+NAME=BT05
********************************************************************
* Command Description *
* ---------------------------------------------------------------- *
* AT Check if the command terminal work normally *
* AT+RESET Software reboot *
* AT+VERSION Get firmware, bluetooth, HCI and LMP version *
* AT+HELP List all the commands *
* AT+NAME Get/Set local device name *
* AT+PIN Get/Set pin code for pairing *
* AT+BAUD Get/Set baud rate *
* AT+LADDR Get local bluetooth address *
* AT+ADDR Get local bluetooth address *
* AT+DEFAULT Restore factory default *
* AT+RENEW Restore factory default *
* AT+STATE Get current state *
* AT+PWRM Get/Set power on mode(low power) *
* AT+POWE Get/Set RF transmit power *
* AT+SLEEP Sleep mode *
* AT+ROLE Get/Set current role. *
* AT+PARI Get/Set UART parity bit. *
* AT+STOP Get/Set UART stop bit. *
* AT+INQ Search slave model *
* AT+SHOW Show the searched slave model. *
* AT+CONN Connect the index slave model. *
* AT+IMME System wait for command when power on. *
* AT+START System start working. *
* AT+UUID Get/Set system SERVER_UUID . *
* AT+CHAR Get/Set system CHAR_UUID . *
* -----------------------------------------------------------------*
* Note: (M) = The command support master mode only. *
* Copyright@2013 www.cyobd.com. All rights reserved. *
********************************************************************