预紧分析

/prep7 
/title, Sample application of PSMESH 
et,1,92 
mp,ex,1,1e7 
mp,alpx,1,1.3e-5 
mp,prxy,1,0.30 
mp,ex,2,3e7 
mp,alpx,2,8.4e-6 
mp,prxy,2,0.30 
tref,70 
/foc,,-.09,.34,.42 
/dist,,.99 
/ang,,-55.8 
/view,,.39,-.87,.31 
/pnum,volu,1 
/num,1 
cylind,0.5,, -0.25,0, 0,180 
cylind,0.5,, 1,1.25, 0,180 
cylind,0.25,, 0,1, 0,180 
wpoff,.05 
cylind,0.35,1, 0,0.75, 0,180 
wpoff,-.1 
cylind,0.35,1, 0.75,1, 0,180 
wpstyle,,,,,,,,0 
vglue,all 
numc,all 
vplot 
mat,1 
smrt,off 
vmesh,4,5 
mat,2 
vmesh,1,3 
/pnum,mat,1 
eplot 
psmesh,,example,,volu,1,0,z,0.5,,,,elems 
CM,lines,LINE 
/dist,,1.1 
cmplot 
/solu 
eqslve,pcg,1e-8 
asel,s,loc,y 
da,all,symm 
asel,all 
dk,1,ux 
dk,12,ux 
dk,1,uz 
sload,1,9,,force,100,1,2 
/title,Sample application of PSMESH - preload only 
solve 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 
!Finally, we construct the actual solution of interest. We want to 
!know what happens to the preload in the bolt, and the stress field around 
!it, when the assembly temperature rises to 150° F. 
!Both the preload and the stresses increase because, for a uniform 
!temperature rise, there is greater thermal expansion in the aluminum plates 
!than in the steel bolt. Any method for applying preload that did not 
!allow the load to change would be unable to predict this result. 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 
/post1 
plnsol,s,z 
/solu 
antype,,restart 
tunif,150 
/title,Sample application of PSMESH - uniform 150° 
solve 
/post1 
plnsol,s,z 

作者：XuJC