Rk3399-linux-适配ap6256

修改设备树

内核添加驱动

wifi驱动：/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/bcmdhd.ko
蓝牙驱动：/kernel/drivers/bluetooth/hci_uart.ko

WIFI-STA配置文件

/etc/wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant
update_config=1
ap_scan=1

WIFI-AP配置文件

/etc/hostapd.conf

##### hostapd configuration file ##############################################
# Empty lines and lines starting with # are ignored

# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
# management frames with the Host AP driver); wlan0 with many nl80211 drivers
# Note: This attribute can be overridden by the values supplied with the '-i'
# command line parameter.
interface=wlan0

logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2

ctrl_interface=/var/run/hostapd

ctrl_interface_group=0

ssid=wifi-zhanghao
hw_mode=g

channel=1

beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=-1
fragm_threshold=-1
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0

wmm_enabled=1
#
# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
#uapsd_advertisement_enabled=1
#
# Low priority / AC_BK = background
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
#
# Normal priority / AC_BE = best effort
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
#
# High priority / AC_VI = video
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
#
# Highest priority / AC_VO = voice
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0

# EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if
# only broadcast keys are used)
eapol_key_index_workaround=0

# The own IP address of the access point (used as NAS-IP-Address)
own_ip_addr=127.0.0.1

wpa=3

wpa_passphrase=12345678

wpa_key_mgmt=WPA-PSK WPA-EAP

# Pairwise cipher for WPA (v1) (default: TKIP)
wpa_pairwise=TKIP CCMP
# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
rsn_pairwise=CCMP

/etc/dnsmasq.conf

user=root
interface=wlan0
dhcp-range=192.168.2.100,192.168.2.150,12h

蓝牙配置文件

brcm_patchram_plus1 --bd_addr_rand --enable_hci --no2bytes --use_baudrate_for_download  --tosleep  200000 --baudrate 1500000 --patchram /system/etc/firmware/BCM4345C0.hcd /dev/ttyS0