openeuler-ssh容器镜像使用方法

最新推荐文章于 2024-08-12 15:38:12 发布

redrose2100

最新推荐文章于 2024-08-12 15:38:12 发布

阅读量670

点赞数

分类专栏： Docker 文章标签： ssh docker openEuler

本文链接：https://blog.csdn.net/redrose2100/article/details/128305199

版权

Docker 专栏收录该内容

36 篇文章 8 订阅

订阅专栏

【原文链接】openeuler-ssh容器镜像使用方法

文章目录

- 一、redrose2100/openeuler-ssh 镜像简介
- 二、redrose2100/openeuler-ssh 镜像应用

一、redrose2100/openeuler-ssh 镜像简介

redrose2100/openeuler-ssh的镜像仓库见 redrose2100/openeuler-ssh ，它为在openEuler镜像额基础上安装好sshd服务的镜像，并且设置了用户名root的密码为osImagePassword123，通过拉取此镜像即可直接启动可以ssh的容器。

二、redrose2100/openeuler-ssh 镜像应用

（1）创建一个网络，如下创建一个名为staticnet的网络，网段为172.18.0.0/16

docker network create --subnet=172.18.0.0/16 staticnet

（2）查看网络如下

[root@centos7-1 ~]# docker network ls
NETWORK ID     NAME        DRIVER    SCOPE
0eb4f2b7af54   bridge      bridge    local
be204ec4735f   host        host      local
1df66d2f7b49   none        null      local
d6f5c693f28d   staticnet   bridge    local
[root@centos7-1 ~]#

（3）启动容器，指定网络同时设置容器的ip地址

docker run -d --name=vm1 --privileged --net staticnet --ip 172.18.0.100 redrose2100/openeuler-ssh:22.03-lts /usr/sbin/sshd -D

（4）查看容器，如下，创建成功

[root@centos7-1 ~]# docker ps
CONTAINER ID   IMAGE                                 COMMAND               CREATED         STATUS         PORTS     NAMES
60fbd371e02c   redrose2100/openeuler-ssh:22.03-lts   "/usr/sbin/sshd -D"   5 seconds ago   Up 4 seconds             vm1
[root@centos7-1 ~]#

（5）如下，通过ssh命令即可登录到容器，而且容器的ip地址配置也已经生效了

[root@centos7-1 ~]# ssh -o "StrictHostKeyChecking=no" root@172.18.0.100
root@172.18.0.100's password:
Last failed login: Tue Dec 13 09:21:32 UTC 2022 from 172.18.0.1 on ssh:notty
There was 1 failed login attempt since the last successful login.


Welcome to 3.10.0-1160.el7.x86_64

System information as of time:  Tue Dec 13 09:21:56 AM UTC 2022

System load:    0.03
Processes:      8
Memory used:    19.6%
Swap used:      .2%
Usage On:       31%
Users online:   0


[root@60fbd371e02c ~]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.18.0.100  netmask 255.255.0.0  broadcast 172.18.255.255
        ether 02:42:ac:12:00:64  txqueuelen 0  (Ethernet)
        RX packets 62  bytes 9502 (9.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 41  bytes 8108 (7.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@60fbd371e02c ~]#