象的字符串表示形式
7.2.Files 类
java.nio.file.Files 用于操作文件或目录的工具类。
Files常用方法:
Ø Path copy(Path src, Path dest, CopyOption … how) : 文件的复制
Ø Path createDirectory(Path path, FileAttribute<?> … attr) : 创建一个目录
Ø Path createFile(Path path, FileAttribute<?> … arr) : 创建一个文件
Ø void delete(Path path) : 删除一个文件
Ø Path move(Path src, Path dest, CopyOption…how) : 将src 移动到dest 位置
Ø long size(Path path) : 返回path 指定文件的大小
Files常用方法:用于判断
Ø boolean exists(Path path, LinkOption … opts) : 判断文件是否存在
Ø boolean isDirectory(Path path, LinkOption … opts) : 判断是否是目录
Ø boolean isExecutable(Path path) : 判断是否是可执行文件
Ø boolean isHidden(Path path) : 判断是否是隐藏文件
Ø boolean isReadable(Path path) : 判断文件是否可读
Ø boolean isWritable(Path path) : 判断文件是否可写
Ø boolean notExists(Path path, LinkOption … opts) : 判断文件是否不存在
Ø public static <A extends BasicFileAttributes> A readAttributes(Path path,Class<A> type,LinkOption... options) : 获取与path 指定的文件相关联的属性。
Files常用方法:用于操作内容
ØSeekableByteChannel newByteChannel(Path path, OpenOption…how) : 获取与指定文件的连接,
指定打开方式。
Ø DirectoryStream newDirectoryStream(Path path) : 打开path 指定的目录
Ø InputStream newInputStream(Path path, OpenOption…how):获取InputStream 对象
Ø OutputStream newOutputStream(Path path, OpenOption…how) : 获取OutputStream 对象
7.3.自动资源管理
Java 7 增加了一个新特性,该特性提供了另外一种管理资源的方式,这种方式能自动关闭文件。这个特性有时被称为自动资源管理(Automatic Resource Management, ARM),该特性以try 语句的扩展版为基础。自动资源管理主要用于,当不再需要文件(或其他资源)时,可以防止无意中忘记释放它们。
自动资源管理基于try 语句的扩展形式:
try(需要关闭的资源声明){ //可能发生异常的语句 }catch(异常类型变量名){ //异常的处理语句 } …… finally{ //一定执行的语句 }
当try 代码块结束时,自动释放资源。因此不需要显示的调用close() 方法。该形式也称为“带资源的 try 语句”。注意:
①try 语句中声明的资源被隐式声明为final ,资源的作用局限于带资源的try 语句
②可以在一条 try 语句中管理多个资源,每个资源以“;” 隔开即可。
③需要关闭的资源,必须实现了 AutoCloseable 接口或其自接口Closeable
package com.atguigu.nio; import java.io.IOException; import java.nio.ByteBuffer; import java.nio.channels.FileChannel; import java.nio.channels.SeekableByteChannel; import java.nio.file.DirectoryStream; import java.nio.file.Files; import java.nio.file.LinkOption; import java.nio.file.Path; import java.nio.file.Paths; import java.nio.file.StandardCopyOption; import java.nio.file.StandardOpenOption; import java.nio.file.attribute.BasicFileAttributes; import java.nio.file.attribute.DosFileAttributeView; import org.junit.Test; public class TestNIO_2 { //自动资源管理:自动关闭实现 AutoCloseable 接口的资源 @Test public void test8(){ try(FileChannel inChannel = FileChannel.open(Paths.get("1.jpg"), StandardOpenOption.READ); FileChannel outChannel = FileChannel.open(Paths.get("2.jpg"), StandardOpenOption.WRITE, StandardOpenOption.CREATE)){ ByteBuffer buf = ByteBuffer.allocate(1024); inChannel.read(buf); }catch(IOException e){ } } /* Files常用方法:用于操作内容 SeekableByteChannel newByteChannel(Path path, OpenOption…how) : 获取与指定文件的连接,how 指定打开方式。 DirectoryStream newDirectoryStream(Path path) : 打开 path 指定的目录 InputStream newInputStream(Path path, OpenOption…how):获取 InputStream 对象 OutputStream newOutputStream(Path path, OpenOption…how) : 获取 OutputStream 对象 */ @Test public void test7() throws IOException{ SeekableByteChannel newByteChannel = Files.newByteChannel(Paths.get("1.jpg"), StandardOpenOption.READ); DirectoryStream<Path> newDirectoryStream = Files.newDirectoryStream(Paths.get("e:/")); for (Path path : newDirectoryStream) { System.out.println(path); } } /* Files常用方法:用于判断 boolean exists(Path path, LinkOption … opts) : 判断文件是否存在 boolean isDirectory(Path path, LinkOption … opts) : 判断是否是目录 boolean isExecutable(Path path) : 判断是否是可执行文件 boolean isHidden(Path path) : 判断是否是隐藏文件 boolean isReadable(Path path) : 判断文件是否可读 boolean isWritable(Path path) : 判断文件是否可写 boolean notExists(Path path, LinkOption … opts) : 判断文件是否不存在 public static <A extends BasicFileAttributes> A readAttributes(Path path,Class<A> type,LinkOption... options) : 获取与 path 指定的文件相关联的属性。 */ @Test public void test6() throws IOException{ Path path = Paths.get("e:/nio/hello7.txt"); // System.out.println(Files.exists(path, LinkOption.NOFOLLOW_LINKS)); BasicFileAttributes readAttributes = Files.readAttributes(path, BasicFileAttributes.class, LinkOption.NOFOLLOW_LINKS); System.out.println(readAttributes.creationTime()); System.out.println(readAttributes.lastModifiedTime()); DosFileAttributeView fileAttributeView = Files.getFileAttributeView(path, DosFileAttributeView.class, LinkOption.NOFOLLOW_LINKS); fileAttributeView.setHidden(false); } /* Files常用方法: Path copy(Path src, Path dest, CopyOption … how) : 文件的复制 Path createDirectory(Path path, FileAttribute<?> … attr) : 创建一个目录 Path createFile(Path path, FileAttribute<?> … arr) : 创建一个文件 void delete(Path path) : 删除一个文件 Path move(Path src, Path dest, CopyOption…how) : 将 src 移动到 dest 位置 long size(Path path) : 返回 path 指定文件的大小 */ @Test public void test5() throws IOException{ Path path1 = Paths.get("e:/nio/hello2.txt"); Path path2 = Paths.get("e:/nio/hello7.txt"); System.out.println(Files.size(path2)); // Files.move(path1, path2, StandardCopyOption.ATOMIC_MOVE); } @Test public void test4() throws IOException{ Path dir = Paths.get("e:/nio/nio2"); // Files.createDirectory(dir); Path file = Paths.get("e:/nio/nio2/hello3.txt"); // Files.createFile(file); Files.deleteIfExists(file); } @Test public void test3() throws IOException{ Path path1 = Paths.get("e:/nio/hello.txt"); Path path2 = Paths.get("e:/nio/hello2.txt"); Files.copy(path1, path2, StandardCopyOption.REPLACE_EXISTING); } /* Paths 提供的 get() 方法用来获取 Path 对象: Path get(String first, String … more) : 用于将多个字符串串连成路径。 Path 常用方法: boolean endsWith(String path) : 判断是否以 path 路径结束 boolean startsWith(String path) : 判断是否以 path 路径开始 boolean isAbsolute() : 判断是否是绝对路径 Path getFileName() : 返回与调用 Path 对象关联的文件名 Path getName(int idx) : 返回的指定索引位置 idx 的路径名称 int getNameCount() : 返回Path 根目录后面元素的数量 Path getParent() :返回Path对象包含整个路径,不包含 Path 对象指定的文件路径 Path getRoot() :返回调用 Path 对象的根路径 Path resolve(Path p) :将相对路径解析为绝对路径 Path toAbsolutePath() : 作为绝对路径返回调用 Path 对象 String toString() : 返回调用 Path 对象的字符串表示形式 */ @Test public void test2(){ Path path = Paths.get("e:/nio/hello.txt"); System.out.println(path.getParent()); System.out.println(path.getRoot()); // Path newPath = path.resolve("e:/hello.txt"); // System.out.println(newPath); Path path2 = Paths.get("1.jpg"); Path newPath = path2.toAbsolutePath(); System.out.println(newPath); System.out.println(path.toString()); } @Test public void test1(){ Path path = Paths.get("e:/", "nio/hello.txt"); System.out.println(path.endsWith("hello.txt")); System.out.println(path.startsWith("e:/")); System.out.println(path.isAbsolute()); System.out.println(path.getFileName()); for (int i = 0; i < path.getNameCount(); i++) { System.out.println(path.getName(i)); } } }