我们大家都知道MySQL 存储过程是从 MySQL 5.0 开始逐渐增加新的功能。存储过程在实际应用中也是优点大于缺点。不过最主要的还是执行效率和SQL 代码封装。特别是 SQL 代码封装功能,如果没有存储过程。
在外部程序访问数据库时(例如 PHP),要组织很多 SQL 语句。
特别是业务逻辑复杂的时候,一大堆的 SQL 和条件夹杂在 PHP 代码中,让人不寒而栗。现在有了 MySQL 存储过程,业务逻辑可以封装存储过程中,这样不仅容易维护,而且执行效率也高。
一、MySQL 创建存储过程
“pr_add” 是个简单的 MySQL 存储过程,这个MySQL 存储过程有两个 int 类型的输入参数 “a”、“b”,返回这两个参数的和。
drop procedure if exists pr_add;计算两个数之和
create procedure pr_add ( a int, b int ) begin declare c int; if a is null then set a = 0; end if; if b is null then set b = 0; end if; set c = a + b; select c as sum; /* return c;不能在 MySQL 存储过程中使用。return 只能出现在函数中。
*/ end;二、调用 MySQL 存储过程
call pr_add(10, 20);执行 MySQL 存储过程,存储过程参数为 MySQL 用户变量。
set @a = 10; set @b = 20; call pr_add(@a, @b);三、MySQL 存储过程特点
创建 MySQL 存储过程的简单语法为:
create procedure 存储过程名字() ( [in|out|inout] 参数 datatype ) begin MySQL 语句; end;MySQL 存储过程参数如果不显式指定“in”、“out”、“inout”,则默认为“in”。习惯上,对于是“in” 的参数,我们都不会显式指定。
1. MySQL 存储过程名字后面的“()”是必须的,即使没有一个参数,也需要“()”
2. MySQL 存储过程参数,不能在参数名称前加“@”,如:“@a int”。下面的创建存储过程语法在 MySQL 中是错误的(在 SQL Server 中是正确的)。 MySQL 存储过程中的变量,不需要在变量名字前加“@”,虽然 MySQL 客户端用户变量要加个“@”。
create procedure pr_add ( @a int, -- 错误 b int -- 正确 )3. MySQL 存储过程的参数不能指定默认值。
4. MySQL 存储过程不需要在 procedure body 前面加 “as”。而 SQL Server 存储过程必须加 “as” 关键字。
create procedure pr_add ( a int, b int ) as -- 错误,MySQL 不需要 “as” begin mysql statement ...; end;5. 如果 MySQL 存储过程中包含多条 MySQL 语句,则需要 begin end 关键字。
create procedure pr_add ( a int, b int ) begin mysql statement 1 ...; mysql statement 2 ...; end;6. MySQL 存储过程中的每条语句的末尾,都要加上分号 “;”
... declare c int; if a is null then set a = 0; end if; ... end;7. MySQL 存储过程中的注释。
/* 这是个 多行 MySQL 注释。 */ declare c int; -- 这是单行 MySQL 注释 (注意 -- 后至少要有一个空格) if a is null then # 这也是个单行 MySQL 注释 set a = 0; end if; ... end;8. 不能在 MySQL 存储过程中使用 “return” 关键字。
set c = a + b; select c as sum; /* return c; -- 不能在 MySQL 存储过程中使用。return 只能出现在函数中。 */ end;9. 调用 MySQL 存储过程时候,需要在过程名字后面加“()”,即使没有一个参数,也需要“()”
call pr_no_param();10. 因为 MySQL 存储过程参数没有默认值,所以在调用 MySQL 存储过程时候,不能省略参数。可以用 null 来替代。
下面本人亲自实践的代码:
mysql> create procedure p_add(a int,b int)
-> begin
-> declare c int;
-> if a is null then
-> set a = 0;
-> end if;
-> if b is null then
-> set b = 0;
-> end if;
-> set c = a + b;
-> select c as sum;
-> return c;
-> //
ERROR 1313 (42000): RETURN is only allowed in a FUNCTION
mysql> create procedure p_add(a int,b int) begin declare c int; if a is null then set a = 0; end if; if b is null then set b = 0; end if; set c = a + b; select c as sum; return c;end;
-> //
ERROR 1313 (42000): RETURN is only allowed in a FUNCTION
mysql> delimiter //
mysql> create procedure p_add(a int,b int) begin declare c int; if a is null then set a = 0; end if; if b is null then set b = 0; end if; set c = a + b; select c as sum; return c;end;
-> //
ERROR 1313 (42000): RETURN is only allowed in a FUNCTION
mysql> create procedure p_add(a int,b int) begin declare c int; if a is null then set a = 0; end if; if b is null then set b = 0; end if; set c = a + b; select c as sum;end;
-> //
Query OK, 0 rows affected (0.00 sec)
mysql> delimiter ;
mysql> call p_add(10,20);
+------+
| sum |
+------+
| 30 |
+------+
1 row in set (0.00 sec)
Query OK, 0 rows affected (0.00 sec)
mysql> set @a = 10;
Query OK, 0 rows affected (0.00 sec)
mysql> set @b = 40;
Query OK, 0 rows affected (0.00 sec)
mysql> call p_add(@a,@b);
+------+
| sum |
+------+
| 50 |
+------+
1 row in set (0.00 sec)
Query OK, 0 rows affected (0.00 sec)
//建个临时表,用存储过程插入50万条数据,哎用了33秒钟才搞定!
createtable t_06 (
id intnotnullprimarykey,
c1 varchar(30),
i2 int
) engine = myisam;
delimiter //
CREATEPROCEDURE prepareData_t_06 ()
BEGIN
DECLARE i INTDEFAULT1;
WHILE i <500000 DO
insertinto t_06 values (i,concat('AA',i),i);
SET i = i +1;
ENDWHILE;
END;
//
delimiter ;
CALL prepareData_t_06();
selectcount(*) from t_06;
show indexfrom t_06;
show table status like't_06';
Oracle 的 procedure 的创建:
1.编写。编写一个最最简单的存储过程,给它起个名字叫做proc_helloworld
CREATE OR REPLACE PROCEDURE proc_helloworld
IS
BEGIN
DBMS_OUTPUT.put_line ('Hello World!');
END;
/
2.创建。在sqlplus命令行界面创建该存储过程
sys@ora10g> conn sec/sec
Connected.
sec@ora10g> CREATE OR REPLACE PROCEDURE proc_helloworld
2 IS
3 BEGIN
4 DBMS_OUTPUT.put_line ('Hello World!');
5 END;
6 /
Procedure created.
3.运行。两种方法运行存储过程
1).需要在屏幕上显示出"DBMS_OUTPUT.put_line"的输出字符串,需要做一个小小的设置
sec@ora10g> show serveroutput
serveroutput OFF
sec@ora10g>set serveroutput on
sec@ora10g> show serveroutput
serveroutput ON SIZE 10000 FORMAT WORD_WRAPPED
2).在sqlplus命令行界面使用"EXECUTE"命令(简写做"EXEC")执行
sec@ora10g>exec proc_helloworld
Hello World!
PL/SQL procedure successfully completed.
3).在一个无名PL/SQL块内运行存储过程
BEGIN
proc_helloworld;
END;
/
sec@ora10g> BEGIN
2 proc_helloworld;
3 END;
4 /
Hello World!
PL/SQL procedure successfully completed.
4.修改。修改一个存储过程只需要将修改好的存储过程在sqlplus界面先重新执行一下即可,因为在创建过程中使用的是"CREATE OR REPLACE PROCEDURE",也就是说如果没有就创建,如果已经存在了这个存储过程,就替换它
CREATE OR REPLACE PROCEDURE proc_helloworld
IS
BEGIN
DBMS_OUTPUT.put_line ('Hello World! '||chr(10)||'I am a Happy DBA Secooler!');
END;
/
或者
CREATE OR REPLACE PROCEDURE proc_helloworld
IS
BEGIN
DBMS_OUTPUT.put_line ('Hello World!
I am a Happy DBA Secooler!');
END;
/
sec@ora10g> CREATE OR REPLACE PROCEDURE proc_helloworld
2 IS
3 BEGIN
4 DBMS_OUTPUT.put_line ('Hello World! '||chr(10)||'I am a Happy DBA Secooler!');
5 END;
6 /
Procedure created.
看一下执行效果:
sec@ora10g> exec proc_helloworld;
Hello World!
I am a Happy DBA Secooler!
PL/SQL procedure successfully completed.
5.调试。对于非常复杂的存储过程的调试是真正体现个人魅力和能力的地方,往往需要很多的经验,这个急不得,只能慢慢来 Take it easy.
在sqlplus下调试存储过程时,如果出现错误,时刻使用"show errors"命令查看哪里出错了,例如:
sec@ora10g> CREATE OR REPLACE PROCEDURE proc_helloworld
2 IS
3 BEGIN
4 DBMS_OUTPUT.put_line ('Hello World!');
5 END
6 /
Warning: Procedure created with compilation errors.
sec@ora10g> show errors
Errors for PROCEDURE PROC_HELLOWORLD:
LINE/COL ERROR
-------- -----------------------------------------------------------------
5/3 PLS-00103: Encountered the symbol "end-of-file" when expecting
one of the following:
; <an identifier> <a double-quoted delimited-identifier>
delete exists prior <a single-quoted SQL string>
The symbol ";" was substituted for "end-of-file" to continue.
通过提示,问题出现在END后面没有分号结束符号,修改后问题得到处理
sec@ora10g> CREATE OR REPLACE PROCEDURE proc_helloworld
2 IS
3 BEGIN
4 DBMS_OUTPUT.put_line ('Hello World!');
5 END;
6 /
Procedure created.
6.删除。使用drop语句删除存储过程
sec@ora10g> select object_name,object_type,status from user_objects where OBJECT_TYPE='PROCEDURE';
OBJECT_NAME OBJECT_TYPE STATUS
------------------------------ ------------------- -------
PROC_HELLOWORLD PROCEDURE VALID
sec@ora10g>DROP PROCEDURE proc_helloworld;
Procedure dropped.
sec@ora10g> select object_name,object_type,status from user_objects where OBJECT_TYPE='PROCEDURE';
no rows selected
7.获取。在维护存储过程的过程中往往需要快速的获取存储过程的SQL创建语句,我经常使用的有如下两种方法
1).使用DBMS_METADATA包获得
sec@ora10g>SELECT DBMS_METADATA.get_ddl ('PROCEDURE', 'PROC_HELLOWORLD') from dual;
DBMS_METADATA.GET_DDL('PROCEDURE','PROC_HELLOWORLD')
--------------------------------------------------------------------------------
CREATE OR REPLACE PROCEDURE "SEC"."PROC_HELLOWORLD"
IS
BEGIN
DBMS_OUTPUT.put_line ('Hello World!');
END;
2).使用"USER_SOURCE"视图获得,本人推荐使用这种方法查看,格式标准,内容也全面
sec@ora10g>SELECT text FROM user_source WHERE NAME = 'PROC_HELLOWORLD';
TEXT
------------------------------------------------------------------------------------------------------------------------------
PROCEDURE proc_helloworld
IS
BEGIN
DBMS_OUTPUT.put_line ('Hello World!');
END;
8.小结
上面的实验,我通过编写、创建、运行、修改、调试、删除和获取七个内容描述了一个存储过程的开发和维护过程。
试验,实验还有实践,技术工作者永远不变的途径!
Goodluck Friends!