#include <iostream>
using namespace std;
int main() {
/*
*1.编写一个小程序,要求用户使用一个整数指出自己的身高(单位为英寸),
然后将身高转换为英尺,该程序使用下划线字符来指示输入位置。
另外,使用一个const符号来表示转换因子。 1ft = 12in
*/
const double x1 = 12.0;
double m_h, x_h;
cin >> m_h;
x_h = m_h / x1;
cout <<"您的身高为" << x_h<<"英尺"<<endl;
/*
2.编写一个程序,要求以几英尺几英寸的方式输入其身高,并以磅为单位输入其体重。
(使用3个变量来存储这些信息。)
该程序报告其BMI(Body Mass Index ,体重指数)。
为了计算BMI,该程序以英寸的方式指出用户的身高(一英尺为十二英寸),
并将以英寸为单位的身高身高转换为以米为单位的身高(1英寸=0.0254米)。然后,将以磅为单位的体重转换为千克为单位的体重(1千克=2.2磅)。
最后,计算相应的BMI-体重(千克)除以身高(米)的平方。用符号常量表示各种转换因子。
*/
const double x2 = 0.0254;
const double x3 = 2.2;
double y_c, y_cun, weight;
double BMI;
cout << "请输入您的身高英尺英寸:" << endl;
cin >> y_c;
cin >> y_cun;
cout << "请输入您的体重(磅):" << endl;
cin >> weight;
BMI = (x3 * weight) / (((y_c * 12 + y_cun) / 0.0254) * ((y_c * 12 + y_cun) / 0.0254));
/*
3.编写一个程序,要求用户以度分秒的方式输入一个纬度,
然后以度为单位显示该纬度。1度为60分,1分等于60秒,
请以符号常量的方式表示这些值。
对于每个输入值,应使用一个独立的变量存储它。下面是该程序运行时的情况:
Enter a latitude in degrees,minutes,and seconds:
First,enter the degrees:37
Next,enter the minutes of arc:51
Finally,enter the seconds of arc:19
37 degrees,51 minutes,19 seconds =37.8553 degrees
*/
int du, min, second;
double x;
cout << "Enter a latitude in degrees,minutes,and seconds:" << endl;
cout << "First,enter the degrees:";
cin >> du;
cout << "Next,enter the minutes of arc:";
cin >> min;
cout << "Finally,enter the seconds of arc:";
cin >> second;
x = du + min / 60.0 + second / 60.0 / 60.0;
cout << du << " degrees," << min << " minutes," << second << " seconds " << "=" << x << " degrees";
/*
4.编写一个程序,要求用户以整数方式输入秒数(使用long或long long变量存储),
然后以天、小时、分钟和秒的方式显示这段时间。使用符号常量来表示每天有多少小时、每小时有多少分钟以及每分钟有多少秒。
该程序的输出应与下面类似:
Enter the number of seconds:3160000
3160000 seconds = 365 days,17 hours,46 minutes,40 seconds
*/
const int Sec_per_min = 60;
const int Min_per_hour = 60;
const int Hour_per_day = 24;
cout <<endl<< "Enter the number of seconds:";
long long total_sec;
cin >> total_sec;
int sec = total_sec % Sec_per_min; //s
int total_min = total_sec / Sec_per_min;//一共多少分钟
int min1 = total_min % Min_per_hour; //min
int total_hour = total_min / Min_per_hour;
int hour = total_hour % Hour_per_day;
int day = total_hour / Hour_per_day;
cout << total_sec << " seconds = " << day << " days," << hour << " hours," << min1 << " minutes," << sec << " seconds";
/*
5.编写一个程序,要求用户输入全球当前的人口和美国当前的人口(或其他国家的人口)。
将这些信息存储在long long变量中,并让程序显示美国(或其他国家)的人口占全球人口的百分比。该程序的输出与下面类似:
Enter the world's population:6898758899
Enter the population of the US:310783781
The population of the US is 4.50492% of the world population.
*/
long long total_p, total_m;
double con;
cout <<endl<< "Enter the world's population:";
cin >> total_p;
cout << "Enter the population of the US:";
cin >> total_m;
con = double(total_m) / double(total_p);
cout << "The population of the US is " << con * 100 << "%" << " of the world population.";
/*
6.编写一个程序,要求用户输入驱车里程(英里)和使用汽油量(加仑),
然后指出汽车耗油量为一加仑的里程。如果愿意,也可以让程序要求用户以公里为单位输入距离,并以升为单位输入汽油量,
然后指出欧洲风格的结果-即每100公里的耗油量(升)。
*/
cout << "Please enter the distance(miles):";
double distance;
cin >> distance;
cout << "Please enter volume of gasoline(gallon):";
double volume;
cin >> volume;
cout << "You can run " << distance / volume << " miles per gallon" << endl;
/*
7.编写一个程序,要求每个用户按欧洲风格输入汽车的耗油量(每100公里消耗汽油量(升 )),
然后将其转换为美国风格的耗油量-每加仑多少英里。注意,除了使用不同的单位计量外,美国方法(距离/燃料)与欧洲方法(燃料/距离)相反。
100公里等于62.14英里,1加仑等于3.875升。因此,19mpg大约合12.41/100km,127mpg大约合8.71/100km。
*/
cout << "Please enter fuel consumption per 100 km(UN):";
double UN;
cin >> UN;
cout << " Gallons per mile(US) : " << 1 / UN * 62.14 * 3.875;
}
C++Primer Plus6编程题(第三章)
最新推荐文章于 2024-05-26 21:22:52 发布