RIP做手工汇总:
在R1创建两个环回口方便后面做汇总(只能在出方向做路由汇总);R1与R2的网段为12.1.1.0/24,R1的e0/0接口地址为12.1.1.1,其余接口均按照设备序号排列。
为避免长篇幅,此处只列出设备主要配置
R1:
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Loopback1
ip address 172.16.1.254 255.255.255.0
!
interface Loopback2
ip address 172.16.2.254 255.255.255.0
!
interface Ethernet0/0
ip address 12.1.1.1 255.255.255.0
ip summary-address rip 172.16.0.0 255.255.0.0
!
router rip
version 2
network 1.0.0.0
network 12.0.0.0
network 172.16.0.0
no auto-summary
!
R2:
interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface Ethernet0/0
ip address 12.1.1.2 255.255.255.0
!
interface Serial2/0
ip address 23.1.1.2 255.25