Executors创建的几种线程池

使用Executors创建线程池：

共有四种线程池：

1. CachedThreadPool 可缓存线程池

    /**
     * Creates a thread pool that creates new threads as needed, but
     * will reuse previously constructed threads when they are
     * available.  These pools will typically improve the performance
     * of programs that execute many short-lived asynchronous tasks.
     * Calls to {@code execute} will reuse previously constructed
     * threads if available. If no existing thread is available, a new
     * thread will be created and added to the pool. Threads that have
     * not been used for sixty seconds are terminated and removed from
     * the cache. Thus, a pool that remains idle for long enough will
     * not consume any resources. Note that pools with similar
     * properties but different details (for example, timeout parameters)
     * may be created using {@link ThreadPoolExecutor} constructors.
     *
     * @return the newly created thread pool
     */
    public static ExecutorService newCachedThreadPool() {
        return new ThreadPoolExecutor(0, Integer.MAX_VALUE,
                                      60L, TimeUnit.SECONDS,
                                      new SynchronousQueue<Runnable>());
    }

    /**
     * Creates a thread pool that creates new threads as needed, but
     * will reuse previously constructed threads when they are
     * available, and uses the provided
     * ThreadFactory to create new threads when needed.
     * @param threadFactory the factory to use when creating new threads
     * @return the newly created thread pool
     * @throws NullPointerException if threadFactory is null
     */
    public static ExecutorService newCachedThreadPool(ThreadFactory threadFactory) {
        return new ThreadPoolExecutor(0, Integer.MAX_VALUE,
                                      60L, TimeUnit.SECONDS,
                                      new SynchronousQueue<Runnable>(),
                                      threadFactory);
    }

注意两个要点：
1.SynchronousQueue是一个没有数据缓冲的BlockingQueue，生产者线程对其的插入操作put必须等待消费者的移除操作take，反过来也一样。
2.核心线程数为0，最大线程总数为int最大值。
综上：如果创建的线程阻塞，新的task添加进来会不断创建线程，最终耗尽资源。

2. FixedThreadPool 定长线程池

    /**
     * Creates a thread pool that reuses a fixed number of threads
     * operating off a shared unbounded queue.  At any point, at most
     * {@code nThreads} threads will be active processing tasks.
     * If additional tasks are submitted when all threads are active,
     * they will wait in the queue until a thread is available.
     * If any thread terminates due to a failure during execution
     * prior to shutdown, a new one will take its place if needed to
     * execute subsequent tasks.  The threads in the pool will exist
     * until it is explicitly {@link ExecutorService#shutdown shutdown}.
     *
     * @param nThreads the number of threads in the pool
     * @return the newly created thread pool
     * @throws IllegalArgumentException if {@code nThreads <= 0}
     */
    public static ExecutorService newFixedThreadPool(int nThreads) {
        return new ThreadPoolExecutor(nThreads, nThreads,
                                      0L, TimeUnit.MILLISECONDS,
                                      new LinkedBlockingQueue<Runnable>());
    }

    /**
     * Creates a thread pool that reuses a fixed number of threads
     * operating off a shared unbounded queue, using the provided
     * ThreadFactory to create new threads when needed.  At any point,
     * at most {@code nThreads} threads will be active processing
     * tasks.  If additional tasks are submitted when all threads are
     * active, they will wait in the queue until a thread is
     * available.  If any thread terminates due to a failure during
     * execution prior to shutdown, a new one will take its place if
     * needed to execute subsequent tasks.  The threads in the pool will
     * exist until it is explicitly {@link ExecutorService#shutdown
     * shutdown}.
     *
     * @param nThreads the number of threads in the pool
     * @param threadFactory the factory to use when creating new threads
     * @return the newly created thread pool
     * @throws NullPointerException if threadFactory is null
     * @throws IllegalArgumentException if {@code nThreads <= 0}
     */
    public static ExecutorService newFixedThreadPool(int nThreads, ThreadFactory threadFactory) {
        return new ThreadPoolExecutor(nThreads, nThreads,
                                      0L, TimeUnit.MILLISECONDS,
                                      new LinkedBlockingQueue<Runnable>(),
                                      threadFactory);
    }

注意：上述代码中，线程数量是有限制了，但是队列数量无限制，而根据以下代码：

    /**
     * Creates a {@code LinkedBlockingQueue} with a capacity of
     * {@link Integer#MAX_VALUE}.
     */
    public LinkedBlockingQueue() {
        this(Integer.MAX_VALUE);
    }

可能队列里堆积大量请求导致OOM。

3. SingleThreadPool 只有一个线程的线程池。

这个只贴一个方法，重载方法没贴。

    /**
     * Creates an Executor that uses a single worker thread operating
     * off an unbounded queue. (Note however that if this single
     * thread terminates due to a failure during execution prior to
     * shutdown, a new one will take its place if needed to execute
     * subsequent tasks.)  Tasks are guaranteed to execute
     * sequentially, and no more than one task will be active at any
     * given time. Unlike the otherwise equivalent
     * {@code newFixedThreadPool(1)} the returned executor is
     * guaranteed not to be reconfigurable to use additional threads.
     *
     * @return the newly created single-threaded Executor
     */
    public static ExecutorService newSingleThreadExecutor() {
        return new FinalizableDelegatedExecutorService
            (new ThreadPoolExecutor(1, 1,
                                    0L, TimeUnit.MILLISECONDS,
                                    new LinkedBlockingQueue<Runnable>()));
    }

注意：与2有同样问题。

4. ScheduledThreadPool 按照固定频率执行的线程池。

   /**
     * Creates a thread pool that can schedule commands to run after a
     * given delay, or to execute periodically.
     * @param corePoolSize the number of threads to keep in the pool,
     * even if they are idle
     * @return a newly created scheduled thread pool
     * @throws IllegalArgumentException if {@code corePoolSize < 0}
     */
    public static ScheduledExecutorService newScheduledThreadPool(int corePoolSize) {
        return new ScheduledThreadPoolExecutor(corePoolSize);
    }


    /**
     * Creates a thread pool that can schedule commands to run after a
     * given delay, or to execute periodically.
     * @param corePoolSize the number of threads to keep in the pool,
     * even if they are idle
     * @param threadFactory the factory to use when the executor
     * creates a new thread
     * @return a newly created scheduled thread pool
     * @throws IllegalArgumentException if {@code corePoolSize < 0}
     * @throws NullPointerException if threadFactory is null
     */
    public static ScheduledExecutorService newScheduledThreadPool(
            int corePoolSize, ThreadFactory threadFactory) {
        return new ScheduledThreadPoolExecutor(corePoolSize, threadFactory);
    }

注意：有上述所有问题。

引用自：阿里巴巴Java开发手册：

强制】线程池不允许使用 Executors 去创建，而是通过 ThreadPoolExecutor 的方式，
这样的处理方式让写的同学更加明确线程池的运行规则，规避资源耗尽的风险。