R1-R2之间为HDLC封装:
R1上的配置:
[R1]int s4/0/0
[R1-Serial4/0/0]ip add 12.1.1.1 24
[R1-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
R2上的配置
[ISP]int s4/0/0
[ISP-Serial4/0/0]ip add 12.1.1.2 24
[ISP-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
R2-R3之间为ppp封装,pap认证,R2为主认证方
R2上配置:
[ISP]aaa
[ISP-aaa]local-user ch password cipher 123456
[ISP-aaa]local-user ch service-type ppp
[ISP]int s4/0/1
[ISP-Serial4/0/1]ppp authentication-mode pap
R3上配置:
[R3]int s4/0/0
[R3-Serial4/0/0]ppp pap local-user xiao password cipher 123456
R2-R4之间为ppp封装,chap认证,R2为主认证方
R2上配置:
[ISP-aaa]local-user ch service-type ppp
[ISP]int s3/0/0
[ISP-Serial3/0/0]ppp authentication-mode chap
R4上配置:
[R4]int s4/0/0
[R4-Serial4/0/0]ppp chap user ch
[R4-Serial4/0/0]ppp chap password cipher 123456
R1、R2、R3构建MGRE环境,仅R1IP地址固定
[R1]rip
[R1-rip-1]version 2
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 192.168.4.0
[R1-Tunnel0/0/0]undo rip split-horizon
[R3]rip
[R3-rip-1]version 2
[R3-rip-1]network 192.168.4.0
[R3-rip-1]network 192.168.2.0
[R2]rip
[R4-rip-1]version 2
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 192.168.5.0
结果验证