HCIP第二次

实验目标

 一：R6为ISP，只能配置IP地址,R1-R5的环回为私有网段

1：配置网段和IP地址

  二，R1/2/3为星型的拓扑结构，R1为中心站点

R1
[r1]int Tunnel 0/0/0
[r1-Tunnel0/0/0]ip add 192.168.7.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r1-Tunnel0/0/0]source 16.0.0.1
Sep 18 2022 18:43:45-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[r1-Tunnel0/0/0]nhrp network-id 100
 

R2

[r2]int t0/0/0
[r2-Tunnel0/0/0]ip add 192.168.7.2 24    
[r2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r2-Tunnel0/0/0]source GigabitEthernet 0/0/0
Sep 18 2022 18:44:47-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state.     
[r2-Tunnel0/0/0]nhrp network-id 100
[r2-Tunnel0/0/0]nhrp entry 192.168.7.1 16.0.0.1 register

R3
[r3]int t0/0/0
[r3-Tunnel0/0/0]ip add 192.168.7.3 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r3-Tunnel0/0/0]source GigabitEthernet 0/0/0
Sep 18 2022 18:46:16-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[r3-Tunnel0/0/0]nhrp network-id 100
[r3-Tunnel0/0/0]nhrp entry 192.168.7.1 16.0.0.1 register

 三：R1/4/5为全连的MGRE结构

R1r1]int t0/0/1
[r1-Tunnel0/0/1]ip add 192.168.8.1 24
[r1-Tunnel0/0/1]tunnel-protocol gre p2mp
[r1-Tunnel0/0/1]source 61.0.0.1
Sep 18 2022 19:00:23-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state.     
[r1-Tunnel0/0/1]nhrp network-id 200
 

R4
[r4]int t0/0/1
[r4-Tunnel0/0/1]ip add 192.168.8.2 24
[r4-Tunnel0/0/1]tunnel-protocol gre p2mp
[r4-Tunnel0/0/1]source g0/0/0
Sep 18 2022 19:02:34-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 
[r4-Tunnel0/0/1]nhrp network-id 200
[r4-Tunnel0/0/1]nhrp entry 192.168.8.1 61.0.0.1 register

R5
[r5]int t0/0/1
[r5-Tunnel0/0/1]ip add 192.168.8.3 24    
[r5-Tunnel0/0/1]tunnel-protocol gre p2mp 
[r5-Tunnel0/0/1]source g0/0/0
Sep 18 2022 19:03:48-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 
[r5-Tunnel0/0/1]nhrp network-id 200
[r5-Tunnel0/0/1]nhrp entry 192.168.8.1 61.0.0.1 register

 

 R4

[r4-Tunnel0/0/1]source 46.0.0.1
[r4-Tunnel0/0/1]nhrp network-id 400
R1

[r1-Tunnel0/0/1]source g0/0/0
[r1-Tunnel0/0/1]nhrp network-id 400
[r1-Tunnel0/0/1]nhrp entry 192.168.8.2 46.0.0.1 register
R5

[r5-Tunnel0/0/1]source g0/0/0
[r5-Tunnel0/0/1]nhrp network-id 400
[r5-Tunnel0/0/1]nhrp entry 192.168.8.2 46.0.0.1 register

 

R5

[r5-Tunnel0/0/1]source 56.0.0.1
[r5-Tunnel0/0/1]nhrp network-id 500

R1

[r1-Tunnel0/0/1]nhrp network-id 500    
[r1-Tunnel0/0/1]nhrp entry 192.168.8.3 56.0.0.1 register
R4

[r4-Tunnel0/0/1]nhrp network-id 500
[r4-Tunnel0/0/1]nhrp entry 192.168.8.3 56.0.0.1 register

四，所有私有网段可以互相通讯，使用OSPF完成

R1-5上开启OSPF

由于通道p2p为点到点所以改为 broadcast

1. ospf network-type broadcast

最后查路由表可以看到都在