若依框架升级SpringBoot3

---

前言

若依官网给出的修改步骤，自己在实际操作过程中发现有部分缺失，无法正常启动。在经过网上查阅资料后进行添加可以重启升级。

注意：先将所有的pom文件修改完成再刷新，否则会出现找不到依赖的错误。如果出现，继续将所有pom文件的内容修改好再刷新。

---

一、修改父项目pom.xml

<!-- java.version版本8更换为17 -->
<java.version>17</java.version>

<!-- spring-boot版本2.5.15更换为3.1.5 -->
<dependency>
	<groupId>org.springframework.boot</groupId>
	<artifactId>spring-boot-dependencies</artifactId>
	<version>3.2.5</version>
	<type>pom</type>
	<scope>import</scope>
</dependency>
<!-- 阿里数据库连接池修改boot-3 -->
<dependency>
    <groupId>com.alibaba</groupId>
    <artifactId>druid-spring-boot-3-starter</artifactId>
    <version>1.2.21</version>
</dependency>

<!-- 新增四个配置依赖 -->
<!-- Jaxb -->
<dependency>
    <groupId>javax.xml.bind</groupId>
    <artifactId>jaxb-api</artifactId>
    <version>2.3.1</version>
</dependency>

<!-- servlet -->
<dependency>
    <groupId>jakarta.servlet</groupId>
    <artifactId>jakarta.servlet-api</artifactId>
    <version>6.0.0</version>
</dependency>

<!-- mybatis-plus -->
<dependency>
    <groupId>com.baomidou</groupId>
    <artifactId>mybatis-plus-boot-starter</artifactId>
    <version>3.5.5</version>
</dependency>

<!-- mysql -->
<dependency>
    <groupId>com.mysql</groupId>
    <artifactId>mysql-connector-j</artifactId>
    <version>8.1.0</version>
</dependency>

二、修改ruoyi-admin/pom.xml文件mysql依赖

<!-- Mysql驱动包 -->
<dependency>
	<groupId>com.mysql</groupId>
	<artifactId>mysql-connector-j</artifactId>
</dependency>

三、修改ruoyi-framework/pom.xml文件

<!-- 修改 验证码 -->
<dependency>
	<groupId>pro.fessional</groupId>
	<artifactId>kaptcha</artifactId>
	<exclusions>
		<exclusion>
			<artifactId>servlet-api</artifactId>
			<groupId>jakarta.servlet</groupId>
		</exclusion>
	</exclusions>
</dependency>

<!-- 修改 阿里数据库连接池 -->
<dependency>
    <groupId>com.alibaba</groupId>
    <artifactId>druid-spring-boot-3-starter</artifactId>
</dependency>

四、修改ruoyi-common/pom.xml文件

<!-- 修改 servlet包 -->
<dependency>
	<groupId>jakarta.servlet</groupId>
	<artifactId>jakarta.servlet-api</artifactId>
</dependency>

<!-- 添加 mybatis-plus -->
<dependency>
    <groupId>com.baomidou</groupId>
    <artifactId>mybatis-plus-boot-starter</artifactId>
</dependency>

<!-- 添加 mybatis-spring -->
<dependency>
    <groupId>org.mybatis</groupId>
    <artifactId>mybatis-spring</artifactId>
    <version>3.0.3</version>
</dependency>

五、修改ruoyi-generator/pom.xml文件

<!-- 修改 阿里数据库连接池 -->
<dependency>
    <groupId>com.alibaba</groupId>
    <artifactId>druid-spring-boot-3-starter</artifactId>
</dependency>

六、修改DruidConfig类

将引入的Druid改为boot3

import com.alibaba.druid.spring.boot3.autoconfigure.DruidDataSourceBuilder;
import com.alibaba.druid.spring.boot3.autoconfigure.properties.DruidStatProperties;

七、修改SecurityConfig类

package com.ruoyi.framework.config;

import com.ruoyi.framework.config.properties.PermitAllUrlProperties;
import com.ruoyi.framework.security.filter.JwtAuthenticationTokenFilter;
import com.ruoyi.framework.security.handle.AuthenticationEntryPointImpl;
import com.ruoyi.framework.security.handle.LogoutSuccessHandlerImpl;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.http.HttpMethod;
import org.springframework.security.authentication.AuthenticationManager;
import org.springframework.security.authentication.ProviderManager;
import org.springframework.security.authentication.dao.DaoAuthenticationProvider;
import org.springframework.security.config.annotation.method.configuration.EnableMethodSecurity;
import org.springframework.security.config.annotation.web.builders.HttpSecurity;
import org.springframework.security.config.annotation.web.configurers.AbstractHttpConfigurer;
import org.springframework.security.config.annotation.web.configurers.HeadersConfigurer;
import org.springframework.security.config.http.SessionCreationPolicy;
import org.springframework.security.core.userdetails.UserDetailsService;
import org.springframework.security.crypto.bcrypt.BCryptPasswordEncoder;
import org.springframework.security.web.SecurityFilterChain;
import org.springframework.security.web.authentication.UsernamePasswordAuthenticationFilter;
import org.springframework.security.web.authentication.logout.LogoutFilter;
import org.springframework.web.filter.CorsFilter;

/**
 * spring security配置
 *
 * @author ruoyi
 */
@EnableMethodSecurity(securedEnabled = true)
@Configuration
public class SecurityConfig {
    /**
     * 自定义用户认证逻辑
     */
    @Autowired
    private UserDetailsService userDetailsService;

    /**
     * 认证失败处理类
     */
    @Autowired
    private AuthenticationEntryPointImpl unauthorizedHandler;

    /**
     * 退出处理类
     */
    @Autowired
    private LogoutSuccessHandlerImpl logoutSuccessHandler;

    /**
     * token认证过滤器
     */
    @Autowired
    private JwtAuthenticationTokenFilter authenticationTokenFilter;

    /**
     * 跨域过滤器
     */
    @Autowired
    private CorsFilter corsFilter;

    /**
     * 允许匿名访问的地址
     */
    @Autowired
    private PermitAllUrlProperties permitAllUrl;

    /**
     * @return
     * @throws Exception
     */
    @Bean
    AuthenticationManager authenticationManager() {
        DaoAuthenticationProvider daoAuthenticationProvider = new DaoAuthenticationProvider();
        // 身份认证接口
        daoAuthenticationProvider.setUserDetailsService(userDetailsService);
        daoAuthenticationProvider.setPasswordEncoder(bCryptPasswordEncoder());
        return new ProviderManager(daoAuthenticationProvider);
    }

    /**
     * anyRequest | 匹配所有请求路径
     * access | SpringEl表达式结果为true时可以访问
     * anonymous | 匿名可以访问
     * denyAll | 用户不能访问
     * fullyAuthenticated | 用户完全认证可以访问（非remember-me下自动登录）
     * hasAnyAuthority | 如果有参数，参数表示权限，则其中任何一个权限可以访问
     * hasAnyRole | 如果有参数，参数表示角色，则其中任何一个角色可以访问
     * hasAuthority | 如果有参数，参数表示权限，则其权限可以访问
     * hasIpAddress | 如果有参数，参数表示IP地址，如果用户IP和参数匹配，则可以访问
     * hasRole | 如果有参数，参数表示角色，则其角色可以访问
     * permitAll | 用户可以任意访问
     * rememberMe | 允许通过remember-me登录的用户访问
     * authenticated | 用户登录后可访问
     */
    @Bean
    SecurityFilterChain filterChain(HttpSecurity httpSecurity) throws Exception {
        return httpSecurity
                // CSRF禁用，因为不使用session
                .csrf(AbstractHttpConfigurer::disable)
                // 禁用HTTP响应标头
                .headers(header -> header.cacheControl(HeadersConfigurer.CacheControlConfig::disable).frameOptions(HeadersConfigurer.FrameOptionsConfig::disable))
                // 认证失败处理类
                .exceptionHandling(exception -> exception.authenticationEntryPoint(unauthorizedHandler))
                // 基于token，所以不需要session
                .sessionManagement(session -> session.sessionCreationPolicy(SessionCreationPolicy.STATELESS))
                // 注解标记允许匿名访问的url
                .authorizeHttpRequests((requests) -> {
                    permitAllUrl.getUrls().forEach(url -> requests.requestMatchers(url).permitAll());
                    // 对于登录login 注册register 验证码captchaImage 允许匿名访问
                    requests.requestMatchers("/login", "/register", "/captchaImage").permitAll()
                            // 静态资源，可匿名访问
                            .requestMatchers(HttpMethod.GET, "/", "/*.html", "/**.html", "/**.css", "/**.js", "/profile/**").permitAll()
                            .requestMatchers("/swagger-ui.html", "/swagger-resources/**", "/webjars/**", "/*/api-docs", "/*/api-docs/**", "/druid/**").permitAll()
                            // 除上面外的所有请求全部需要鉴权认证
                            .anyRequest().authenticated();
                })
                // 添加Logout filter
                .logout(logout -> logout.logoutUrl("/logout").logoutSuccessHandler(logoutSuccessHandler))
                // 添加JWT filter
                .addFilterBefore(authenticationTokenFilter, UsernamePasswordAuthenticationFilter.class)
                // 添加CORS filter
                .addFilterBefore(corsFilter, JwtAuthenticationTokenFilter.class)
                .addFilterBefore(corsFilter, LogoutFilter.class).build();
    }

    /**
     * 强散列哈希加密实现
     */
    @Bean
    public BCryptPasswordEncoder bCryptPasswordEncoder() {
        return new BCryptPasswordEncoder();
    }
}

八、Java EE转Jakarta EE

Spring Boot 3.0将所有底层依赖项从Java EE迁移到了Jakarta EE，会对一些使用了Java EE的方法造成影响，需要进行相应的修改和调整

javax.annotation 替换成 jakarta.validation
javax.servlet    替换成 jakarta.servlet
javax.validation 替换成 jakarta.validation
#代码生成模板controller.java.vm也需要换一下javax为jakarta

九、解决前端调用了使用@PathVariable接收参数的接口报错的问题

java.lang.IllegalArgumentException: Name for argument of type [java.lang.String] not specified, and parameter name information not available via reflection. Ensure that the compiler uses the ‘-parameters’ flag.

解决办法：指定接收参数名，如@PathVariable(“dictType”)或者@PathVariable(name = “dictType”)

// 调用这个接口会报错
@GetMapping(value = "/type/{dictType}")
public AjaxResult dictType(@PathVariable String dictType)
{
    List<SysDictData> data = dictTypeService.selectDictDataByType(dictType);
    if (StringUtils.isNull(data))
    {
        data = new ArrayList<SysDictData>();
    }
    return success(data);
}

// 修改之后
@GetMapping(value = "/type/{dictType}")
public AjaxResult dictType(@PathVariable("dictType") String dictType)
{
    List<SysDictData> data = dictTypeService.selectDictDataByType(dictType);
    if (StringUtils.isNull(data))
    {
        data = new ArrayList<SysDictData>();
    }
    return success(data);
}

---

总结