链路聚合

最新推荐文章于 2023-06-27 21:19:37 发布
最新推荐文章于 2023-06-27 21:19:37 发布
阅读量347 收藏
点赞数
文章标签： 网络
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_45169366/article/details/115005504
版权

一、手工配置
在这里插入图片描述

LSW1配置
The device is running!
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys SWA
Mar 19 2021 11:43:18-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.g	
[SWA]interface Eth-Trunk 1
[SWA-Eth-Trunk1]int e0/0/03
[SWA-Ethernet0/0/3]e	
[SWA-Ethernet0/0/3]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWA-Ethernet0/0/3]
Mar 19 2021 11:51:33-08:00 SWA %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 h
as turned into UP state.
[SWA-Ethernet0/0/3]
[SWA-Ethernet0/0/3]int e0/0/2
[SWA-Ethernet0/0/2]e	
[SWA-Ethernet0/0/2]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWA-Ethernet0/0/2]
Mar 19 2021 11:52:09-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWA-Ethernet0/0/2]
[SWA-Ethernet0/0/2]q
[SWA]dis		
[SWA]display interface Eth-Trunk 1 （查看链路集合信息）
Eth-Trunk1 current state : UP
Line protocol current state : UP
Description:
Switch Port, PVID :    1, Hash arithmetic : According to SIP-XOR-DIP,Maximal BW:
 200M, Current BW: 200M, The Maximum Frame Length is 9216
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4c1f-cc50-0322
Current system time: 2021-03-19 11:54:41-08:00
    Input bandwidth utilization  :    0%
    Output bandwidth utilization :    0%
-----------------------------------------------------
PortName                      Status      Weight
-----------------------------------------------------
Ethernet0/0/3                 UP          1
Ethernet0/0/2                 UP          1
-----------------------------------------------------
The Number of Ports in Trunk : 2
The Number of UP Ports in Trunk : 2


[SWA]
<SWA> User interface con0 is available
Please Press ENTER.
<Huawei>
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys SWB
[SWB]
Mar 19 2021 11:52:20-08:00 SWB DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWB]	
[SWB]interface Eth-Trunk 1
[SWB-Eth-Trunk1]int e0/0/2
[SWB-Ethernet0/0/2]e	
[SWB-Ethernet0/0/2]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWB-Ethernet0/0/2]
Mar 19 2021 11:53:05-08:00 SWB %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 h
as turned into UP state.
[SWB-Ethernet0/0/2]
Mar 19 2021 11:53:10-08:00 SWB DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWB-Ethernet0/0/2]
[SWB-Ethernet0/0/2]int e0/0/1
[SWB-Ethernet0/0/1]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWB-Ethernet0/0/1]
Mar 19 2021 11:53:50-08:00 SWB DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095. User interface con0 is available
Please Press ENTER.
<Huawei>

在这里插入图片描述

在这里插入图片描述

二、LACP模式
在这里插入图片描述

LSW5
The device is running!
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys LW5
Mar 19 2021 12:30:22-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.
               ^
Error:Incomplete command found at '^' position.
[LW5]interface e	
[LW5]interface Eth-	
[LW5]interface Eth-Trunk 1	
[LW5-Eth-Trunk1]mode la	
[LW5-Eth-Trunk1]mode lacp-static 
[LW5-Eth-Trunk1]
Mar 19 2021 12:31:02-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[LW5-Eth-Trunk1]
[LW5-Eth-Trunk1]int e0/0/3
[LW5-Ethernet0/0/3]e	
[LW5-Ethernet0/0/3]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LW5-Ethernet0/0/3]int 
Mar 19 2021 12:32:02-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095.e0/0/2
[LW5-Ethernet0/0/2]e	
[LW5-Ethernet0/0/2]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LW5-Ethernet0/0/2]
Mar 19 2021 12:32:22-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095.
[LW5-Ethernet0/0/2]
[LW5-Ethernet0/0/2]int r0/0/2
                   ^
Error: Unrecognized command found at '^' position.
[LW5-Ethernet0/0/2]int e0/0/2
[LW5-Ethernet0/0/2]int e0/0/4
[LW5-Ethernet0/0/4]e	
[LW5-Ethernet0/0/4]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LW5-Ethernet0/0/4]
Mar 19 2021 12:33:12-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 8, the c
hange loop count is 0, and the maximum number of records is 4095.
[LW5-Ethernet0/0/4]
[LW5-Ethernet0/0/4]la	
[LW5-Ethernet0/0/4]lacp p	
[LW5-Ethernet0/0/4]lacp priority 100  //（优先考虑的事）越大越好
[LW5-Ethernet0/0/4]int e
Mar 19 2021 12:33:42-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 9, the c
hange loop count is 0, and the maximum number of records is 4095.0/0/3
[LW5-Ethernet0/0/3]la	
[LW5-Ethernet0/0/3]lacp p	
[LW5-Ethernet0/0/3]lacp priority 100
Mar 19 2021 12:34:02-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 10, the 
change loop count is 0, and the maximum number of records is 4095.	
[LW5-Ethernet0/0/3]
[LW5-Ethernet0/0/3]q
[LW5]lacp priority 100         //设置本地的优先级
[LW5]
[LW5]
[LW5]info-center	
[LW5]interface e	
[LW5]interface Eth-	
[LW5]interface Eth-Trunk 1
[LW5-Eth-Trunk1]ma	
[LW5-Eth-Trunk1]max a	
[LW5-Eth-Trunk1]max active-linknumber 2  //设置最大连接数
[LW5-Eth-Trunk1]
[LW5-Eth-Trunk1]
[LW5-Eth-Trunk1]	
[LW5-Eth-Trunk1]
[LW5-Eth-Trunk1]
[LW5-Eth-Trunk1]
Mar 19 2021 12:34:32-08:00 LW5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 11, the 
change loop count is 0, and the maximum number of records is 4095.
<LW5>dis rth  //再去查看状态
         ^
Error: Unrecognized command found at '^' position.
<LW5>dis eth 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1                   WorkingMode: STATIC                               
Preempt Delay: Disabled     Hash arithmetic: According to SIP-XOR-DIP         
System Priority: 32768      System ID: 4c1f-cc8b-70c5                         
Least Active-linknumber: 1  Max Active-linknumber: 2                          
Operate status: down        Number Of Up Port In Trunk: 0                     
--------------------------------------------------------------------------------
ActorPortName          Status   PortType PortPri PortNo PortKey PortState Weight
Ethernet0/0/3          Unselect 100M     100     4      289     10100010  1     
Ethernet0/0/2          Unselect 100M     32768   3      289     10100010  1     
Ethernet0/0/4          Unselect 100M     100     5      289     10100010  1     

Partner:
--------------------------------------------------------------------------------
ActorPortName          SysPri   SystemID        PortPri PortNo PortKey PortState
Ethernet0/0/3          0        0000-0000-0000  0       0      0       10100011
Ethernet0/0/2          0        0000-0000-0000  0       0      0       10100011
Ethernet0/0/4          0        0000-0000-0000  0       0      0       10100011
    
<LW5>
Mar 19 2021 12:35:59-08:00 LW5 %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 h
as turned into UP state.
<Huawei>

[LSW6]配置
The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys LSW6
[LSW6]in	
[LSW6]info-center	
[LSW6]interface e	
[LSW6]interface Eth
Mar 19 2021 12:35:23-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 4, the 
change loop count is 0, and the maximum number of records is 4095.-	
[LSW6]interface Eth-Trunk 1
[LSW6-Eth-Trunk1]mo	
[LSW6-Eth-Trunk1]mode la	
[LSW6-Eth-Trunk1]mode lacp-static    //模式；方式
[LSW6-Eth-Trunk1]int e0/
Mar 19 2021 12:35:43-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 5, the 
change loop count is 0, and the maximum number of records is 4095
[LSW6-Eth-Trunk0]int e0/0/4
[LSW6-Ethernet0/0/4]e	
[LSW6-Ethernet0/0/4]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW6-Ethernet0/0/4]
Mar 19 2021 12:35:59-08:00 LSW6 %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 
has turned into UP state.
[LSW6-Ethernet0/0/4]
[LSW6-Ethernet0/0/4]int
Mar 19 2021 12:36:03-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 6, the 
change loop count is 0, and the maximum number of records is 4095.
                    ^
Error: Unrecognized command found at '^' position.
[LSW6-Ethernet0/0/4]int e0/0/3
[LSW6-Ethernet0/0/3]e	
[LSW6-Ethernet0/0/3]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW6-Ethernet0/0/3]int 
Mar 19 2021 12:36:34-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 7, the 
change loop count is 0, and the maximum number of records is 4095.e0/0/2
[LSW6-Ethernet0/0/2]e	
[LSW6-Ethernet0/0/2]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW6-Ethernet0/0/2]i
Mar 19 2021 12:36:44-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 8, the 
change loop count is 0, and the maximum number of records is 4095.nt
                    ^
Error: Unrecognized command found at '^' position.
[LSW6-Ethernet0/0/2]int e0/0/3
[LSW6-Ethernet0/0/3]lac	
[LSW6-Ethernet0/0/3]lacp p	
[LSW6-Ethernet0/0/3]lacp priority 100
[LSW6-Ethernet0/0/3]
Mar 19 2021 12:37:14-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 9, the 
change loop count is 0, and the maximum number of records is 4095.int e0/0/4
[LSW6-Ethernet0/0/4]la	
[LSW6-Ethernet0/0/4]lacp pa	
[LSW6-Ethernet0/0/4]lacp p	
[LSW6-Ethernet0/0/4]lacp priority 100
[LSW6-Ethernet0/0/4]
Mar 19 2021 12:37:44-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 10, the
 change loop count is 0, and the maximum number of records is 4095.
[LSW6-Ethernet0/0/4]
[LSW6-Ethernet0/0/4]q
[LSW6]
[LSW6]lacp priority 100         //设置本地的优先级
[LSW6]
[LSW6]info-center	
[LSW6]interface e	
[LSW6]interface Eth-	
[LSW6]interface Eth-Trunk 1
[LSW6-Eth-Trunk1]max a	
[LSW6-Eth-Trunk1]max active-linknumber 2
[LSW6-Eth-Trunk1]q
[LSW6]d
Mar 19 2021 12:38:24-08:00 LSW6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.2
5.191.3.1 configurations have been changed. The current change number is 11, the
 change loop count is 0, and the maximum number of records is 4095.
Error: Input "dot1x enable" to enable 802.1x.
[LSW6]
[LSW6]dis eth
Eth-Trunk1's state information is:
Local:
LAG ID: 1                   WorkingMode: STATIC                               
Preempt Delay: Disabled     Hash arithmetic: According to SIP-XOR-DIP         
System Priority: 32768      System ID: 4c1f-ccbb-7b01                         
Least Active-linknumber: 1  Max Active-linknumber: 2                          
Operate status: up          Number Of Up Port In Trunk: 2                     
--------------------------------------------------------------------------------
ActorPortName          Status   PortType PortPri PortNo PortKey PortState Weight
Ethernet0/0/4          Selected 100M     100     5      289     10111100  1     
Ethernet0/0/3          Selected 100M     100     4      289     10111100  1     
Ethernet0/0/2          Unselect 100M     32768   3      289     10100000  1     

Partner:
--------------------------------------------------------------------------------
ActorPortName          SysPri   SystemID        PortPri PortNo PortKey PortState
Ethernet0/0/4          32768    4c1f-cc8b-70c5  100     5      289     10111100
Ethernet0/0/3          32768    4c1f-cc8b-70c5  100     4      289     10111100
Ethernet0/0/2          32768    4c1f-cc8b-70c5  32768   3      289     10100000
    
Eth-Trunk0's state information is:
WorkingMode: NORMAL         Hash arithmetic: According to SIP-XOR-DIP         
Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              
Operate status: down        Number Of Up Port In Trunk: 0                     
--------------------------------------------------------------------------------
PortName                      Status      Weight 
  
[LSW6]
<Huawei>
<Huawei>

交换机lacp配置
[SW1]interface Eth-Trunk 1
[SW1-Eth-Trunk1]mode lacp-static
[SW1-Ethernet0/0/4]eth-trunk 1
[SW1-Ethernet0/0/2]eth-trunk 1
[SW1-Ethernet0/0/3]eth-trunk 1
[SW1-Ethernet0/0/3]lacp priority 100C
[SW1-Ethernet0/0/2]lacp priority 100
[SW1]lacp priority 100 //设置本地的优先级
[SW1-Eth-Trunk1]max active-linknumber 2 //设置最大连接数
[SW1]dis eth 1 //再去查看状态
对端做相应的配置，不过不需要更改优先级

三、三层链路聚合配置

在这里插入图片描述

AR1配置

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys RTA
[RTA]in	
[RTA]info-center
[RTA]interface e	
[RTA]interface Eth-Trunk 1
[RTA-Eth-Trunk1]undo p	
[RTA-Eth-Trunk1]undo port
[RTA-Eth-Trunk1]undo port-isolate
[RTA-Eth-Trunk1]undo port-security
[RTA-Eth-Trunk1]undo portswitch    //把聚合链路从二层转为三层链路
[RTA-Eth-Trunk1]ip add 100.1.1.1 24 //配置三层的IP地址
[RTA-Eth-Trunk1]q
[RTA]int g0/0/1
[RTA-GigabitEthernet0/0/1]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[RTA-GigabitEthernet0/0/1]
Mar 19 2021 12:46:16-08:00 RTA %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 h
as turned into UP state. 
[RTA-GigabitEthernet0/0/1]
Mar 19 2021 12:46:16-08:00 RTA %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
 on the interface Eth-Trunk1 has entered the UP state. 
[RTA-GigabitEthernet0/0/1]
[RTA-GigabitEthernet0/0/1]int g0/0/0
[RTA-GigabitEthernet0/0/0]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[RTA-GigabitEthernet0/0/0]q
[RTA]dis eth
Eth-Trunk1's state information is:
WorkingMode: NORMAL         Hash arithmetic: According to SIP-XOR-DIP         
Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              
Operate status: up          Number Of Up Port In Trunk: 2                     
--------------------------------------------------------------------------------
PortName                      Status      Weight 
GigabitEthernet0/0/1          Up          1      
GigabitEthernet0/0/0          Up          1      
  
[RTA]
<RTA>ping 100.1.1.2
  PING 100.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=70 ms
    Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=10 ms
    Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 100.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/30/70 ms
<RTA>


AR2配置

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys RTA
[RTA]in	
[RTA]info-center
[RTA]interface e	
[RTA]interface Eth-Trunk 1 
[RTA-Eth-Trunk1]undo p	
[RTA-Eth-Trunk1]undo portswitch  //把聚合链路从二层转为三层链路
[RTA-Eth-Trunk1]ip add 100.1.1.1 24  //配置三层的IP地址
[RTA-Eth-Trunk1]q
[RTA]int g0/0/1
[RTA-GigabitEthernet0/0/1]e	
[RTA-GigabitEthernet0/0/1]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[RTA-GigabitEthernet0/0/1]
Mar 19 2021 12:46:16-08:00 RTA %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 h
as turned into UP state. 
[RTA-GigabitEthernet0/0/1]
Mar 19 2021 12:46:16-08:00 RTA %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
 on the interface Eth-Trunk1 has entered the UP state. 
[RTA-GigabitEthernet0/0/1]
[RTA-GigabitEthernet0/0/1]int g0/0/0
[RTA-GigabitEthernet0/0/0]e	
[RTA-GigabitEthernet0/0/0]efm
[RTA-GigabitEthernet0/0/0]enable
[RTA-GigabitEthernet0/0/0]energy-efficient-ethernet
[RTA-GigabitEthernet0/0/0]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[RTA-GigabitEthernet0/0/0]
[RTA-GigabitEthernet0/0/0]
[RTA-GigabitEthernet0/0/0]q
[RTA]dis eth
Eth-Trunk1's state information is:
WorkingMode: NORMAL         Hash arithmetic: According to SIP-XOR-DIP         
Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              
Operate status: up          Number Of Up Port In Trunk: 2                     
--------------------------------------------------------------------------------
PortName                      Status      Weight 
GigabitEthernet0/0/1          Up          1      
GigabitEthernet0/0/0          Up          1      
  
[RTA]
<RTA>ping 100.1.1.2
  PING 100.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=70 ms
    Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=10 ms
    Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 100.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/30/70 ms
	
<RTA>dis interface Eth-Trunk1
Eth-Trunk1 current state : UP
Line protocol current state : UP
Last line protocol up time : 2021-03-19 12:46:16 UTC-08:00
Description:HUAWEI, AR Series, Eth-Trunk1 Interface
Route Port,Hash arithmetic : According to SIP-XOR-DIP,Maximal BW: 2G, Current BW
: 2G, The Maximum Transmit Unit is 1500
Internet Address is 100.1.1.1/24
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc0f-0c40
Current system time: 2021-03-19 12:52:00-08:00
Input: 7 packets, 610 bytes
  Unicast:                  6,  Multicast:                0
  Broadcast:                1,  Discard:                  0
  Total Error:              0

Output: 7 packets, 610 bytes
  Unicast:                  5,  Multicast:                0
  Broadcast:                2,  Discard:                  0
  Total Error:              0

    Input bandwidth utilization  :    0%
    Output bandwidth utilization :    0%
-----------------------------------------------------
PortName                      Status      Weight
-----------------------------------------------------
GigabitEthernet0/0/1          UP          1
GigabitEthernet0/0/0          UP          1
-----------------------------------------------------

<RTA>
張小财迷
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
hybrid模式以及STP树结构的实验
m0_48580960的博客
04-08 211
实验一 交换机一的代码如下： The device is running! <Huawei>vlan batch 1 10 3 2 ^ Error: Unrecognized command found at '^' position. <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]vlan batch 1 10 3 2 Info: This operation may
广播风暴的分析和解决方法（STP配置）
weixin_69884785的博客
09-20 935
广播风暴的分析和解决方法（STP设置，端口分配）
华为交换机SSH报错Socket error Event: 32 Error: 10053. Connection closing...Socket close.
本博客，博文仅代表个人操作经验，不能完全解决你的问题，仅供参考，佛系回复。
03-28 2874
Xshell连接不上SSH 出现Socket error Event: 32 Error: 10053.输入：ssh server-source all-interface。SSH登录弱秘钥算法不支持问题。2.sy视图，取消之前做的配置。3.更改source端口。4.更新一下服务类型。
华为模拟器基本视图
HYJW01的博客
04-25 1375
网络 功能： 信息传递 资源共享 增加可靠 增加系统处理能力 TCP/ip 五层参考模型 应用层 计算机 上层数据 传输层 防火墙 数据段 网络层 路由器 数据包 数据链路层 交换机 数据帧 物理层 网卡 比特流 网络设备基本命令 命令行视图 <huawei> 用户 在用户视图敲systemem-view进入 [huawei] 系统 interface Ethernet...
2023.6.27 服务器
2302_78575222的博客
06-27 319
Huawei>sy[Huawei]sy[s1]vlan b[s1]u t msysy[s2][s2]u t msy[s2]vlan bu t m。
华为交换机配置链路聚合
07-07
"华为交换机配置链路聚合" 链路聚合是将多个物理接口捆绑为一个逻辑接口，实现增加链路带宽、提高可靠性、提供负载分担的目的。在华为交换机中，链路聚合有两种模式：手工模式和LACP模式。 手工模式链路聚合： ...
配置LACP模式链路聚合.docx
最新发布
01-04
LACP 模式链路聚合配置 LACP（Link Aggregation Control Protocol）是一种链路聚合协议，用于将多个物理链路聚合成一个逻辑链路，提高链路的带宽和可靠性。本文将详细介绍 LACP 模式链路聚合的配置过程和实现原理。...
实验：Jan16公司基于链路聚合提高公司局域网带宽.docx
10-27
本次实验的核心目标是通过实施链路聚合技术来提高Jan16公司的局域网带宽。具体来说，实验涵盖了以下几方面内容： 1. **配置部门VLAN**：为了实现不同部门间的网络隔离与安全控制，需要在交换机上设置相应的VLAN...
使用链路聚合提高公司局域网带宽.rar
02-15
3、应用场景：使用链路聚合提高公司局域网带宽 4、特点：Word文档提供了实验的详细过程，包括每一步骤的操作命令和截图，并给出了实验的topo文件（包括配置信息） 5、适用人群：网络系统的建设与运维 6、使用说明:...
H3C_链路聚合基础配置案例
04-15
链路聚合，也称为端口聚合或Trunk聚合，是一种在网络设备之间组合多个物理链路以形成一个逻辑上的单一高带宽、高可用性的连接的技术。在H3C的网络设备上，这种技术通常用于增强网络带宽和提高链路的冗余性，确保即使...
华为交换机常用查看设备信息的命令
appdeveloperxg的博客
07-06 2万+
当华为交换机设备发生异常时，可以通过查看设备信息检查状态是否正常 1、查看设备的部件信息和状态信息 [023wg.com]display device ? slot Slot | Matching output...
华为S5720S重置密码
热门推荐
Adrian的博客
04-14 2万+
s5720s重置密码
华为数据中心网络设备例行维护
weixin_44442434的博客
01-03 2177
例行维护的目的 例行维护是一种预防性的维护。它是是对设备进行的定期检查与保养，及时发现并消除设备存在的缺陷或隐患，确保设备能够长期安全、稳定、可靠地运行，满足业务运行的需求。 例行维护的基本原则 机房环境 机房的运行环境应达到相关国家标准或行业标准的基本要求，保持清洁与干净，并防尘、防潮，防止鼠虫进入。 人员要求 维护人员在上岗前必须接受必要的维护培训，学习必要的设备维护知识、掌握设备的基本操作技能和应急处理技能，并严格遵守操作规程和行业安全规程，确保人身安全与设备安全。 设备维护规范 ...
timeview未就绪_H3C SecBlade LB插卡 命令参考-6PW103
weixin_26808439的博客
01-14 1260
存储介质有多种类型，如CF卡、U盘等。本手册以CF卡为例进行描述。1.1.1 configure-user count【命令】configure-user countnumberundo configure-user count【视图】系统视图【缺省级别】2：系统级【参数】number：用户数，取值范围为1～55。【描述】configure-user count命令用来设置可以同时进入系统视图的...
STP生成树
weixin_55609833的博客
03-15 386
STP生成树一、STP概述1.交换网络环路的产生2.广播风暴3.STP协议二、STP工作原理1.STP简介2.生成树算法及验证三、eNSP设置STP命令 一、STP概述 1.交换网络环路的产生 为了连接更大范围、更多数量的主机，可以将许多交换设备互连，构成一个数据中继与转发的“中间网络”，然后再将主机连接到距离较近的交换设备上，主机之间的数据传输通过“中间网络”实现中继与转发。这个中间网络不需要关心所传输数据的内容，而只是为这些数据从一个结点到另外一个结点直至到达目的结点提供数据中继与交换的功能，因此，称之
Console口登录的三种认证方式介绍及演示
weixin_34114823的博客
01-23 1万+
本文实验采用的交换机是H3C模拟器，下载地址如下：http://forum.h3c.com/forum.php?mod=viewthread&tid=109740&highlight=H3C%E6%A8%A1%E6%8B%9F%E5%99%A8 有兴趣的朋友可以在论坛上去下载。 一、简单介绍 通过在Console口用户界面下配置认证方式，可以对使...
2021-04-22
m0_56229717的博客
04-22 1502
题目要求 LSW1 ; r state BACKUP changed to MASTER, because of protocol timer expired. (Interface= Vlanif2, VrId=1, InetType=IPv4) [sw1-Vlanif2]vrrp Apr 22 2021 15:39:16-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011...
配置用户通过STelnet登录设备（RSA认证方式）
m0_60444349的博客
01-01 1613
1．交换机配置 1.1、配置vty线路 # user-interface con 0 user-interface vty 0 4 authentication-mode aaa user privilege level 15 #一定给vty接口配置用户等级，否则登录后huawei无法修改配置 ...
巡检常见问题及解决方案（一）
weixin_34301132的博客
12-14 3326
1.端口下出现CRC错包统计例如：XGigabitEthernet0/0/1 current state : UPLine protocol current state : UPDescription:Switch Port, Link-type : access(negotiated),PVID : 1, TPID : 8100(Hex), The Maximum F...
以太网链路聚合：概念、优点与原理
"链路聚合基本概念原理及配置" 链路聚合是一种网络技术，用于将多个物理以太网端口组合成一个逻辑上的单一高带宽、高可靠性的连接。这种技术可以显著提升网络设备间的带宽，同时提供冗余路径以提高网络的可用性和...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值