蓝桥杯串口

最新推荐文章于 2024-07-20 22:33:40 发布

亮～803

最新推荐文章于 2024-07-20 22:33:40 发布

阅读量85

点赞数 2

文章标签：蓝桥杯职场和发展

本文链接：https://blog.csdn.net/qq_63264354/article/details/137699236

版权

本文详细描述了一个使用C语言编写的嵌入式程序，涉及UART通信的初始化、数据发送以及对HC573继电器的控制。程序还包括中断服务函数处理来自串口的命令并执行相应的操作。

摘要由CSDN通过智能技术生成

#include "reg52.h"

sfr AUXR = 0x8e;

unsigned char urdat;

void SendByte(unsigned char dat);

void InitUart()
{
	TMOD = 0x20;
	TH1 = 0xfd;
	TL1 = 0xfd;
	TR1 = 1;
	
	SCON = 0x50;
	AUXR = 0x00;
	
	ES = 1;
	EA = 1;
}

void ServiceUart() interrupt 4
{
	if(RI == 1)
	{
		RI = 0;
		urdat = SBUF; 
		SendByte(urdat + 1);
	}
}

void SendByte(unsigned char dat)
{
	SBUF = dat;
	while(TI == 0);
	TI = 0;
}

void main()
{
	InitUart();
	SendByte(0x5a);
	SendByte(0xa5);
	while(1);
}






#include "reg52.h"

sfr AUXR = 0x8e;

void SelectHC573(unsigned char channel)
{
	switch(channel)
	{
		case 4:
			P2 = (P2 & 0x1f) | 0x80;
		break;
		case 5:
			P2 = (P2 & 0x1f) | 0xa0;
		break;
		case 6:
			P2 = (P2 & 0x1f) | 0xc0;
		break;
		case 7:
			P2 = (P2 & 0x1f) | 0xe0;
		break;
		case 0:
			P2 = (P2 & 0x1f) | 0x00;
		break;
	}
}

void InitSystem()
{
	SelectHC573(5);
	P0 = 0x00;
	SelectHC573(4);
	P0 = 0xff;
}

//=======================================
void InitUart()
{
	TMOD = 0x20;
	TH1 = 0xfd;
	TL1 = 0xfd;
	TR1 = 1;
	
	SCON = 0x50;
	AUXR = 0x00;
	
	ES = 1;
	EA = 1;
}

unsigned char command = 0x00;
void ServiceUart() interrupt 4
{
	if(RI == 1)
	{
		command = SBUF;
		RI = 0;
	}
}

void SendByte(unsigned char dat)
{
	SBUF = dat;
	while(TI == 0);
	TI = 0;
}

void SendString(unsigned char *str)
{
	while(*str != '\0')
	{
		SendByte(*str++);
	}
}
//=======================================
void Working()
{
	if(command != 0x00)
	{
		switch(command & 0xf0)
		{
			case 0xa0:
				P0 = (P0 | 0x0f) & (~command | 0xf0);
				command = 0x00;
			break;
			
			case 0xb0:
				P0 = (P0 | 0xf0) & ((~command << 4)| 0x0f);
				command = 0x00;
			break;
			
			case 0xc0:
				SendString("The System is Running...\r\n");
				command = 0x00;
			break;
		}
	}
}

void main()
{
	InitSystem();
	InitUart();
	SendString("Welcome to XMF system!\r\n");
	while(1)
	{
		Working();
	}
}