c#中结构数组怎么定义?怎么获取一个字符的ascii码?
第3楼
数组概述 C# 数组从零开始建立索引,即数组索引从零开始。C# 中数组的工作方式与在大多数其他流行语言中的工作方式类似。但还有一些差异应引起注意。 声明数组时,方括号 ([]) 必须跟在类型后面,而不是标识符后面。在 C# 中,将方括号放在标识符后是不合法的语法。 int[] table; // not int table[]; 另一细节是,数组的大小不是其类型的一部分,而在 C 语言中它却是数组类型的一部分。这使您可以声明一个数组并向它分配 int 对象的任意数组,而不管数组长度如何。 int[] numbers; // declare numbers as an int array of any size numbers = new int[10]; // numbers is a 10-element array numbers = new int[20]; // now it's a 20-element array 声明数组 C# 支持一维数组、多维数组(矩形数组)和数组的数组(交错的数组)。下面的示例展示如何声明不同类型的数组: 一维数组: int[] numbers; 多维数组: string[,] names; 数组的数组(交错的): byte[][] scores; 声明数组(如上所示)并不实际创建它们。在 C# 中,数组是对象(本教程稍后讨论),必须进行实例化。下面的示例展示如何创建数组: 一维数组: int[] numbers = new int[5]; 多维数组: string[,] names = new string[5,4]; 数组的数组(交错的): byte[][] scores = new byte[5][]; for (int x = 0; x < scores.Length; x++) { scores[x] = new byte[4]; } 还可以有更大的数组。例如,可以有三维的矩形数组: int[,,] buttons = new int[4,5,3]; 甚至可以将矩形数组和交错数组混合使用。例如,下面的代码声明了类型为 int 的二维数组的三维数组的一维数组。 int[][,,][,] numbers; 示例 下面是一个完整的 C# 程序,它声明并实例化上面所讨论的数组。 // arrays.cs using System; class DeclareArraysSample { public static void Main() { // Single-dimensional array int[] numbers = new int[5]; // Multidimensional array string[,] names = new string[5,4]; // Array-of-arrays (jagged array) byte[][] scores = new byte[5][]; // Create the jagged array for (int i = 0; i < scores.Length; i++) { scores[i] = new byte[i+3]; } // Print length of each row for (int i = 0; i < scores.Length; i++) { Console.WriteLine("Length of row {0} is {1}", i, scores[i].Length); } } } 输出 Length of row 0 is 3 Length of row 1 is 4 Length of row 2 is 5 Length of row 3 is 6 Length of row 4 is 7 初始化数组 C# 通过将初始值括在大括号 ({}) 内为在声明时初始化数组提供了简单而直接了当的方法。特别要注意的是,如果声明时未初始化数组,则数组成员自动初始化为该数组类型的默认初始值。 下面的示例展示初始化不同类型的数组的各种方法。 一维数组 int[] numbers = new int[5] {1, 2, 3, 4, 5}; string[] names = new string[3] {"Matt", "Joanne", "Robert"}; 可省略数组的大小,如下所示: int[] numbers = new int[] {1, 2, 3, 4, 5}; string[] names = new string[] {"Matt", "Joanne", "Robert"}; 如果提供了初始值设定项,还可省略 new 语句,如下所示: int[] numbers = {1, 2, 3, 4, 5}; string[] names = {"Matt", "Joanne", "Robert"}; 多维数组 int[,] numbers = new int[3, 2] { {1, 2}, {3, 4}, {5, 6} }; string[,] siblings = new string[2, 2] { {"Mike","Amy"}, {"Mary","Albert"} }; 可省略数组的大小,如下所示: int[,] numbers = new int[,] { {1, 2}, {3, 4}, {5, 6} }; string[,] siblings = new string[,] { {"Mike","Amy"}, {"Mary","Ray"} }; 如果提供了初始值设定项,还可省略 new 语句,如下所示: int[,] numbers = { {1, 2}, {3, 4}, {5, 6} }; string[,] siblings = { {"Mike", "Amy"}, {"Mary", "Albert"} }; 交错的数组(数组的数组) 可以像下例所示那样初始化交错的数组: int[][] numbers = new int[2][] { new int[] {2,3,4}, new int[] {5,6,7,8,9} }; 可省略第一个数组的大小,如下所示: int[][] numbers = new int[][] { new int[] {2,3,4}, new int[] {5,6,7,8,9} }; — 或 — int[][] numbers = { new int[] {2,3,4}, new int[] {5,6,7,8,9} }; 请注意,对于交错数组的元素没有初始化语法。 访问数组成员 访问数组成员可以直接进行,类似于在 C/C++ 中访问数组成员。例如,下面的代码创建一个名为 numbers 的数组,然后向该数组的第五个元素赋以 5: int[] numbers = {10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0}; numbers[4] = 5; 下面的代码声明一个多维数组,并向位于 [1, 1] 的成员赋以 5: int[,] numbers = { {1, 2}, {3, 4}, {5, 6}, {7, 8}, {9, 10} }; numbers[1, 1] = 5; 下面声明一个一维交错数组,它包含两个元素。第一个元素是两个整数的数组,第二个元素是三个整数的数组: int[][] numbers = new int[][] { new int[] {1, 2}, new int[] {3, 4, 5} }; 下面的语句向第一个数组的第一个元素赋以 58,向第二个数组的第二个元素赋以 667: numbers[0][0] = 58; numbers[1][1] = 667; 数组是对象 在 C# 中,数组实际上是对象。System.Array 是所有数组类型的抽象基类型。可以使用 System.Array 具有的属性以及其他类成员。这种用法的一个示例是使用“长度”(Length) 属性获取数组的长度。下面的代码将 numbers 数组的长度(为 5)赋给名为 LengthOfNumbers 的变量: int[] numbers = {1, 2, 3, 4, 5}; int LengthOfNumbers = numbers.Length; System.Array 类提供许多有用的其他方法/属性,如用于排序、搜索和复制数组的方法。 对数组使用 foreach C# 还提供 foreach 语句。该语句提供一种简单、明了的方法来循环访问数组的元素。例如,下面的代码创建一个名为 numbers 的数组,并用 foreach 语句循环访问该数组: int[] numbers = {4, 5, 6, 1, 2, 3, -2, -1, 0}; foreach (int i in numbers) { System.Console.WriteLine(i); }
第4楼
我要的是结构数组啊,就是struct类型的数组
第5楼
struct typename(名称) { public aaa; } typename[] testname = new typename[];
第6楼
下列代码示例使用 ASCIIEncoding.GetBytes 方法将 Unicode 字符串转换为字节数组。数组中每个字节表示字符串中该位置字母的 ASCII 值。 [Visual Basic] Dim MyString As String = "Encoding String." Dim AE As New ASCIIEncoding() Dim ByteArray As Byte() = AE.GetBytes(MyString) Dim x as Integer For x = 0 To ByteArray.Length - 1 Console.Write("{0} ", ByteArray(x)) Next [C#] string MyString = "Encoding String."; ASCIIEncoding AE = new ASCIIEncoding(); byte[] ByteArray = AE.GetBytes(MyString); for(int x = 0;x <= ByteArray.Length - 1; x++) { Console.Write("{0} ", ByteArray[x]); } 此示例将下列内容显示到控制台。字节 69 是字符 E 的 ASCII 值,字节 110 是字符 n 的 ASCII 值,等等。 69 110 99 111 100 105 110 103 32 83 116 114 105 110 103 46 下列代码示例使用 ASCIIEncoding 类将前面的字节数组转换为字符数组。GetChars 方法用来解码字节数组。 [Visual Basic] Dim AE As New ASCIIEncoding() Dim ByteArray As Byte() = { 69, 110, 99, 111, 100, 105, 110, 103, 32, 83, 116, 114, 105, 110, 103, 46 } Dim CharArray As Char() = AE.GetChars(ByteArray) Dim x As Integer For x = 0 To CharArray.Length - 1 Console.Write(CharArray(x)) Next [C#] ASCIIEncoding AE = new ASCIIEncoding(); byte[] ByteArray = { 69, 110, 99, 111, 100, 105, 110, 103, 32, 83, 116, 114, 105, 110, 103, 46 }; char[] CharArray = AE.GetChars(ByteArray); for(int x = 0;x <= CharArray.Length - 1; x++) { Console.Write(CharArray[x]); } 以上代码将 Encoding String. 文本显示到控制台