LTE transport channel

The physical layer transport services are described by how and with what characteristics data are transferred over the radio interface. An adequate term for this is “Transport Channel”.

一、Downlink transport channel types are:
1. Broadcast Channel (BCH) characterised by:
- fixed, pre-defined transport format;
- requirement to be broadcast in the entire coverage area of the cell.
2. Downlink Shared Channel (DL-SCH) characterised by:
- support for HARQ;
- support for dynamic link adaptation by varying the modulation, coding and transmit power;
- possibility to be broadcast in the entire cell;
- possibility to use beamforming;
- support for both dynamic and semi-static resource allocation;
- support for Ug;
3. Paging Channel (PCH) characterised by:
- support for UE discontinuous reception (DRX) to enable UE power saving (DRX cycle is indicated by the network to the UE);
- requirement to be broadcast in the entire coverage area of the cell;
- mapped to physical resources which can be used dynamically also for traffic/other control channels.
4. Multicast Channel (MCH) characterised by:
- requirement to be broadcast in the entire coverage area of the cell;
- support for MBSFN combining of MBMS transmission on multiple cells;
- support for semi-static resource allocation e.g. with a time frame of a long cyclic prefix.

二、Uplink transport channel types are:

1. Uplink Shared Channel (UL-SCH) characterised by:
- possibility to use beamforming; (likely no impact on specifications)
- support for dynamic link adaptation by varying the transmit power and potentially modulation and coding;
- support for HARQ;
- support for both dynamic and semi-static resource allocation.
NOTE: the possibility to use uplink synchronisation and timing advance depend on the physical layer.
2. Random Access Channel(s) (RACH) characterised by:
- limited control information;
- collision risk;
The figures below depict the mapping between transport and physical channels: