学习华为HCIA的第一天

最新推荐文章于 2023-07-02 12:57:01 发布

mjywl2003

最新推荐文章于 2023-07-02 12:57:01 发布

阅读量247

点赞数 1

分类专栏：路由配置网络拓扑图 ENSP 文章标签：学习华为网络网络协议服务器

本文链接：https://blog.csdn.net/qq_62466609/article/details/129795716

版权

ENSP 同时被 3 个专栏收录

18 篇文章 14 订阅

订阅专栏

网络拓扑图

15 篇文章 13 订阅

订阅专栏

路由配置

9 篇文章 0 订阅

订阅专栏

直连链路得配置：

1.实验拓扑:

实验配置:

R1:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys AR1
[AR1]int l	
[AR1]int LoopBack 0
[AR1-LoopBack0]ip ad	
[AR1-LoopBack0]ip address 1.1.1.1 32
[AR1-LoopBack0]q
[AR1]int g0/0/0
[AR1-GigabitEthernet0/0/0]ip ad	
[AR1-GigabitEthernet0/0/0]ip address 12.1.1.1 24
Mar 27 2023 15:05:38-08:00 AR1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
 on the interface GigabitEthernet0/0/0 has entered the UP state. 
[AR1-GigabitEthernet0/0/0]q
[AR1]
[AR1]
[AR1]q

R2:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys AR2
[AR2]int l	
[AR2]int LoopBack 0
[AR2-LoopBack0]ip ad	
[AR2-LoopBack0]ip address 2.2.2.2 32
[AR2-LoopBack0]q
[AR2]int g0/0/0
[AR2-GigabitEthernet0/0/0]ip ad	
[AR2-GigabitEthernet0/0/0]ip address 12.1.1.2 24
Mar 27 2023 15:06:23-08:00 AR2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
 on the interface GigabitEthernet0/0/0 has entered the UP state. 
[AR2-GigabitEthernet0/0/0]q
[AR2]int g0/0/1
[AR2-GigabitEthernet0/0/1]ip ad	
[AR2-GigabitEthernet0/0/1]ip address 23.1.1.2
                                              ^
Error:Incomplete command found at '^' position.
[AR2-GigabitEthernet0/0/1]ip address 23.1.1.2 24
Mar 27 2023 15:06:52-08:00 AR2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
 on the interface GigabitEthernet0/0/1 has entered the UP state. 
[AR2-GigabitEthernet0/0/1]
[AR2-GigabitEthernet0/0/1]
[AR2-GigabitEthernet0/0/1]q

R3:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys AR3
[AR3]int g0/0/0
[AR3-GigabitEthernet0/0/0]ip ad	
[AR3-GigabitEthernet0/0/0]ip address 23.1.1.3 24
Mar 27 2023 15:07:12-08:00 AR3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
 on the interface GigabitEthernet0/0/0 has entered the UP state. 
[AR3-GigabitEthernet0/0/0]int l	
[AR3-GigabitEthernet0/0/0]int l
[AR3-GigabitEthernet0/0/0]int loo	
[AR3-GigabitEthernet0/0/0]q
[AR3]int l	
[AR3]int LoopBack 0
[AR3-LoopBack0]ip ad	
[AR3-LoopBack0]ip address 3.3.3.3 32
[AR3-LoopBack0]q
[AR3]
[AR3]
[AR3]

测试结果: