Reasons and treatment methods for the liquefied gas stove not to catch fire

Reasons and treatment methods for the liquefied gas stove not to catch fire:
　　When you want to cook, you suddenly find that the gas stove can’t catch fire. Do you feel very distressed? Many people have encountered this kind of thing in their lives. How to solve the problem that the gas stove can’t catch fire? People are more concerned about the problem, let’s take a look at the causes and treatment methods of the liquefied gas stove failing to fire.
　　

1. Overvoltage protection
　　Many stoves have an over-voltage protection function, and will not start once over-voltage.
　　Solution: If the cooker is over-pressure protected, try a pressure reducing valve at this time.
　　2. The micro switch is damaged
　　At this time, there is a small place in the stove, but it is more difficult to repair than usual. Generally speaking, it is not recommended that the owner repair it by himself.
　　Solution: The micro switch of the stove is damaged. This is a delicate and professional job. It is best to ask a professional to solve it.
　　3. No gas
　　If you can’t catch a fire, first check if there is still gas.
　　Solution: If the bottled gas is out of gas, add gas; if it is pipeline gas, make sure the gas valve switch is turned on.
　　4. The battery is dead
　　If there is no fire and no sound of clicking, check whether the battery is charged.
　　Solution: If the stove battery is empty or exhausted, just replace the ordinary AA battery.
　　5. Poor circuit contact
　　However, it is often encountered by many old users, mainly to check whether the positive and negative poles of the battery box are rusted, and whether the wiring is poorly connected.
　　Solution: If the electrical connection of the stove is poor, remove the rust and connect the wiring accurately.
　　6. the ignition needle is dirty
　　The kitchen is a place that is easy to get dirty, especially easy to be contaminated with oil, etc. If the stove is left for too long, the ignition needle is easy to get dirty with oil.
　　Solution: At this time, you need to clean the grease on the ignition needle, and then try to ignite.
　　7. the pipeline is blocked
　　Once the pipeline is blocked, it is necessary to check the gas outlet valve. Generally speaking, if the gas can be smelled but the stove cannot be on fire, it is likely that the gas is blocked.
　　Solution: The stove pipe is blocked, then the pipe must be unblocked or replaced.
　　The above is the related content of “Liquefied gas stove cannot catch fire and how to deal with it”, I hope it can be helpful to everyone!
　　Related Reading:
　　The safety aspects of liquefied gas cylinders
　　How to distinguish regular liquefied gas cylinders
　　What to do if the firepower of the liquefied gas stove is low