海思Hi3519AV100sensor移植之一-- imx307

1. 驱动修改， 基于imx291的驱动(imx291_sensor_ctl.c )进行修改， 遵循imx307数据手册修改寄存器即可。（因为imx307与imx291型号差距不大，初始化序列可以参考imx291） 

const unsigned short IMX291_SETTING_SHORT[]=
{
    //Tag  standby
    0x0200,0x1,
    0x0204,0x10,
    //Tag AD 12bit
    0x0205,0x1,
    0x0206,0x0,
    //Tag FULL HD1080
    0x0207,0x00,//0x10,
    0x0208,0xA0,//0x10,
    //Tag 30fps
    0x0209,0x02,//IMX185_FRSEL,//0x2,
    //Tag BLACKLEVEL default
    0x020A,0xf0,
    0x020B,0x0,
    0x020C,0x0,
    0x020D,0x0,
    0x020E,0x1,
    0x020F,0x00,//0x1,
    0x0210,0x21,//0x39,
    0x0211,0x0,
    0x0212,0x64,//0x50,
    0x0213,0x0,
    //Tag GAIN
    0x0214,0x0,
    0x0215,0x0,
    0x0216,0x09,//0x8,
    0x0217,0x0,
    //Tag  /VMAX calc refer to 
    0x0218,0x65,//0x46,//0x65,
    0x0219,0x4,//0x5,//0x4,
    0x021A,0x0,

    0x021B,0x00,//IMX185_HMAX_LOW,//0x98,
    //Tag HMAX
    0x021C,0x30,//IMX185_HMAX_HIGH,//0x8,
    0x021D,0x11,//0xff,

    0x021E,0xB2,//0x1,
    0x021F,0x01,//0x0,
    //Tag SHS1
    0x0220,0x0,
    0x0221,0x0,
    0x0222,0x0,

    //Tag :WINWV_OB calc ?
    0x023A,0x10,//0xc9,
    0x023B,0x00,//0x4,
    //Tag WINPV
    0x023C,0x0,
    0x023D,0x0,
    //Tag WINWV
    0x023E,0x49,//0x9c,
    0x023F,0x04,//0x7,
    //Tag WINPH
    0x0240,0x00,//0x1,
    0x0241,0x0,
    //Tag WInWH
    0x0242,0x9C,//0x1,
    0x0243,0x07,//0x0,

    //Fixed in CSI-2
    0x0246,0x01,//0x0,
    0x0247,0x01,//0x8,
    //Tag XVSLNG
    0x0248,0x00,//0x13,
    0x0249,0x08,//0x0,
    0x024A,0x00,
    //0x024B,0x00,
    //Tag INCK
    0x025C,0x18,//0x20,
    0x025D,0x03,//0x0,
    0x025E,0x20,//0x18,
    0x025F,0x01,//0x0,

    0x0270,0x02,
    0x0271,0x11,
    0x02A6,0x20,
    0x02A7,0x00,
    0x02A8,0x20,
    0x02A9,0x00,
    0x02AA,0x20,
    0x02AB,0x00,
    0x02AC,0x20,


    0x030B,0x00,//0x84,
    0x0319,0x9E,//0x0,
    0x031E,0x08,//0x3,
    0x0328,0x05,//0x0,
    0x0334,0x0F,//0x0,
    0x033B,0x50,//0x0,
    0x033C,0x41,//0x0,
    0x033D,0x83,//0x1,

    //Tag INCKSEL5
    0x035E,0x1A,//0x12,
    0x0364,0x1A,//0x12,
    0x037C,0x0,
    0x037D,0x00,//0x10,
    //0x037E,0x0,
    0x037F,0x0,


    0x04B8,0x50,//0xc1,//0x11,
    0x04B9,0x10,//0x12,//0x13,
    0x04BA,0x0,
    0x04BB,0x04,//0xac,

    0x04C8,0x50,//0x0,
    0x04C9,0x10,//0xb0,//0xb5,
    0x04CA,0x00,//0x40,//0x90,
    0x04CB,0x04,//0xb,


    0x052C,0xD3,//IMX185_THSEXIT,//0x3f,
    0x052D,0x10,//0x20,//0x1f,
    0x052E,0x0D,//0x3,

    0x0558,0x06,
    0x0559,0xE1,
    0x055A,0x11,

    0x0560,0x1E,
    0x0561,0x61,
    0x0562,0x10,

    0x05B0,0x08,//0x0,
    0x05B1,0x30,//0x0,
    0x05B2,0x00,
    0x05B3,0x04,//0x0,


    //REPETITION default
    0x0605,0x20,
    0x0606,0x00,
    //LANE_NUM default
    0x0607,0x03,
    //Tag OPB_SIZE_V
    0x0614,0x0A,
    //Tag YOUTSIZE
    0x0618,0x49,
    0x0619,0x04,

    0x062C,0x47,
    0x062D,0x00,
    0x0630,0x0F,
    0x0631,0x00,
    //RAW12:
    0x0641,0x0C,
    0x0642,0x0C,
    //Tag 3: 4Lane
    0x0643,0x03,
    //INCK = 37.125 MHz
    0x0644,0x20,
    0x0645,0x25,

    0x0646,0x47,
    0x0647,0x00,

    0x0648,0x1F,
    0x0649,0x00,

    0x064A,0x17,
    0x064B,0x00,

    0x064C,0x0F,
    0x064D,0x00,

    0x064E,0x17,
    0x064F,0x00,

    0x0650,0x47,
    0x0651,0x00,

    0x0652,0x0F,
    0x0653,0x00,

    0x0654,0x0F,
    0x0655,0x00,
    //Tag X_OUT_SIZE
    0x0672,0x9C,
    0x0673,0x07,
    //H,V Inverted
    0x3007,0x03
};

2. 按照《sensor调试指南》修改文件，主要集中在sample_comm_vi.c , sample_comm_isp.c

• 下面为驱动程序分析

原文件为sample_comm_isp.c

HI_S32 SAMPLE_COMM_ISP_Sensor_Regiter_callback(ISP_DEV IspDev, HI_U32 u32SnsId)
{
    ALG_LIB_S stAeLib;
    ALG_LIB_S stAwbLib;
    const ISP_SNS_OBJ_S* pstSnsObj;
    HI_S32    s32Ret = -1;

    if (MAX_SENSOR_NUM <= u32SnsId)
    {
        SAMPLE_PRT("invalid sensor id: %d\n", u32SnsId);
        return HI_FAILURE;
    }

    pstSnsObj = SAMPLE_COMM_ISP_GetSnsObj(u32SnsId);

    if (HI_NULL == pstSnsObj)
    {
        SAMPLE_PRT("sensor %d not exist!\n", u32SnsId);
        return HI_FAILURE;
    }

 

跳入SAMPLE_COMM_ISP_GetSnsObj，发现原来是缺少了stSnsImx307Obj;所以我在这里添加了相应的代码

    switch (enSnsType)
    {

        
        case SONY_IMX290_MIPI_2M_30FPS_12BIT:
        case SONY_IMX290_MIPI_2M_30FPS_12BIT_WDR2TO1:
            return &stSnsImx290Obj;
       /*添加的代码*/
        case SONY_IMX307_MIPI_2M_30FPS_12BIT:            
            return &stSnsImx307Obj;
        ...
    }

该结构体定义在

imx290_cmos.c ； 添加stSnsImx307Obj

ISP_SNS_OBJ_S stSnsImx307Obj =
{
    .pfnRegisterCallback    = sensor_register_callback,
    .pfnUnRegisterCallback  = sensor_unregister_callback,
    .pfnStandby             = imx291_standby,
    .pfnRestart             = imx291_restart,
    .pfnMirrorFlip          = HI_NULL,
    .pfnWriteReg            = imx291_write_register,
    .pfnReadReg             = imx291_read_register,
    .pfnSetBusInfo          = imx291_set_bus_info,
    .pfnSetInit             = sensor_set_init
};

定义在.c文件所有肯定是外部引用，extern , 位置

hi_sns_ctrl.h ； 同理添加 extern ISP_SNS_OBJ_S stSnsImx307Obj

extern ISP_SNS_OBJ_S stSnsMn34220Obj;
extern ISP_SNS_OBJ_S stSnsImx377Obj;
extern ISP_SNS_OBJ_S stSnsImx299Obj;
extern ISP_SNS_OBJ_S stSnsImx477Obj;
extern ISP_SNS_OBJ_S stSnsImx299SlvsObj;
extern ISP_SNS_OBJ_S stSnsImx290Obj;
extern ISP_SNS_OBJ_S stSnsImx327Obj;
extern ISP_SNS_OBJ_S stSnsImx334Obj;
extern ISP_SNS_OBJ_S stSnsOV2718Obj;
extern ISP_SNS_OBJ_S stSnsCmv50000Obj;
extern ISP_SNS_OBJ_S stSnsImx277SlvsObj;
extern ISP_SNS_OBJ_S stSnsImx117Obj;
extern ISP_SNS_OBJ_S stSnsImx290SlaveObj;
extern ISP_SNS_OBJ_S stSnsImx334SlaveObj;
extern ISP_SNS_OBJ_S stSnsImx226Obj;
extern ISP_SNS_OBJ_S stSnsImx335Obj;
extern ISP_SNS_OBJ_S stSnsImx458Obj;
/*添加的代码*/
extern ISP_SNS_OBJ_S stSnsImx307Obj;