Flume之旅
Flume概述
-
flume官网地址:
http://flume.apache.org
-
flume架构
source:数据源 产生数据流,同时source将产生的数据流传输到channel channel:传输通道 用于桥接source和sinks sinks:下沉 从channel收集数据 event:传输单元 Flume数据传输的基本单元,以时间的形式将数据送往目的地
Flume架构图:
Flume安装部署
-
下载安装包
- http://archive.apache.org/dist/flume/1.6.0/dsa 解压
- tar -zxvf ~.tar.gz 重命名
- mv flume-env.sh.template flume-env.sh 修改配置文件
- export JAVA_HOME=/usr/local/jdk
Flume监听端口
-
安装telnet
- yum search telnet
- yum install telnet.x86_64
写配置文件(flumejob_telnet.conf)
#smple.conf: A single-node Flume configuration
# Name the components on this agent 定义变量方便调用 加s可以有多个此角色
a1.sources = r1
a1.sinks = k1
a1.channels = c1
# Describe/configure the source 描述source角色 进行内容定制
# 此配置属于tcp source 必须是netcat类型
a1.sources.r1.type = netcat
a1.sources.r1.bind = localhost
a1.sources.r1.port = 44444
# Describe the sink 输出日志文件
a1.sinks.k1.type = logger
# Use a channel which buffers events in memory(file)使用内存 总大小1000 每次传输100
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100
# Bind the source and sink to the channel 一个source可以绑定多个channel
# 一个sinks可以只能绑定一个channel 使用的是图二的模型
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1
启动命令
./flume-ng agent -c /usr/local/flume/conf -f /usr/local/flume/conf/flumejob_telnet.conf -n a1 -Dflume.root.logger=INFO,console
-
发送数据
- telnet localhost 44444
- 查看
实时的采集文件到HDFS
写配置文件(flumejob_hdfs.conf):
# Name the components on this agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1
# Describe/configure the source
# exec 执行一个命令的方式去查看文件 tail -F 实时查看
a1.sources.r1.type = exec
# 要执行的脚本command tail -F 默认10行 man tail 查看帮助 tail -F /目录/日志文件
a1.sources.r1.command = tail -F /
# 执行这个command使用的是哪个脚本 -c 指定使用什么命令
# whereis bash
# bash: /usr/bin/bash /usr/share/man/man1/bash.1.gz
a1.sources.r1.shell = /usr/bin/bash -c
# Describe the sink
a1.sinks.k1.type = hdfs
a1.sinks.k1.hdfs.path = hdfs://hadoop01:9000/flume/%Y%m%d/%H
#上传文件的前缀
a1.sinks.k1.hdfs.filePrefix = logs-
#是否按照时间滚动文件夹
a1.sinks.k1.hdfs.round = true
#多少时间单位创建一个新的文件夹 秒 (默认30s)
a1.sinks.k1.hdfs.roundValue = 1
#重新定义时间单位(每小时滚动一个文件夹)
a1.sinks.k1.hdfs.roundUnit = minute
#是否使用本地时间戳
a1.sinks.k1.hdfs.useLocalTimeStamp = true
#积攒多少个 Event 才 flush 到 HDFS 一次
a1.sinks.k1.hdfs.batchSize = 500
#设置文件类型,可支持压缩
a1.sinks.k1.hdfs.fileType = DataStream
#多久生成一个新的文件 秒
a1.sinks.k1.hdfs.rollInterval = 30
#设置每个文件的滚动大小 字节(最好128M)
a1.sinks.k1.hdfs.rollSize = 134217700
#文件的滚动与 Event 数量无关
a1.sinks.k1.hdfs.rollCount = 0
#最小冗余数(备份数 生成滚动功能则生效roll hadoop本身有此功能 无需配置) 1份 不冗余
a1.sinks.k1.hdfs.minBlockReplicas = 1
# Use a channel which buffers events in memory
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100
# Bind the source and sink to the channel
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1
-
上传
- 将配置文件上传到flume/conf/下
启动命令:
bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/flumejob_hdfs.conf
实时监听文件夹
写配置文件(flumejob_dir.conf)
# 定义
a1.sources = r1
a1.sinks = k1
a1.channels = c1
# Describe/configure the source
a1.sources.r1.type = spooldir
# 监控的文件夹
a1.sources.r1.spoolDir = /root/spooldir
# 上传成功后显示后缀名
a1.sources.r1.fileSuffix = .COMPLETED
# 如论如何 加绝对路径的文件名 默认false
a1.sources.r1.fileHeader = true
#忽略所有以.tmp 结尾的文件(正在被写入),不上传
# ^以任何开头 出现无限次 以.tmp结尾的
a1.sources.r1.ignorePattern = ([^ ]*\.tmp)
# Describe the sink
a1.sinks.k1.type = hdfs
a1.sinks.k1.hdfs.path = hdfs://hadoop01:9000/flume/spooldir/%Y%m%d/%H
#上传文件的前缀
a1.sinks.k1.hdfs.filePrefix = spooldir-
#是否按照时间滚动文件夹
a1.sinks.k1.hdfs.round = true
#多少时间单位创建一个新的文件夹
a1.sinks.k1.hdfs.roundValue = 1
#重新定义时间单位
a1.sinks.k1.hdfs.roundUnit = hour
#是否使用本地时间戳
a1.sinks.k1.hdfs.useLocalTimeStamp = true
#积攒多少个 Event 才 flush 到 HDFS 一次
a1.sinks.k1.hdfs.batchSize = 50
#设置文件类型,可支持压缩
a1.sinks.k1.hdfs.fileType = DataStream
#多久生成一个新的文件
a1.sinks.k1.hdfs.rollInterval = 600
#设置每个文件的滚动大小大概是 128M
a1.sinks.k1.hdfs.rollSize = 134217700
#文件的滚动与 Event 数量无关
a1.sinks.k1.hdfs.rollCount = 0
#最小副本数
a1.sinks.k1.hdfs.minBlockReplicas = 1
# Use a channel which buffers events in memory
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100
# Bind the source and sink to the channel
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1
-
上传
- 将配置文件上传到flume/conf/下 创建需要指定的文件夹
- mkdir /root/spooldir
启动命令:
bin/flume-ng agent --conf conf/ --name a1 --conf-file conf/flumejob_dir.conf