[ubuntu 18.04 + GTX1050] Anaconda3 - 5.2.0 + CUDA10.0 + cuDNN 7.4.1 + bazel 0.17 + tensorRT 5 + Ten

转载：https://www.cnblogs.com/shiyublog/p/10011803.html

虽然CUDA官网中没有RTX20系列GPU所对应的版本，但是CUDA 10.0 支持Ubuntu18.04 + GPU GEFORCE RTX 2070。为了方便之后学习研究，需要配置：

Anaconda3 5.2.0
CUDA 10.0
cuDNN 7.4.1
Bazel 0.17
TensorRT 5
Tensorflow-gpu
（以下为本人配置方法，由于配置过程中有过错误并重试等情况，以下内容如有错误还请指正~）

（上面列出的各版本都是支持ubuntu18.04 和 RTX 2070的，大家也可以直接参照以上列表，自行安装~）

（安装NVIDIA驱动的方法参考：https://blog.csdn.net/ghw15221836342/article/details/79571559 方法一中，把390替换为410即为RTX 2070 对应版本。）

---

Top
Ubuntu 18 安装Anaconda3 - 5.2.0
因为tensorflow支持python3.4, 3.5, 3.6,可能还未支持python3.7（python目前最高版本3.7.1 与anaconda3 对应最高python版本3.7.0），为了方便起见，选择安装Anaconda3 - 5.2.0，其对应的python版本为3.6.4. 安装了Anaconda之后，不需要再单独安装python及其各种库了。

anaconda各版本的archive:

https://repo.anaconda.com/archive/

选择下载 Anaconda3-5.2.0-Linux-x86_64.sh

之后到下载目录，

bash Anaconda3-5.2.0-Linux-x86_64.sh
可以通过查看

python --version
显示

Python 3.6.5 :: Anaconda, Inc.
表示安装成功。

查看pip版本：

$ pip --version
pip 10.0.1 from /home/lsy/anaconda3/lib/python3.6/site-packages/pip (python 3.6)
--------------（若完成以上，则无需进行下面的安装python的操作了）--------------------------------------------

Ubuntu 18 安装 python 3.6

sudo add-apt-repository ppa:jonathonf/python-3.6

Ubuntu 18 安装 python3.7.1

安装过程参考：

https://blog.csdn.net/jaket5219999/article/details/80894517

wget https://www.python.org/ftp/python/3.7.1/Python-3.7.1.tar.xz && \

 tar -xvf Python-3.7.1.tar.xz && \
    cd Python-3.7.1 && \
    ./configure && make && sudo make altinstall

从官网下载https://www.python.org/downloads/release/python-370/

解压并打开指定目录

./configure && make && sudo make altinstall
报错 zipimport.ZipImportError: can‘t decompress data; zlib not available

解决方法：

sudo apt-get install -y make build-essential libssl-dev zlib1g-dev libbz2-dev \
libreadline-dev libsqlite3-dev wget curl llvm libncurses5-dev libncursesw5-dev \
xz-utils tk-dev

python2,python3版本切换

参考：https://stackoverflow.com/questions/43743509/how-to-make-python3-command-run-python-3-6-instead-of-3-5

复制代码

实现 python 链接 python3.6

rm /usr/bin/python
ln -s /usr/bin/python3.6 /usr/bin/python

实现 python2 链接 Python2.7

rm /usr/bin/python2
ln -s /usr/bin/python2.7 /usr/bin/python2

创建 alias

alias python='/usr/bin/python3.6'
~/.bash_aliases

复制代码
pip安装

sudo apt-get install python3-pip
这里要用python3，否则匹配的是默认的python2。

---

Top
CUDA 10.0
参考：

https://medium.com/@vitali.usau/install-cuda-10-0-cudnn-7-3-and-build-tensorflow-gpu-from-source-on-ubuntu-18-04-3daf720b83fe

1. 下载CUDA Toolkit : Linux / x86_64 / Ubuntu / 18.04 /deb (local)

https://developer.nvidia.com/cuda-downloads

2. 安装

   sudo dpkg -i cuda-repo-ubuntu1804–10–0-local-10.0.130–410.48_1.0–1_amd64.deb
   sudo apt-key add /var/cuda-repo-10–0-local-10.0.130–410.48/7fa2af80.pub
   sudo apt-get update
   sudo apt-get install cuda

3. 添加环境变量

   nano ~/.bashrc

末行添加并保存退出。

export PATH=/usr/local/cuda-10.0/bin${PATH:+:${PATH}} 

4. 检查驱动版本和CUDA toolkit

   cat /proc/driver/nvidia/version
   nvcc -V
   5. (Optional) Build CUDA samples and run it.

   cd /usr/local/cuda-10.0/samples
   sudo make

这需要等一段时间。完成后，可以进入资源中，执行命令查看结果。

cd /usr/local/cuda-10.0/samples/bin/x86_64/linux/release
./deviceQuery
./bandwidthTest

---

Top
cuDNN v7.4.1 for CUDA 10.0

1. 下载cuDNN Library for Linux

https://developer.nvidia.com/rdp/cudnn-download

（下载前需要在NVIDIA注册账号：https://developer.nvidia.com/）

2. 解压下载好的文件，解压后cuDNN的文件夹名称为cuda

3. 将cuDNN内容复制到CUDA安装文件中，即将cuDNN解压后的cuda文件中内容复制到/usr/local的CUDA中。

   $ sudo cp cuda/include/cudnn.h /usr/local/cuda/include
   $ sudo cp cuda/lib64/libcudnn* /usr/local/cuda/lib64
   $ sudo chmod a+r /usr/local/cuda/include/cudnn.h /usr/local/cuda/lib64/libcudnn*

（该方法参考：https://blog.csdn.net/u010801439/article/details/80483036）

---

Top
NCCL v2.3.7
安装方法参考：https://blog.csdn.net/zuyuhuo6777/article/details/81450258

1. 下载

https://developer.nvidia.com/nccl/nccl-download

选择Local installers (x86)中的Local installer for Ubuntu 18.04
2. 安装
进入下载目录，安装本地NCCL存储库，更新APY数据库，安装libnccl2与APT打包。此外，若需要使用NCCL编译应用程序，则可以安装libnccl-dev的包裹。

$ sudo dpkg -i nccl-repo-ubuntu1804-2.3.7-ga-cuda10.0_1-1_amd64.deb 
$ sudo apt update

$ sudo apt install libnccl2 libnccl-dev

方便起见，请直接下载Bazel 0.17

（早先安装了0.19，–config == cuda 并不支持0.17以上版本，不清楚使用0.19对后续步骤有无影响，所以，卸载了0.19，重新安装了0.17。卸载方法：whereis bazel,找到bazel目录，直接rm -rf 即可。）

Top
Bazel 0.19.2
官网提供了多种安装方法，

https://docs.bazel.build/versions/master/install-ubuntu.html#install-with-installer-ubuntu

以下使用了Installing using binary installer的方法。

1. 下载需要的包

   $ sudo apt-get install pkg-config zip g++ zlib1g-dev unzip python

2. 下载Bazel

https://github.com/bazelbuild/bazel/releases

选择安装了bazel-0.19.2-installer-linux-x86_64.sh

3. Run the installer

   $ chmod +x bazel--installer-linux-x86_64.sh
   $ ./bazel--installer-linux-x86_64.sh --user

4. 设置环境

   $ nano ~/.bashrc

末行添加并保存退出

export PATH="$PATH:$HOME/bin"

执行以生效：

$ source ~/.bashrc

5. 检查是否安装成功

   $ bazel version

---

Top
TensotRT 5.0.2.6
for Ubuntu 1804 and CUDA 10.0

1. 下载

https://developer.nvidia.com/nvidia-tensorrt-5x-download

选择了Debian and RPM Install Package:

TensorRT 5.0.2.6 GA for Ubuntu 1804 and CUDA 10.0 DEB local repo packages

2. 安装，参考官方文档：

https://docs.nvidia.com/deeplearning/sdk/tensorrt-install-guide/index.html#downloading

$ sudo dpkg -i nv-tensorrt-repo-ubuntu1804-cuda10.0-trt5.0.2.6-ga-20181009_1-1_amd64.deb 
$ sudo apt-key add /var/nv-tensorrt-repo-cuda10.0-trt5.0.2.6-ga-20181009/7fa2af80.pub 
$ sudo apt-get update
$ sudo apt-get install tensorrt

之前Anaconda3 中python是3.6版本，下面直接写python就好，不用改为python3.

$ sudo apt-get install python-libnvinfer-dev
安装后显示：

Setting up python-libnvinfer-dev (5.0.2-1+cuda10.0) ...

若计划通过tensorflow使用tensorRT

$ sudo apt-get install uff-converter-tf

安装后显示：

Setting up graphsurgeon-tf (5.0.2-1+cuda10.0) ...
Setting up uff-converter-tf (5.0.2-1+cuda10.0) ...

3. 检查我们的安装结果：

复制代码

$ dpkg -l | grep TensorRT
ii  graphsurgeon-tf                                             5.0.2-1+cuda10.0                    amd64        GraphSurgeon for TensorRT package
ii  libnvinfer-dev                                              5.0.2-1+cuda10.0                    amd64        TensorRT development libraries and headers
ii  libnvinfer-samples                                          5.0.2-1+cuda10.0                    all          TensorRT samples and documentation
ii  libnvinfer5                                                 5.0.2-1+cuda10.0                    amd64        TensorRT runtime libraries
ii  python-libnvinfer                                           5.0.2-1+cuda10.0                    amd64        Python bindings for TensorRT
ii  python-libnvinfer-dev                                       5.0.2-1+cuda10.0                    amd64        Python development package for TensorRT
ii  tensorrt                                                    5.0.2.6-1+cuda10.0                  amd64        Meta package of TensorRT
ii  uff-converter-tf                                            5.0.2-1+cuda10.0                    amd64        UFF converter for TensorRT package

复制代码

Top
Tensorflow
推荐两种安装方式：1.在docker中安装；2. 在virtualenv中安装

（1）docker中：

1. Docker的安装：

https://www.digitalocean.com/community/tutorials/how-to-install-and-use-docker-on-ubuntu-18-04

2. Install nvidia-docker：

https://github.com/NVIDIA/nvidia-docker

3. Downloads TensorFlow release images to your machine:

$ docker pull tensorflow/tensorflow:latest-devel-gpu
（2）virtualenv中：

sudo apt update
sudo apt install python-dev python-pip
sudo pip install -U virtualenv  # system-wide install
virtualenv --system-site-packages -p python3 ./venv
source ./venv/bin/activate
(venv) $ pip install --upgrade pip
(venv) $ pip list

在(venv)中继续安装tensorflow.(然而本人直接装到了系统里…允悲)

(1) Installed by pip:

pip install tensorflow-gpu==1.12

ImportError: libcublas.so.9.0: cannot open shared object file: No such file or directory

Solution: add the following to .bashrc

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/cuda/lib64/
(2) Else: Build from source

这里注意./configure时候，默认cuda版本是9.0，我们改为 10.0.

安装完毕后可以退出venv:

(venv) $ deactivate # don’t exit until you’re done using TensorFlow

Top
测试tensorflow-gpu是否能顺利运行：

sudo docker run --runtime=nvidia -it --rm tensorflow/tensorflow:latest-gpu \
 python -c "import tensorflow as tf; tf.enable_eager_execution(); print(tf.reduce_sum(tf.random_normal([1000, 1000])))"



[sudo] password for lsy: 
Unable to find image 'tensorflow/tensorflow:latest-gpu' locally
latest-gpu: Pulling from tensorflow/tensorflow
18d680d61657: Already exists 
0addb6fece63: Already exists 
78e58219b215: Already exists 
eb6959a66df2: Already exists 
e3eb30fe4844: Already exists 
852c9b7a4425: Already exists 
0a298bf31111: Already exists 
4b34ad03a386: Pull complete 
ea4e8d636cf7: Pull complete 
e641906af026: Pull complete 
af41a77e326c: Pull complete 
56234dc44f16: Pull complete 
33999852f515: Pull complete 
11679b84da5e: Pull complete 
231eb8ba046b: Pull complete 
7d894676fbc1: Pull complete 
Digest: sha256:847690afb29977920dbdbcf64a8669a2aaa0a202844fe80ea5cb524ede9f0a0b
Status: Downloaded newer image for tensorflow/tensorflow:latest-gpu
2018-11-26 05:48:05.315151: I tensorflow/core/platform/cpu_feature_guard.cc:141] Your CPU supports instructions that this TensorFlow binary was not compiled to use: AVX2 FMA
2018-11-26 05:48:05.490068: I tensorflow/stream_executor/cuda/cuda_gpu_executor.cc:964] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero
2018-11-26 05:48:05.490510: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1432] Found device 0 with properties: 
name: GeForce RTX 2070 major: 7 minor: 5 memoryClockRate(GHz): 1.725
pciBusID: 0000:01:00.0
totalMemory: 7.76GiB freeMemory: 7.09GiB
2018-11-26 05:48:05.490528: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1511] Adding visible gpu devices: 0
2018-11-26 05:48:05.727215: I tensorflow/core/common_runtime/gpu/gpu_device.cc:982] Device interconnect StreamExecutor with strength 1 edge matrix:
2018-11-26 05:48:05.727251: I tensorflow/core/common_runtime/gpu/gpu_device.cc:988]      0 
2018-11-26 05:48:05.727257: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1001] 0:   N 
2018-11-26 05:48:05.727423: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1115] Created TensorFlow device (/job:localhost/replica:0/task:0/device:GPU:0 with 6817 MB memory) -> physical GPU (device: 0, name: GeForce RTX 2070, pci bus id: 0000:01:00.0, compute capability: 7.5)
tf.Tensor(-568.0144, shape=(), dtype=float32)