RK3328 firendlywrt 编译过程

RK3328 firendlywrt 编译过程

1. 代码下载非常慢，而且可能出现下载失败的情况，修改hosts或科学上网
2. 因软件外下载失败导致编译失败时，可根据编译log中的下载链接，手动下载软件包

下载代码

git clone https://github.com/friendlyarm/repo --depth 1 tools
repo init -u https://github.com/friendlyarm/friendlywrt_manifests -b master-v22.03 -m rk3328.xml --repo-url=https://github.com/friendlyarm/repo  --no-clone-bundle
repo sync -c  --no-clone-bundle

#! /bin/bash
repo sync -c --no-clone-bundle
while [ $? -ne 0 ]; 
do  
    repo sync -c --no-clone-bundle
done

First compilation step

./build.sh rk3328.mk  # or rk3328-docker.mk

##All the components (including u-boot, kernel, and friendlywrt) are compiled and the sd card image will be generated, then execute the following 	  command #to generate the image file for installing the system into the emmc:

./build.sh emmc-img

##After making changes to the project, the sd card image needs to be repackaged by running the following command:
./build.sh sd-img

Secondary compilation steps

cd friendlywrt
make menuconfig     #定制friendlywrt
rm -rf ./tmp
make -j${nproc}		#重新生成friendlywrt
cd ../
./build.sh sd-img	#打包img
./build.sh emmc-img

其他编译选项

#编译uboot only 
	./build.sh uboot
#Build kernel only
	./build.sh kernel
	
#Build friendlywrt only
	./build.sh friendlywrt
	#Or go to the friendlywrt directory and follow the standard openwrt commands. If you get an error with the above command, try using the following command to compile in a single thread:
	cd friendlywrt
	make -j1 V=s

参考

https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R2S/zh