ubuntu 18.04 +anconda+spyder+tensorflow

最新推荐文章于 2024-04-15 17:45:00 发布

哈哈哈，冲冲冲

最新推荐文章于 2024-04-15 17:45:00 发布

阅读量6.8k

点赞数 3

文章标签： ubuntu tensorflow

本文链接：https://blog.csdn.net/qzzzxiaosheng/article/details/99676187

版权

xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ cd Desktop
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~/Desktop$ bash Anaconda3-5.2.0-Linux-x86_64.sh

Welcome to Anaconda3 5.2.0

In order to continue the installation process, please review the license
agreement.
Please, press ENTER to continue

===================================
Anaconda End User License Agreement

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, th
is list of conditions and the following disclaimer in the documentation and/or o
ther materials provided with the distribution.
Neither the name of Anaconda, Inc. (“Anaconda, Inc.”) nor the names of its c
ontributors may be used to endorse or promote products derived from this softwar
e without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WA
RRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL ANACONDA, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL
, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, P
ROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BU
SINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN C
ONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING I
N ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

Notice of Third Party Software Licenses

Anaconda Distribution contains open source software packages from third parties.
These are available on an “as is” basis and subject to their individual license
agreements. These licenses are available in Anaconda Distribution or at http://
docs.anaconda.com/anaconda/pkg-docs. Any binary packages of these third party to
ols you obtain via Anaconda Distribution are subject to their individual license
s as well as the Anaconda license. Anaconda, Inc. reserves the right to change w
hich third party tools are provided in Anaconda Distribution.

In particular, Anaconda Distribution contains re-distributable, run-time, shared
-library files from the Intel™ Math Kernel Library (“MKL binaries”). You are
specifically authorized to use the MKL binaries with your installation of Anacon
da Distribution. You are also authorized to redistribute the MKL binaries with A
naconda Distribution or in the conda package that contains them. Use and redistr
ibution of the MKL binaries are subject to the licensing terms located at https:
//software.intel.com/en-us/license/intel-simplified-software-license. If needed,
instructions for removing the MKL binaries after installation of Anaconda Distr
ibution are available at http://www.anaconda.com.

Anaconda Distribution also contains cuDNN software binaries from NVIDIA Corporat
ion (“cuDNN binaries”). You are specifically authorized to use the cuDNN binarie
s with your installation of Anaconda Distribution. You are also authorized to re
distribute the cuDNN binaries with an Anaconda Distribution package that contain
s them. If needed, instructions for removing the cuDNN binaries after installati
on of Anaconda Distribution are available at http://www.anaconda.com.

Anaconda Distribution also contains Visual Studio Code software binaries from Mi
crosoft Corporation (“VS Code”). You are specifically authorized to use VS Code
with your installation of Anaconda Distribution. Use of VS Code is subject to th
e licensing terms located at https://code.visualstudio.com/License.

Cryptography Notice

This distribution includes cryptographic software. The country in which you curr
ently reside may have restrictions on the import, possession, use, and/or re-exp
ort to another country, of encryption software. BEFORE using any encryption soft
ware, please check your country’s laws, regulations and policies concerning the
import, possession, or use, and re-export of encryption software, to see if this
is permitted. See the Wassenaar Arrangement http://www.wassenaar.org/ for more
information.

Anaconda, Inc. has self-classified this software as Export Commodity Control Num
ber (ECCN) 5D992b, which includes mass market information security software usin
g or performing cryptographic functions with asymmetric algorithms. No license i
s required for export of this software to non-embargoed countries. In addition,
the Intel™ Math Kernel Library contained in Anaconda, Inc.'s software is clas
sified by Intel™ as ECCN 5D992b with no license required for export to non-em
bargoed countries and Microsoft’s Visual Studio Code software is classified by M
icrosoft as ECCN 5D992.c with no license required for export to non-embargoed co
untries.

The following packages are included in this distribution that relate to cryptogr
aphy:

openssl
The OpenSSL Project is a collaborative effort to develop a robust, commercia
l-grade, full-featured, and Open Source toolkit implementing the Transport Layer
Security (TLS) and Secure Sockets Layer (SSL) protocols as well as a full-stren
gth general purpose cryptography library.

pycrypto
A collection of both secure hash functions (such as SHA256 and RIPEMD160), a
nd various encryption algorithms (AES, DES, RSA, ElGamal, etc.).

pyopenssl
A thin Python wrapper around (a subset of) the OpenSSL library.

kerberos (krb5, non-Windows platforms)
A network authentication protocol designed to provide strong authentication
for client/server applications by using secret-key cryptography.

cryptography
A Python library which exposes cryptographic recipes and primitives.

Do you accept the license terms? [yes|no]
[no] >>>
Please answer ‘yes’ or ‘no’:’

Please answer ‘yes’ or ‘no’:’

yes

Anaconda3 will now be installed into this location:
/home/xiaozhen/anaconda3

Press ENTER to confirm the location
Press CTRL-C to abort the installation
Or specify a different location below

[/home/xiaozhen/anaconda3] >>>
PREFIX=/home/xiaozhen/anaconda3
installing: python-3.6.5-hc3d631a_2 …
Python 3.6.5 :: Anaconda, Inc.
installing: blas-1.0-mkl …
installing: ca-certificates-2018.03.07-0 …
installing: conda-env-2.6.0-h36134e3_1 …
installing: intel-openmp-2018.0.0-8 …
installing: libgcc-ng-7.2.0-hdf63c60_3 …
installing: libgfortran-ng-7.2.0-hdf63c60_3 …
installing: libstdcxx-ng-7.2.0-hdf63c60_3 …
installing: bzip2-1.0.6-h14c3975_5 …
installing: expat-2.2.5-he0dffb1_0 …
installing: gmp-6.1.2-h6c8ec71_1 …
installing: graphite2-1.3.11-h16798f4_2 …
installing: icu-58.2-h9c2bf20_1 …
installing: jbig-2.1-hdba287a_0 …
installing: jpeg-9b-h024ee3a_2 …
installing: libffi-3.2.1-hd88cf55_4 …
installing: libsodium-1.0.16-h1bed415_0 …
installing: libtool-2.4.6-h544aabb_3 …
installing: libxcb-1.13-h1bed415_1 …
installing: lzo-2.10-h49e0be7_2 …
installing: mkl-2018.0.2-1 …
installing: ncurses-6.1-hf484d3e_0 …
installing: openssl-1.0.2o-h20670df_0 …
installing: patchelf-0.9-hf79760b_2 …
installing: pcre-8.42-h439df22_0 …
installing: pixman-0.34.0-hceecf20_3 …
installing: snappy-1.1.7-hbae5bb6_3 …
installing: tk-8.6.7-hc745277_3 …
installing: unixodbc-2.3.6-h1bed415_0 …
installing: xz-5.2.4-h14c3975_4 …
installing: yaml-0.1.7-had09818_2 …
installing: zlib-1.2.11-ha838bed_2 …
installing: blosc-1.14.3-hdbcaa40_0 …
installing: glib-2.56.1-h000015b_0 …
installing: hdf5-1.10.2-hba1933b_1 …
installing: libedit-3.1.20170329-h6b74fdf_2 …
installing: libpng-1.6.34-hb9fc6fc_0 …
installing: libssh2-1.8.0-h9cfc8f7_4 …
installing: libtiff-4.0.9-he85c1e1_1 …
installing: libxml2-2.9.8-h26e45fe_1 …
installing: mpfr-3.1.5-h11a74b3_2 …
installing: pandoc-1.19.2.1-hea2e7c5_1 …
installing: readline-7.0-ha6073c6_4 …
installing: zeromq-4.2.5-h439df22_0 …
installing: dbus-1.13.2-h714fa37_1 …
installing: freetype-2.8-hab7d2ae_1 …
installing: gstreamer-1.14.0-hb453b48_1 …
installing: libcurl-7.60.0-h1ad7b7a_0 …
installing: libxslt-1.1.32-h1312cb7_0 …
installing: mpc-1.0.3-hec55b23_5 …
installing: sqlite-3.23.1-he433501_0 …
installing: curl-7.60.0-h84994c4_0 …
installing: fontconfig-2.12.6-h49f89f6_0 …
installing: gst-plugins-base-1.14.0-hbbd80ab_1 …
installing: alabaster-0.7.10-py36h306e16b_0 …
installing: asn1crypto-0.24.0-py36_0 …
installing: attrs-18.1.0-py36_0 …
installing: backcall-0.1.0-py36_0 …
installing: backports-1.0-py36hfa02d7e_1 …
installing: beautifulsoup4-4.6.0-py36h49b8c8c_1 …
installing: bitarray-0.8.1-py36h14c3975_1 …
installing: boto-2.48.0-py36h6e4cd66_1 …
installing: cairo-1.14.12-h7636065_2 …
installing: certifi-2018.4.16-py36_0 …
installing: chardet-3.0.4-py36h0f667ec_1 …
installing: click-6.7-py36h5253387_0 …
installing: cloudpickle-0.5.3-py36_0 …
installing: colorama-0.3.9-py36h489cec4_0 …
installing: contextlib2-0.5.5-py36h6c84a62_0 …
installing: dask-core-0.17.5-py36_0 …
installing: decorator-4.3.0-py36_0 …
installing: docutils-0.14-py36hb0f60f5_0 …
installing: entrypoints-0.2.3-py36h1aec115_2 …
installing: et_xmlfile-1.0.1-py36hd6bccc3_0 …
installing: fastcache-1.0.2-py36h14c3975_2 …
installing: filelock-3.0.4-py36_0 …
installing: glob2-0.6-py36he249c77_0 …
installing: gmpy2-2.0.8-py36hc8893dd_2 …
installing: greenlet-0.4.13-py36h14c3975_0 …
installing: heapdict-1.0.0-py36_2 …
installing: idna-2.6-py36h82fb2a8_1 …
installing: imagesize-1.0.0-py36_0 …
installing: ipython_genutils-0.2.0-py36hb52b0d5_0 …
installing: itsdangerous-0.24-py36h93cc618_1 …
installing: jdcal-1.4-py36_0 …
installing: kiwisolver-1.0.1-py36h764f252_0 …
installing: lazy-object-proxy-1.3.1-py36h10fcdad_0 …
installing: llvmlite-0.23.1-py36hdbcaa40_0 …
installing: locket-0.2.0-py36h787c0ad_1 …
installing: lxml-4.2.1-py36h23eabaa_0 …
installing: markupsafe-1.0-py36hd9260cd_1 …
installing: mccabe-0.6.1-py36h5ad9710_1 …
installing: mistune-0.8.3-py36h14c3975_1 …
installing: mkl-service-1.1.2-py36h17a0993_4 …
installing: mpmath-1.0.0-py36hfeacd6b_2 …
installing: msgpack-python-0.5.6-py36h6bb024c_0 …
installing: multipledispatch-0.5.0-py36_0 …
installing: numpy-base-1.14.3-py36h9be14a7_1 …
installing: olefile-0.45.1-py36_0 …
installing: pandocfilters-1.4.2-py36ha6701b7_1 …
installing: parso-0.2.0-py36_0 …
installing: path.py-11.0.1-py36_0 …
installing: pep8-1.7.1-py36_0 …
installing: pickleshare-0.7.4-py36h63277f8_0 …
installing: pkginfo-1.4.2-py36_1 …
installing: pluggy-0.6.0-py36hb689045_0 …
installing: ply-3.11-py36_0 …
installing: psutil-5.4.5-py36h14c3975_0 …
installing: ptyprocess-0.5.2-py36h69acd42_0 …
installing: py-1.5.3-py36_0 …
installing: pycodestyle-2.4.0-py36_0 …
installing: pycosat-0.6.3-py36h0a5515d_0 …
installing: pycparser-2.18-py36hf9f622e_1 …
installing: pycrypto-2.6.1-py36h14c3975_8 …
installing: pycurl-7.43.0.1-py36hb7f436b_0 …
installing: pyodbc-4.0.23-py36hf484d3e_0 …
installing: pyparsing-2.2.0-py36hee85983_1 …
installing: pysocks-1.6.8-py36_0 …
installing: pytz-2018.4-py36_0 …
installing: pyyaml-3.12-py36hafb9ca4_1 …
installing: pyzmq-17.0.0-py36h14c3975_0 …
installing: qt-5.9.5-h7e424d6_0 …
installing: qtpy-1.4.1-py36_0 …
installing: rope-0.10.7-py36h147e2ec_0 …
installing: ruamel_yaml-0.15.35-py36h14c3975_1 …
installing: send2trash-1.5.0-py36_0 …
installing: simplegeneric-0.8.1-py36_2 …
installing: sip-4.19.8-py36hf484d3e_0 …
installing: six-1.11.0-py36h372c433_1 …
installing: snowballstemmer-1.2.1-py36h6febd40_0 …
installing: sortedcontainers-1.5.10-py36_0 …
installing: sphinxcontrib-1.0-py36h6d0f590_1 …
installing: sqlalchemy-1.2.7-py36h6b74fdf_0 …
installing: tblib-1.3.2-py36h34cf8b6_0 …
installing: testpath-0.3.1-py36h8cadb63_0 …
installing: toolz-0.9.0-py36_0 …
installing: tornado-5.0.2-py36_0 …
installing: typing-3.6.4-py36_0 …
installing: unicodecsv-0.14.1-py36ha668878_0 …
installing: wcwidth-0.1.7-py36hdf4376a_0 …
installing: webencodings-0.5.1-py36h800622e_1 …
installing: werkzeug-0.14.1-py36_0 …
installing: wrapt-1.10.11-py36h28b7045_0 …
installing: xlrd-1.1.0-py36h1db9f0c_1 …
installing: xlsxwriter-1.0.4-py36_0 …
installing: xlwt-1.3.0-py36h7b00a1f_0 …
installing: babel-2.5.3-py36_0 …
installing: backports.shutil_get_terminal_size-1.0.0-py36hfea85ff_2 …
installing: cffi-1.11.5-py36h9745a5d_0 …
installing: conda-verify-2.0.0-py36h98955d8_0 …
installing: cycler-0.10.0-py36h93f1223_0 …
installing: cytoolz-0.9.0.1-py36h14c3975_0 …
installing: harfbuzz-1.7.6-h5f0a787_1 …
installing: html5lib-1.0.1-py36h2f9c1c0_0 …
installing: jedi-0.12.0-py36_1 …
installing: more-itertools-4.1.0-py36_0 …
installing: networkx-2.1-py36_0 …
installing: nltk-3.3.0-py36_0 …
installing: openpyxl-2.5.3-py36_0 …
installing: packaging-17.1-py36_0 …
installing: partd-0.3.8-py36h36fd896_0 …
installing: pathlib2-2.3.2-py36_0 …
installing: pexpect-4.5.0-py36_0 …
installing: pillow-5.1.0-py36h3deb7b8_0 …
installing: pyqt-5.9.2-py36h751905a_0 …
installing: python-dateutil-2.7.3-py36_0 …
installing: qtawesome-0.4.4-py36h609ed8c_0 …
installing: setuptools-39.1.0-py36_0 …
installing: singledispatch-3.4.0.3-py36h7a266c3_0 …
installing: sortedcollections-0.6.1-py36_0 …
installing: sphinxcontrib-websupport-1.0.1-py36hb5cb234_1 …
installing: sympy-1.1.1-py36hc6d1c1c_0 …
installing: terminado-0.8.1-py36_1 …
installing: traitlets-4.3.2-py36h674d592_0 …
installing: zict-0.1.3-py36h3a3bf81_0 …
installing: astroid-1.6.3-py36_0 …
installing: bleach-2.1.3-py36_0 …
installing: clyent-1.2.2-py36h7e57e65_1 …
installing: cryptography-2.2.2-py36h14c3975_0 …
installing: cython-0.28.2-py36h14c3975_0 …
installing: distributed-1.21.8-py36_0 …
installing: get_terminal_size-1.0.0-haa9412d_0 …
installing: gevent-1.3.0-py36h14c3975_0 …
installing: isort-4.3.4-py36_0 …
installing: jinja2-2.10-py36ha16c418_0 …
installing: jsonschema-2.6.0-py36h006f8b5_0 …
installing: jupyter_core-4.4.0-py36h7c827e3_0 …
installing: navigator-updater-0.2.1-py36_0 …
installing: nose-1.3.7-py36hcdf7029_2 …
installing: pango-1.41.0-hd475d92_0 …
installing: pyflakes-1.6.0-py36h7bd6a15_0 …
installing: pygments-2.2.0-py36h0d3125c_0 …
installing: pytest-3.5.1-py36_0 …
installing: wheel-0.31.1-py36_0 …
installing: flask-1.0.2-py36_1 …
installing: jupyter_client-5.2.3-py36_0 …
installing: nbformat-4.4.0-py36h31c9010_0 …
installing: pip-10.0.1-py36_0 …
installing: prompt_toolkit-1.0.15-py36h17d85b1_0 …
installing: pylint-1.8.4-py36_0 …
installing: pyopenssl-18.0.0-py36_0 …
installing: pytest-openfiles-0.3.0-py36_0 …
installing: pytest-remotedata-0.2.1-py36_0 …
installing: flask-cors-3.0.4-py36_0 …
installing: ipython-6.4.0-py36_0 …
installing: nbconvert-5.3.1-py36hb41ffb7_0 …
installing: urllib3-1.22-py36hbe7ace6_0 …
installing: ipykernel-4.8.2-py36_0 …
installing: requests-2.18.4-py36he2e5f8d_1 …
installing: anaconda-client-1.6.14-py36_0 …
installing: jupyter_console-5.2.0-py36he59e554_1 …
installing: notebook-5.5.0-py36_0 …
installing: qtconsole-4.3.1-py36h8f73b5b_0 …
installing: sphinx-1.7.4-py36_0 …
installing: anaconda-navigator-1.8.7-py36_0 …
installing: anaconda-project-0.8.2-py36h44fb852_0 …
installing: jupyterlab_launcher-0.10.5-py36_0 …
installing: numpydoc-0.8.0-py36_0 …
installing: widgetsnbextension-3.2.1-py36_0 …
installing: ipywidgets-7.2.1-py36_0 …
installing: jupyterlab-0.32.1-py36_0 …
installing: spyder-3.2.8-py36_0 …
installing: _ipyw_jlab_nb_ext_conf-0.1.0-py36he11e457_0 …
installing: jupyter-1.0.0-py36_4 …
installing: bokeh-0.12.16-py36_0 …
installing: bottleneck-1.2.1-py36haac1ea0_0 …
installing: conda-4.5.4-py36_0 …
installing: conda-build-3.10.5-py36_0 …
installing: datashape-0.5.4-py36h3ad6b5c_0 …
installing: h5py-2.7.1-py36ha1f6525_2 …
installing: imageio-2.3.0-py36_0 …
installing: matplotlib-2.2.2-py36h0e671d2_1 …
installing: mkl_fft-1.0.1-py36h3010b51_0 …
installing: mkl_random-1.0.1-py36h629b387_0 …
installing: numpy-1.14.3-py36hcd700cb_1 …
installing: numba-0.38.0-py36h637b7d7_0 …
installing: numexpr-2.6.5-py36h7bf3b9c_0 …
installing: pandas-0.23.0-py36h637b7d7_0 …
installing: pytest-arraydiff-0.2-py36_0 …
installing: pytest-doctestplus-0.1.3-py36_0 …
installing: pywavelets-0.5.2-py36he602eb0_0 …
installing: scipy-1.1.0-py36hfc37229_0 …
installing: bkcharts-0.2-py36h735825a_0 …
installing: dask-0.17.5-py36_0 …
installing: patsy-0.5.0-py36_0 …
installing: pytables-3.4.3-py36h02b9ad4_2 …
installing: pytest-astropy-0.3.0-py36_0 …
installing: scikit-learn-0.19.1-py36h7aa7ec6_0 …
installing: astropy-3.0.2-py36h3010b51_1 …
installing: odo-0.5.1-py36h90ed295_0 …
installing: scikit-image-0.13.1-py36h14c3975_1 …
installing: statsmodels-0.9.0-py36h3010b51_0 …
installing: blaze-0.11.3-py36h4e06776_0 …
installing: seaborn-0.8.1-py36hfad7ec4_0 …
installing: anaconda-5.2.0-py36_3 …
installation finished.
Do you wish the installer to prepend the Anaconda3 install location
to PATH in your /home/xiaozhen/.bashrc ? [yes|no]
[no] >>> yes

Appending source /home/xiaozhen/anaconda3/bin/activate to /home/xiaozhen/.bashrc
A backup will be made to: /home/xiaozhen/.bashrc-anaconda3.bak

For this change to become active, you have to open a new terminal.

Thank you for installing Anaconda3!

===========================================================================

Anaconda is partnered with Microsoft! Microsoft VSCode is a streamlined
code editor with support for development operations like debugging, task
running and version control.

To install Visual Studio Code, you will need:

Administrator Privileges
Internet connectivity

Visual Studio Code License: https://code.visualstudio.com/license

Do you wish to proceed with the installation of Microsoft VSCode? [yes|no]

no
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~/Desktop$ conda list
conda: command not found
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~/Desktop$ sudo gedit /etc/profile
[sudo] password for xiaozhen:

** (gedit:8811): WARNING **: 11:56:37.050: Set document metadata failed: Setting attribute metadata::gedit-spell-language not supported

** (gedit:8811): WARNING **: 11:56:37.050: Set document metadata failed: Setting attribute metadata::gedit-encoding not supported

** (gedit:8811): WARNING **: 11:56:38.179: Set document metadata failed: Setting attribute metadata::gedit-position not supported
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~/Desktop$

xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ conda list

packages in environment at /home/xiaozhen/anaconda3:

xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ anaconda -V
anaconda Command line client (version 1.6.14)
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip -V
pip 10.0.1 from /home/xiaozhen/anaconda3/lib/python3.6/site-packages/pip (python 3.6)
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ spyder
Segmentation fault (core dumped)
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip3 install pyopengl

Command ‘pip3’ not found, but can be installed with:

sudo apt install python3-pip

xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ sudo apt install python3-pip[sudo] password for xiaozhen:
Reading package lists… Done
Building dependency tree
Reading state information… Done
The following additional packages will be installed:
dh-python libpython3-dev libpython3.6 libpython3.6-dev libpython3.6-minimal
libpython3.6-stdlib python3-dev python3-distutils python3-lib2to3
python3-setuptools python3-wheel python3.6 python3.6-dev python3.6-minimal
Suggested packages:
python-setuptools-doc python3.6-venv python3.6-doc binfmt-support
The following NEW packages will be installed:
dh-python libpython3-dev libpython3.6-dev python3-dev python3-distutils
python3-lib2to3 python3-pip python3-setuptools python3-wheel python3.6-dev
The following packages will be upgraded:
libpython3.6 libpython3.6-minimal libpython3.6-stdlib python3.6
python3.6-minimal
5 upgraded, 10 newly installed, 0 to remove and 438 not upgraded.
Need to get 51.5 MB of archives.
After this operation, 81.5 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 libpython3.6 amd64 3.6.8-1~18.04.1 [1,418 kB]
Get:2 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 python3.6 amd64 3.6.8-1~18.04.1 [202 kB]
Get:3 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 python3.6-minimal amd64 3.6.8-1~18.04.1 [1,620 kB]
Get:4 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 libpython3.6-stdlib amd64 3.6.8-1~18.04.1 [1,715 kB]
Get:5 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 libpython3.6-minimal amd64 3.6.8-1~18.04.1 [533 kB]
Get:6 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 python3-lib2to3 all 3.6.8-1~18.04 [76.5 kB]
Get:7 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 python3-distutils all 3.6.8-1~18.04 [141 kB]
Get:8 http://mirrors.aliyun.com/ubuntu bionic/main amd64 dh-python all 3.20180325ubuntu2 [89.2 kB]
Get:9 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 libpython3.6-dev amd64 3.6.8-1~18.04.1 [44.8 MB]
Get:10 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 libpython3-dev amd64 3.6.7-1~18.04 [7,328 B]
Get:11 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 python3.6-dev amd64 3.6.8-1~18.04.1 [508 kB]
Get:12 http://mirrors.aliyun.com/ubuntu bionic-updates/main amd64 python3-dev amd64 3.6.7-1~18.04 [1,288 B]
Get:13 http://mirrors.aliyun.com/ubuntu bionic-updates/universe amd64 python3-pip all 9.0.1-2.3~ubuntu1.18.04.1 [114 kB]
Get:14 http://mirrors.aliyun.com/ubuntu bionic/main amd64 python3-setuptools all 39.0.1-2 [248 kB]
Get:15 http://mirrors.aliyun.com/ubuntu bionic/universe amd64 python3-wheel all 0.30.0-0.2 [36.5 kB]
Fetched 51.5 MB in 9s (5,539 kB/s)
(Reading database … 133145 files and directories currently installed.)
Preparing to unpack …/00-libpython3.6_3.6.8-1~18.04.1_amd64.deb …
Unpacking libpython3.6:amd64 (3.6.8-1~18.04.1) over (3.6.7-1~18.04) …
Preparing to unpack …/01-python3.6_3.6.8-1~18.04.1_amd64.deb …
Unpacking python3.6 (3.6.8-1~18.04.1) over (3.6.7-1~18.04) …
Preparing to unpack …/02-python3.6-minimal_3.6.8-1~18.04.1_amd64.deb …
Unpacking python3.6-minimal (3.6.8-1~18.04.1) over (3.6.7-1~18.04) …
Preparing to unpack …/03-libpython3.6-stdlib_3.6.8-1~18.04.1_amd64.deb …
Unpacking libpython3.6-stdlib:amd64 (3.6.8-1~18.04.1) over (3.6.7-1~18.04) …
Preparing to unpack …/04-libpython3.6-minimal_3.6.8-1~18.04.1_amd64.deb …
Unpacking libpython3.6-minimal:amd64 (3.6.8-1~18.04.1) over (3.6.7-1~18.04) …
Selecting previously unselected package python3-lib2to3.
Preparing to unpack …/05-python3-lib2to3_3.6.8-1~18.04_all.deb …
Unpacking python3-lib2to3 (3.6.8-1~18.04) …
Selecting previously unselected package python3-distutils.
Preparing to unpack …/06-python3-distutils_3.6.8-1~18.04_all.deb …
Unpacking python3-distutils (3.6.8-1~18.04) …
Selecting previously unselected package dh-python.
Preparing to unpack …/07-dh-python_3.20180325ubuntu2_all.deb …
Unpacking dh-python (3.20180325ubuntu2) …
Selecting previously unselected package libpython3.6-dev:amd64.
Preparing to unpack …/08-libpython3.6-dev_3.6.8-1~18.04.1_amd64.deb …
Unpacking libpython3.6-dev:amd64 (3.6.8-1~18.04.1) …
Selecting previously unselected package libpython3-dev:amd64.
Preparing to unpack …/09-libpython3-dev_3.6.7-1~18.04_amd64.deb …
Unpacking libpython3-dev:amd64 (3.6.7-1~18.04) …
Selecting previously unselected package python3.6-dev.
Preparing to unpack …/10-python3.6-dev_3.6.8-1~18.04.1_amd64.deb …
Unpacking python3.6-dev (3.6.8-1~18.04.1) …
Selecting previously unselected package python3-dev.
Preparing to unpack …/11-python3-dev_3.6.7-1~18.04_amd64.deb …
Unpacking python3-dev (3.6.7-1~18.04) …
Selecting previously unselected package python3-pip.
Preparing to unpack …/12-python3-pip_9.0.1-2.3~ubuntu1.18.04.1_all.deb …
Unpacking python3-pip (9.0.1-2.3~ubuntu1.18.04.1) …
Selecting previously unselected package python3-setuptools.
Preparing to unpack …/13-python3-setuptools_39.0.1-2_all.deb …
Unpacking python3-setuptools (39.0.1-2) …
Selecting previously unselected package python3-wheel.
Preparing to unpack …/14-python3-wheel_0.30.0-0.2_all.deb …
Unpacking python3-wheel (0.30.0-0.2) …
Processing triggers for mime-support (3.60ubuntu1) …
Processing triggers for desktop-file-utils (0.23-1ubuntu3.18.04.2) …
Setting up python3-wheel (0.30.0-0.2) …
Setting up libpython3.6-minimal:amd64 (3.6.8-1~18.04.1) …
Processing triggers for libc-bin (2.27-3ubuntu1) …
Processing triggers for man-db (2.8.3-2ubuntu0.1) …
Processing triggers for gnome-menus (3.13.3-11ubuntu1.1) …
Setting up python3-lib2to3 (3.6.8-1~18.04) …
Setting up python3-distutils (3.6.8-1~18.04) …
Setting up libpython3.6-stdlib:amd64 (3.6.8-1~18.04.1) …
Setting up python3.6-minimal (3.6.8-1~18.04.1) …
Setting up python3-pip (9.0.1-2.3~ubuntu1.18.04.1) …
Setting up python3-setuptools (39.0.1-2) …
Setting up dh-python (3.20180325ubuntu2) …
Setting up libpython3.6:amd64 (3.6.8-1~18.04.1) …
Setting up python3.6 (3.6.8-1~18.04.1) …
Setting up libpython3.6-dev:amd64 (3.6.8-1~18.04.1) …
Setting up python3.6-dev (3.6.8-1~18.04.1) …
Setting up libpython3-dev:amd64 (3.6.7-1~18.04) …
Setting up python3-dev (3.6.7-1~18.04) …
Processing triggers for libc-bin (2.27-3ubuntu1) …
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ python
Python 3.6.5 |Anaconda, Inc.| (default, Apr 29 2018, 16:14:56)
[GCC 7.2.0] on linux
Type “help”, “copyright”, “credits” or “license” for more information.

exit()
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip3 install pyopengl
Collecting pyopengl
Downloading https://files.pythonhosted.org/packages/9c/1d/4544708aaa89f26c97cc09450bb333a23724a320923e74d73e028b3560f9/PyOpenGL-3.1.0.tar.gz (1.2MB)
100% |████████████████████████████████| 1.2MB 151kB/s
Building wheels for collected packages: pyopengl
Running setup.py bdist_wheel for pyopengl … done
Stored in directory: /home/xiaozhen/.cache/pip/wheels/6c/00/7f/1dd736f380848720ad79a1a1de5272e0d3f79c15a42968fb58
Successfully built pyopengl
Installing collected packages: pyopengl
Successfully installed pyopengl-3.1.0
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ spyder
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$

xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~/Desktop$ cd …
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip uninstall numpy
Uninstalling numpy-1.17.0:
Would remove:
/home/xiaozhen/.local/bin/f2py
/home/xiaozhen/.local/bin/f2py3
/home/xiaozhen/.local/bin/f2py3.6
/home/xiaozhen/.local/lib/python3.6/site-packages/numpy-1.17.0.dist-info/*
/home/xiaozhen/.local/lib/python3.6/site-packages/numpy/*
Proceed (y/n)? y
Successfully uninstalled numpy-1.17.0
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip install numpy1.14.5
Collecting numpy1.14.5
Could not find a version that satisfies the requirement numpy1.14.5 (from versions: )
No matching distribution found for numpy1.14.5
You are using pip version 10.0.1, however version 19.2.2 is available.
You should consider upgrading via the ‘pip install --upgrade pip’ command.
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip install --upgrade pip
Collecting pip
Downloading https://files.pythonhosted.org/packages/8d/07/f7d7ced2f97ca3098c16565efbe6b15fafcba53e8d9bdb431e09140514b0/pip-19.2.2-py2.py3-none-any.whl (1.4MB)
100% |████████████████████████████████| 1.4MB 131kB/s
distributed 1.21.8 requires msgpack, which is not installed.
tensorflow 1.14.0 has requirement numpy<2.0,>=1.14.5, but you’ll have numpy 1.14.3 which is incompatible.
Installing collected packages: pip
Found existing installation: pip 10.0.1
Uninstalling pip-10.0.1:
Successfully uninstalled pip-10.0.1
Successfully installed pip-19.2.2
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip install numpy1.14.5
Collecting numpy1.14.5
ERROR: Could not find a version that satisfies the requirement numpy1.14.5 (from versions: none)
ERROR: No matching distribution found for numpy1.14.5
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip3 install numpy1.14.5
Collecting numpy1.14.5
Exception:
Traceback (most recent call last):
File “/usr/lib/python3/dist-packages/pip/basecommand.py”, line 215, in main
status = self.run(options, args)
File “/usr/lib/python3/dist-packages/pip/commands/install.py”, line 353, in run
wb.build(autobuilding=True)
File “/usr/lib/python3/dist-packages/pip/wheel.py”, line 749, in build
self.requirement_set.prepare_files(self.finder)
File “/usr/lib/python3/dist-packages/pip/req/req_set.py”, line 380, in prepare_files
ignore_dependencies=self.ignore_dependencies))
File “/usr/lib/python3/dist-packages/pip/req/req_set.py”, line 554, in _prepare_file
require_hashes
File “/usr/lib/python3/dist-packages/pip/req/req_install.py”, line 278, in populate_link
self.link = finder.find_requirement(self, upgrade)
File “/usr/lib/python3/dist-packages/pip/index.py”, line 465, in find_requirement
all_candidates = self.find_all_candidates(req.name)
File “/usr/lib/python3/dist-packages/pip/index.py”, line 423, in find_all_candidates
for page in self._get_pages(url_locations, project_name):
File “/usr/lib/python3/dist-packages/pip/index.py”, line 568, in _get_pages
page = self._get_page(location)
File “/usr/lib/python3/dist-packages/pip/index.py”, line 683, in _get_page
return HTMLPage.get_page(link, session=self.session)
File “/usr/lib/python3/dist-packages/pip/index.py”, line 795, in get_page
resp.raise_for_status()
File “/usr/share/python-wheels/requests-2.18.4-py2.py3-none-any.whl/requests/models.py”, line 935, in raise_for_status
raise HTTPError(http_error_msg, response=self)
requests.exceptions.HTTPError: 404 Client Error: Not Found for url: https://pypi.org/simple/numpy1-14-5/
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip -V
pip 19.2.2 from /home/xiaozhen/anaconda3/lib/python3.6/site-packages/pip (python 3.6)
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ python
Python 3.6.5 |Anaconda, Inc.| (default, Apr 29 2018, 16:14:56)
[GCC 7.2.0] on linux
Type “help”, “copyright”, “credits” or “license” for more information.

import tensorflow
exit()
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ numpu
numpu: command not found
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ numpy -V
numpy: command not found
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ pip uninstall numpy
Uninstalling numpy-1.14.3:
Would remove:
/home/xiaozhen/anaconda3/lib/python3.6/site-packages/numpy
/home/xiaozhen/anaconda3/lib/python3.6/site-packages/numpy-1.14.3-py3.6.egg-info
Proceed (y/n)? n
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ python
Python 3.6.5 |Anaconda, Inc.| (default, Apr 29 2018, 16:14:56)
[GCC 7.2.0] on linux
Type “help”, “copyright”, “credits” or “license” for more information.

import tensorflow
hello=tf.constant(“hello,tensorflow”)
File “”, line 1
hello=tf.constant(“hello,tensorflow”)
^
SyntaxError: invalid character in identifier

exit()
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ python
Python 3.6.5 |Anaconda, Inc.| (default, Apr 29 2018, 16:14:56)
[GCC 7.2.0] on linux
Type “help”, “copyright”, “credits” or “license” for more information.

import tensorflow as tf
hello=tf.constant(“hello,tensorflow”)
File “”, line 1
hello=tf.constant(“hello,tensorflow”)
^
SyntaxError: invalid character in identifier

sess=tf.Session()
2019-08-16 13:02:35.149753: I tensorflow/core/platform/cpu_feature_guard.cc:142] Your CPU supports instructions that this TensorFlow binary was not compiled to use: AVX2 FMA
2019-08-16 13:02:35.173360: I tensorflow/core/platform/profile_utils/cpu_utils.cc:94] CPU Frequency: 1800000000 Hz
2019-08-16 13:02:35.174103: I tensorflow/compiler/xla/service/service.cc:168] XLA service 0x56533f609030 executing computations on platform Host. Devices:
2019-08-16 13:02:35.174146: I tensorflow/compiler/xla/service/service.cc:175] StreamExecutor device (0): ,

print(sess.run(hello))
Traceback (most recent call last):
File “”, line 1, in
NameError: name ‘hello’ is not defined

exit()
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ python
Python 3.6.5 |Anaconda, Inc.| (default, Apr 29 2018, 16:14:56)
[GCC 7.2.0] on linux
Type “help”, “copyright”, “credits” or “license” for more information.

import tensorflow as tf
hello=tf.constant(“hello,tensorflow”)
sees=tf.Session
print(sess.run(hello))
Traceback (most recent call last):
File “”, line 1, in
NameError: name ‘sess’ is not defined

print(sees.run(hello))
Traceback (most recent call last):
File “”, line 1, in
TypeError: run() missing 1 required positional argument: ‘fetches’

exit()
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ python
Python 3.6.5 |Anaconda, Inc.| (default, Apr 29 2018, 16:14:56)
[GCC 7.2.0] on linux
Type “help”, “copyright”, “credits” or “license” for more information.

import tensorflow as tf
hello=tf.constant(“hello,quzhen”)
sess=tf.Session()
2019-08-16 13:08:41.650482: I tensorflow/core/platform/cpu_feature_guard.cc:142] Your CPU supports instructions that this TensorFlow binary was not compiled to use: AVX2 FMA
2019-08-16 13:08:41.681224: I tensorflow/core/platform/profile_utils/cpu_utils.cc:94] CPU Frequency: 1800000000 Hz
2019-08-16 13:08:41.682502: I tensorflow/compiler/xla/service/service.cc:168] XLA service 0x55e879a7f8c0 executing computations on platform Host. Devices:
2019-08-16 13:08:41.682579: I tensorflow/compiler/xla/service/service.cc:175] StreamExecutor device (0): ,

print(sess.run(hello))
b’hello,quzhen’

exit()
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ python
Python 3.6.5 |Anaconda, Inc.| (default, Apr 29 2018, 16:14:56)
[GCC 7.2.0] on linux
Type “help”, “copyright”, “credits” or “license” for more information.

import tensorflow
exit()
xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$

哈哈哈，冲冲冲

关注

3
点赞
踩
6

收藏

觉得还不错? 一键收藏
7
评论
ubuntu 18.04 +anconda+spyder+tensorflow

xiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~$ cd Desktopxiaozhen@xiaozhen-Lenovo-XiaoXin-Chao7000-14IKBR:~/Desktop$ bash Anaconda3-5.2.0-Linux-x86_64.shWelcome to Anaconda3 5.2.0In order to c...
复制链接

扫一扫