Stm32 HAL+SHT85温湿度传感器

##CubeMX IIC设置

HAL代码

void MX_I2C1_Init(void)
{

  hi2c1.Instance = I2C1;
  hi2c1.Init.ClockSpeed = 1;
  hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
  hi2c1.Init.OwnAddress1 = 0x44;
  hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
  hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
  hi2c1.Init.OwnAddress2 = 0;
  hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
  hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
  if (HAL_I2C_Init(&hi2c1) != HAL_OK)
  {
    Error_Handler();
  }

}

ST HAL IIC库 底层设备通讯地址需要修改
这里原始只是将最后一位置0置1,修改如下

读取sht85温湿度数据

#define CRC_POLYNOMIAL  0x131 // P(x) = x^8 + x^5 + x^4 + 1 = 100110001
#define I2C_ADDR        0x44


/* USER CODE BEGIN PFP */


/* USER CODE END Includes */
static float CalcTemperature(uint16_t rawValue);
static float CalcHumidity(uint16_t rawValue);
void WriteCommand(etCommands command);
void SHT85_ReadSerialNumber1(uint32_t* serialNumber);
void SHT85_SingleMeasurment1(float* temperature, float* humidity,
                               etSingleMeasureModes measureMode,
                               uint8_t timeout);

uint8_t revbuff[10]={0,};
uint32_t serialNumber;   // serial number
float    temperature;    // temperature 
float    humidity;    
HAL_StatusTypeDef err0r;

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Priv