ospf接口认证配置详解

实验目的：1.掌握ospf接口认证配置方法

实验拓扑：

步骤1:基本配置（接口配置+ospf配置）见http://t.csdn.cn/mugochttp://t.csdn.cn/mugoc步骤2:启用ospf明文认证

R1(config)#interface f0/0
R1(config-if)#ip ospf authentication
R1(config-if)#ip ospf authentication-key 123

打开debug

R1#debug ip ospf adj 
OSPF adjacency events debugging is on
R1#
*Mar  1 00:17:36.451: OSPF: Rcv pkt from 12.12.12.2, FastEthernet0/0 : Mismatch Authentication type. Input packet specified type 0, we use type 1
R1#

在R2上启用ospf认证

R2(config)#interface f0/0
R2(config-if)#ip ospf authentication
R2(config-if)#ip ospf authentication-key 123

debug信息

R1#
*Mar  1 00:32:25.203: OSPF: Send hello to 224.0.0.5 area 1 on FastEthernet0/0 from 12.12.12.1
*Mar  1 00:32:25.243: ADJ: add 12.12.12.2 (FastEthernet0/0) via ARP will expire: 04:03:00 
*Mar  1 00:32:25.243: ADJ: Computing MAC rewrite for Fa0/0, linktype=ip, addr=12.12.12.2, conn ID=0
*Mar  1 00