使用iTerm2和OhMyZsh实现一个强大终端

最新推荐文章于 2024-04-12 08:29:54 发布

INC随我

最新推荐文章于 2024-04-12 08:29:54 发布

阅读量1.2k

点赞数 1

文章标签： Terminal

本文链接：https://blog.csdn.net/qq_38542085/article/details/106322654

版权

参考文章：
https://blog.csdn.net/qianghaohao/article/details/79440961
https://www.jianshu.com/p/9c3439cc3bdb
https://www.jianshu.com/p/d194d29e488c?open_source=weibo_search
https://www.jianshu.com/p/a78845c3f476

首先我们看一下最终效果

一、下载iTerm2

官网下载地址：https://www.iterm2.com/

二、安装`zsh`

zsh一般Mac已经自带了，无需额外安装。可以用cat /etc/shells查看zsh是否安装，如果列出了/bin/zsh则表明zsh已经安装了。
接下来修改iTerm2终端的默认Shell，可以用echo $SHELL查看当前Shell是什么，如果不是/bin/zsh则用如下命令修改iTerm2的默认Shell为zsh

chsh -s /bin/bash

这个是默认的样子
在这里插入图片描述

三、使用`Oh my zsh`

zsh的功能极其强大，只是配置过于复杂，起初只有极客才在用。后来，有个穷极无聊的程序员可能是实在看不下去广大猿友一直只能使用单调的bash, 于是他创建了一个名为oh-my-zsh的开源项目

1.安装Oh my zsh

# curl 安装方式
sh -c "$(curl -fsSL https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)"

# wget 安装方式
sh -c "$(wget https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh -O -)"

在安装过程中我们发现总是出现无法下载instal.sh文件的情况，所以下面是install.sh文件的源码

main() {
  # Use colors, but only if connected to a terminal, and that terminal
  # supports them.
  if which tput >/dev/null 2>&1; then
      ncolors=$(tput colors)
  fi
  if [ -t 1 ] && [ -n "$ncolors" ] && [ "$ncolors" -ge 8 ]; then
    RED="$(tput setaf 1)"
    GREEN="$(tput setaf 2)"
    YELLOW="$(tput setaf 3)"
    BLUE="$(tput setaf 4)"
    BOLD="$(tput bold)"
    NORMAL="$(tput sgr0)"
  else
    RED=""
    GREEN=""
    YELLOW=""
    BLUE=""
    BOLD=""
    NORMAL=""
  fi

  # Only enable exit-on-error after the non-critical colorization stuff,
  # which may fail on systems lacking tput or terminfo
  set -e

  CHECK_ZSH_INSTALLED=$(grep /zsh$ /etc/shells | wc -l)
  if [ ! $CHECK_ZSH_INSTALLED -ge 1 ]; then
    printf "${YELLOW}Zsh is not installed!${NORMAL} Please install zsh first!\n"
    exit
  fi
  unset CHECK_ZSH_INSTALLED

  if [ ! -n "$ZSH" ]; then
    ZSH=~/.oh-my-zsh
  fi

  if [ -d "$ZSH" ]; then
    printf "${YELLOW}You already have Oh My Zsh installed.${NORMAL}\n"
    printf "You'll need to remove $ZSH if you want to re-install.\n"
    exit
  fi

  # Prevent the cloned repository from having insecure permissions. Failing to do
  # so causes compinit() calls to fail with "command not found: compdef" errors
  # for users with insecure umasks (e.g., "002", allowing group writability). Note
  # that this will be ignored under Cygwin by default, as Windows ACLs take
  # precedence over umasks except for filesystems mounted with option "noacl".
  umask g-w,o-w

  printf "${BLUE}Cloning Oh My Zsh...${NORMAL}\n"
  hash git >/dev/null 2>&1 || {
    echo "Error: git is not installed"
    exit 1
  }
  # The Windows (MSYS) Git is not compatible with normal use on cygwin
  if [ "$OSTYPE" = cygwin ]; then
    if git --version | grep msysgit > /dev/null; then
      echo "Error: Windows/MSYS Git is not supported on Cygwin"
      echo "Error: Make sure the Cygwin git package is installed and is first on the path"
      exit 1
    fi
  fi
  env git clone --depth=1 https://github.com/robbyrussell/oh-my-zsh.git $ZSH || {
    printf "Error: git clone of oh-my-zsh repo failed\n"
    exit 1
  }

  printf "${BLUE}Looking for an existing zsh config...${NORMAL}\n"
  if [ -f ~/.zshrc ] || [ -h ~/.zshrc ]; then
    printf "${YELLOW}Found ~/.zshrc.${NORMAL} ${GREEN}Backing up to ~/.zshrc.pre-oh-my-zsh${NORMAL}\n";
    mv ~/.zshrc ~/.zshrc.pre-oh-my-zsh;
  fi

  printf "${BLUE}Using the Oh My Zsh template file and adding it to ~/.zshrc${NORMAL}\n"
  cp $ZSH/templates/zshrc.zsh-template ~/.zshrc
  sed "/^export ZSH=/ c\\
  export ZSH=$ZSH
  " ~/.zshrc > ~/.zshrc-omztemp
  mv -f ~/.zshrc-omztemp ~/.zshrc

  # If this user's login shell is not already "zsh", attempt to switch.
  TEST_CURRENT_SHELL=$(expr "$SHELL" : '.*/\(.*\)')
  if [ "$TEST_CURRENT_SHELL" != "zsh" ]; then
    # If this platform provides a "chsh" command (not Cygwin), do it, man!
    if hash chsh >/dev/null 2>&1; then
      printf "${BLUE}Time to change your default shell to zsh!${NORMAL}\n"
      chsh -s $(grep /zsh$ /etc/shells | tail -1)
    # Else, suggest the user do so manually.
    else
      printf "I can't change your shell automatically because this system does not have chsh.\n"
      printf "${BLUE}Please manually change your default shell to zsh!${NORMAL}\n"
    fi
  fi

  printf "${GREEN}"
  echo '         __                                     __   '
  echo '  ____  / /_     ____ ___  __  __   ____  _____/ /_  '
  echo ' / __ \/ __ \   / __ `__ \/ / / /  /_  / / ___/ __ \ '
  echo '/ /_/ / / / /  / / / / / / /_/ /    / /_(__  ) / / / '
  echo '\____/_/ /_/  /_/ /_/ /_/\__, /    /___/____/_/ /_/  '
  echo '                        /____/                       ....is now installed!'
  echo ''
  echo ''
  echo 'Please look over the ~/.zshrc file to select plugins, themes, and options.'
  echo ''
  echo 'p.s. Follow us at https://twitter.com/ohmyzsh.'
  echo ''
  echo 'p.p.s. Get stickers and t-shirts at https://shop.planetargon.com.'
  echo ''
  printf "${NORMAL}"
  env zsh
}

main

之后执行

sh -c "$(curl -fsSL install.sh)"

2.修改主题

下面我们进行主题修改，主题简介链接：https://github.com/robbyrussell/oh-my-zsh/wiki/themes

（1）打开配置文件

vi ~/.zshrc

（2）主题换成自己喜爱的主题

ZSH_THEME="agnoster"

（3）更新配置

source ~/.zshrc

四、安装PowerFonts字体

有的同学会发现，执行完上一步后，使用可能会出现乱码，这是因为我们缺少PowerFonts字体
安装字体库需要首先将项目clone至本地，然后执行源码中的install.sh。

git clone git@github.com:powerline/fonts.git
cd fonts
./install.sh

安装好字体库之后，我们来设置iTerm2的字体，具体的操作是iTerm2 -> Preferences -> Profiles -> Text，在Font区域选中Change Font，然后找到Roboto Mono for Powerline字体。

五、安装配色方案

配色链接：https://github.com/mbadolato/iTerm2-Color-Schemes

配色方案在使用VIM或Colorful Log时会变得非常有用，同时界面也不会一片黑绿一样死板。

1.git clone的方式下载源码进行安装：

cd ~/Desktop/OpenSource
git clone https://github.com/altercation/solarized
cd solarized/iterm2-colors-solarized/
open .

在打开的finder窗口中，双击Solarized Dark.itermcolors和Solarized Light.itermcolors安装明暗两种配色
进入iTerm2 -> Preferences -> Profiles -> Colors -> Color Presets
根据个人喜好选择solarized dark和solarized light两种配色中的一种即可。

2.手动安装

但是下面这个是我最喜欢的配色

https://github.com/mbadolato/iTerm2-Color-Schemes/blob/master/schemes/Solarized%20Dark%20Higher%20Contrast.itermcolors

将该配色方案文件（Solarized Dark Higher Contrast.itermcolors）复制出来，保存到本地，文件命名为 SolarizedDarkHigherContrast.itermcolors，然后双击即可安装。

六、增加高亮

这是oh my zsh的一个插件，安装方式与theme大同小异：

cd ~/.oh-my-zsh/custom/plugins/
git clone https://github.com/zsh-users/zsh-syntax-highlighting.git
vi ~/.zshrc

1.添加plugins

这时我们再次打开zshrc文件进行编辑。找到plugins，此时plugins中应该已经有了git，我们需要把高亮插件也加上：

plugins=(git)

plugins=(
git
zsh-syntax-highlighting
zsh-autosuggestions
)

请务必保证插件顺序，zsh-syntax-highlighting必须在最后一个。

2.文件的最后一行添加

source ~/.oh-my-zsh/custom/plugins/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh

3.修改生效：

source ~/.zshrc

七、安装命令补全

跟代码高亮的安装方式一样，这也是一个zsh的插件，叫做zsh-autosuggestion，用于命令建议和补全。

cd ~/.oh-my-zsh/custom/plugins/
git clone https://github.com/zsh-users/zsh-autosuggestions
vi ~/.zshrc

之后将插件加入zsh配置与上一个一致

八、使用技巧

参考文章：https://www.jianshu.com/p/a78845c3f476

INC随我

关注

1
点赞
踩
4

收藏

觉得还不错? 一键收藏
0
评论
使用iTerm2和OhMyZsh实现一个强大终端

参考文章：https://blog.csdn.net/qianghaohao/article/details/79440961https://www.jianshu.com/p/9c3439cc3bdbhttps://www.jianshu.com/p/d194d29e488c?open_source=weibo_searchhttps://www.jianshu.com/p/a78845c3f476首先我们看一下最终效果一、下载iTerm2官网下载地址：https://www.iterm
复制链接

扫一扫