HCL_多区域配置笔记

IP地址表：

实验拓扑图：

实验步骤：

RTA:

[RTA]isis
[RTA-isis-1]network-entity 10.0000.0000.0001.00
[RTA-isis-1]is-level level-1
[RTA-isis-1]quit
[RTA]int g0/0
[RTA-GigabitEthernet0/0]isis enable 1
[RTA-GigabitEthernet0/0]quit
[RTA]int g0/1
[RTA-GigabitEthernet0/1]isis enable 1
[RTA-GigabitEthernet0/1]quit
[RTA]isis
[RTA-isis-1]cost-style wide
[RTA-isis-1]bandwidth-reference 1000
[RTA-isis-1]auto-cost enable
[RTA-isis-1] quit

RTB:

[RTB]isis
[RTB-isis-1]network-entity 10.0000.0000.0002.00
[RTB-isis-1]is-level level-1
[RTB-isis-1]quit
[RTB]int g0/0
[RTB-GigabitEthernet0/0]isis enable 1
[RTB-GigabitEthernet0/0]quit
[RTB]isis
[RTB-isis-1]cost-style wide
[RTB-isis-1]bandwidth-reference 1000
[RTB-isis-1]auto-cost enable
[RTB-isis-1] quit

RTC:

[RTC]isis
[RTC-isis-1]network-entity 10.0000.0000.0003.00
[RTC-isis-1]is-level level-1
[RTC-isis-1]quit
[RTC]int g0/0
[RTC-GigabitEthernet0/0]isis enable 1
[RTC-GigabitEthernet0/0]int g0/1
[RTC-GigabitEthernet0/1]isis enable 1
[RTC-GigabitEthernet0/1]int s1/0
[RTC-Serial1/0]isis enable 1
[RTC-Serial1/0]quit
[RTC]isis
[RTC-isis-1]cost-style wide
[RTC-isis-1]bandwidth-reference 1000
[RTC-isis-1]auto-cost enable
[RTC-isis-1] quit
[RTC]isis
[RTC-isis-1]address-family ipv4
[RTC-isis-1-ipv4]summary 172.16.0.0 22 level-2
[RTC-isis-1-ipv4]quit
[RTC-isis-1]domain-authentication-mode simple plain 123
[RTC-isis-1]quit
[RTC]int s1/0
[RTC-Serial1/0]isis authentication-mode simple plain 123

RTD:

[RTD]isis
[RTD-isis-1]network-entity 20.0000.0000.0004.00
[RTD-isis-1]is-level level-1
[RTD-isis-1]quit
[RTD]int g0/0
[RTD-GigabitEthernet0/0]isis enable 1
[RTD-GigabitEthernet0/1]int s1/0
[RTD-Serial1/0]isis enable 1
[RTD-Serial1/0]quit
[RTD]isis
[RTD-isis-1]cost-style wide
[RTD-isis-1]bandwidth-reference 1000
[RTD-isis-1]auto-cost enable
[RTD-isis-1] quit
[RTD]isis
[RTD-isis-1]domain-authentication-mode simple plain 123
[RTD-isis-1]quit
[RTD]int s1/0
[RTD-Serial1/0]isis authentication-mode simple plain 123

注：要是配置好后无法互联。可能是端口处于关闭状态，我是将设备配置保存好后重启设备解决的