LCD设备驱动程序3

最新推荐文章于 2022-08-16 23:02:32 发布

shexujia

最新推荐文章于 2022-08-16 23:02:32 发布

阅读量549

点赞数

分类专栏： linux驱动

本文链接：https://blog.csdn.net/shexujia/article/details/8448908

版权

linux驱动专栏收录该内容

9 篇文章 0 订阅

订阅专栏

接着上文讲到的结构体struct s3cfb_fimd_info_t s3cfb_fimd(见drivers/video/samsung/s3cfb_fimd5x.c)

由结构命名FIMD: Fully Interactive Mobile Display （完全交互式移动显示设备）以及结构体原形，猜测与硬件配置有关。

1，struct s3cfb_info_t 结构体原形

typedef struct {
/* Screen size */
int width;
int height;

/* Screen info */
int xres;
int yres;
/* Virtual Screen info */
int xres_virtual;
int yres_virtual;
int xoffset;
int yoffset;

/* OSD Screen size */
int osd_width;
int osd_height;
/* OSD Screen info */
int osd_xres;
int osd_yres;
/* OSD Screen info */
int osd_xres_virtual;
int osd_yres_virtual;

int bpp;
int bytes_per_pixel;
unsigned long pixclock;

int hsync_len;
int left_margin;
int right_margin;
int vsync_len;
int upper_margin;
int lower_margin;
int sync;

int cmap_grayscale:1;
int cmap_inverse:1;
int cmap_static:1;
int unused:29;

/* backlight info */
int backlight_min;
int backlight_max;
int backlight_default;

int vs_offset;
int brightness;
int palette_win;
int backlight_level;
int backlight_power;
int lcd_power;

s3cfb_vsync_info_t vsync_info;
s3cfb_vs_info_t vs_info;

/* lcd configuration registers */
unsigned long lcdcon1;
unsigned long lcdcon2;

unsigned long lcdcon3;
unsigned long lcdcon4;
unsigned long lcdcon5;

/* GPIOs */
unsigned long gpcup;
unsigned long gpcup_mask;
unsigned long gpccon;
unsigned long gpccon_mask;
unsigned long gpdup;
unsigned long gpdup_mask;
unsigned long gpdcon;
unsigned long gpdcon_mask;

/* lpc3600 control register */
.....

/* utility functions */
void (*set_backlight_power)(int);
void (*set_lcd_power)(int);
void (*set_brightness)(int);
int (*map_video_memory)(s3cfb_info_t *);
int (*unmap_video_memory)(s3cfb_info_t *);
}s3cfb_fimd_info_t;

2，s3cfb_fimd的结构体成员赋值到fbinfo之前只有少量数据初始化，如下。

s3cfb_fimd_info_t s3cfb_fimd = {
.vidcon0 = S3C_VIDCON0_INTERLACE_F_PROGRESSIVE | S3C_VIDCON0_VIDOUT_RGB_IF | S3C_VIDCON0_L1_DATA16_SUB_16_MODE | S3C_VIDCON0_L0_DATA16_MAIN_16_MODE | S3C_VIDCON0_PNRMODE_RGB_P | S3C_VIDCON0_CLKVALUP_ALWAYS | S3C_VIDCON0_CLKDIR_DIVIDED | S3C_VIDCON0_CLKSEL_F_HCLK | S3C_VIDCON0_ENVID_DISABLE | S3C_VIDCON0_ENVID_F_DISABLE,

#elif defined (CONFIG_FB_S3C_EXT_BPP_24)
......
#endif

.vidosd1c = S3C_VIDOSDxC_ALPHA1_B(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_G(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_R(S3CFB_MAX_ALPHA_LEVEL),
.vidosd2c = S3C_VIDOSDxC_ALPHA1_B(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_G(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_R(S3CFB_MAX_ALPHA_LEVEL),
.vidosd3c = S3C_VIDOSDxC_ALPHA1_B(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_G(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_R(S3CFB_MAX_ALPHA_LEVEL),
.vidosd4c = S3C_VIDOSDxC_ALPHA1_B(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_G(S3CFB_MAX_ALPHA_LEVEL) | S3C_VIDOSDxC_ALPHA1_R(S3CFB_MAX_ALPHA_LEVEL),
.vidintcon0 = S3C_VIDINTCON0_FRAMESEL0_VSYNC | S3C_VIDINTCON0_FRAMESEL1_NONE | S3C_VIDINTCON0_INTFRMEN_DISABLE | S3C_VIDINTCON0_FIFOSEL_WIN0 | S3C_VIDINTCON0_FIFOLEVEL_25 | S3C_VIDINTCON0_INTFIFOEN_DISABLE | S3C_VIDINTCON0_INTEN_ENABLE,
.vidintcon1 = 0,

.xoffset = 0,
.yoffset = 0,

.w1keycon0 = S3C_WxKEYCON0_KEYBLEN_DISABLE | S3C_WxKEYCON0_KEYEN_F_DISABLE | S3C_WxKEYCON0_DIRCON_MATCH_FG_IMAGE | S3C_WxKEYCON0_COMPKEY(0x0),
.w1keycon1 = S3C_WxKEYCON1_COLVAL(0xffffff),
.w2keycon0 = S3C_WxKEYCON0_KEYBLEN_DISABLE | S3C_WxKEYCON0_KEYEN_F_DISABLE | S3C_WxKEYCON0_DIRCON_MATCH_FG_IMAGE | S3C_WxKEYCON0_COMPKEY(0x0),
.w2keycon1 = S3C_WxKEYCON1_COLVAL(0xffffff),
.w3keycon0 = S3C_WxKEYCON0_KEYBLEN_DISABLE | S3C_WxKEYCON0_KEYEN_F_DISABLE | S3C_WxKEYCON0_DIRCON_MATCH_FG_IMAGE | S3C_WxKEYCON0_COMPKEY(0x0),
.w3keycon1 = S3C_WxKEYCON1_COLVAL(0xffffff),
.w4keycon0 = S3C_WxKEYCON0_KEYBLEN_DISABLE | S3C_WxKEYCON0_KEYEN_F_DISABLE | S3C_WxKEYCON0_DIRCON_MATCH_FG_IMAGE | S3C_WxKEYCON0_COMPKEY(0x0),
.w4keycon1 = S3C_WxKEYCON1_COLVAL(0xffffff),

.sync = 0,
.cmap_static = 1,

.vs_offset = S3CFB_DEFAULT_DISPLAY_OFFSET,
.brightness = S3CFB_DEFAULT_BRIGHTNESS,
.backlight_level = S3CFB_DEFAULT_BACKLIGHT_LEVEL,
.backlight_power = 1,
.lcd_power = 1,
};

对比函数static void s3cfb_init_fbinfo(s3cfb_info_t *finfo, char *drv_name, int index)，对缺少的成员赋值s3cfb_fimd.width做全内核搜索。

3，函数static void s3cfb_set_fimd_info(void)

发现在以下4个文件都有类似的函数

drivers/video/samsung/s3cfb_lte480wv.c s3cfb_fimd.width=320

drivers/video/samsung/s3cfb_lts222qv.c s3cfb_fimd.width=240

drivers/video/samsung/s3cfb_ltv350qv.c s3cfb_fimd.width=320

drivers/video/samsung/s3c_mini6410.c #if defined(CONFIG_FB_S3C_EXT_TFT480272) ....

推断前3个文件是linux自带的，第4个文件是友善之臂自己写的文件，查看video/samsung/Makefile

obj-$(CONFIG_FB_S3C_EXT_TFT480272) += s3c_mini6410.o

。。。。。。

果然如此，前3个文件都没编译进内核，只有第4个文件。

那么fbinfo的其他成员都在s3c_mini6410.c获取。

至此，就剩下硬件寄存器的配置分析了。

shexujia

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
LCD设备驱动程序3

接着上文讲到的结构体struct s3cfb_fimd_info_t s3cfb_fimd(见drivers/video/samsung/s3cfb_fimd5x.c)由结构命名FIMD: Fully Interactive Mobile Display （完全交互式移动显示设备）以及结构体原形，猜测与硬件配置有关。1，struct s3cfb_info_t 结构体原形typed
复制链接

扫一扫