树莓派无线中继为有线网络,第二局域网,DHCP服务器,支持ipv6上网

0.环境

光猫—>主路由器—>5GWiFi—>树莓派—>交换机—>电脑

1.安装依赖

提前连接好WiFi!!!

apt-get install brctl dnsmasq radvd ndp6

2.配置DHCP与radvd以及nat转发设置

vi /etc/dnsmasq.conf
dhcp-sequential-ip
 
dhcp-range=10.96.181.10,10.96.181.240,255.255.255.0,12h
dhcp-range=fd00::22, fd00::44, 64, 12h
resolv-file=/etc/resolv.dnsmasq.conf
enable-ra
vi /etc/radvd.conf
interface br0
{
     AdvSendAdvert on;
     IgnoreIfMissing on;
     prefix 2001:db8:1:0::/64
     
    {
       AdvOnLink on;
       AdvAutonomous on;
       AdvRouterAddr on;
    };
};
vi /etc/sysctl.conf
 net.ipv4.ip_forward=1
 net.ipv6.conf.all.forwarding=1
 net.ipv6.conf.all.proxy_ndp=1
vi /etc/npd6.conf
prefix=2001:db8:1:0::
interface = wlan0

ralogging = off
listtype = none
listlogging = off
collectTargets = 100
linkOption = false
ignoreLocal = true
routerNA = true
maxHops = 255
pollErrorLimit = 20

3.建立网桥,配置ipv6穿透

#!/bin/sh
brctl addbr br0
brctl addif br0 eth0
brctl stp br0 yes
ifconfig br0 10.96.181.1 netmask 255.255.255.0 up
ifconfig eth0 0.0.0.0 up
iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
ifconfig br0 inet6 add 2001:db8:1:0:33fa:24b1/64					#网桥ipv6地址
ip6tables -t nat -A POSTROUTING -s 2001:db8:1:0::/64 -j MASQUERADE #内网IPV6前缀,与/etc/radvd.conf一致
ip -6 route add 2000::/3 via fe80::6609:80ff:fe71:a3f4 dev wlan0	#广域网IPV6网关
ifconfig eth0 0.0.0.0 up

注意设置广域网ipv6网关
注意eth0不要设置ip否则无法上网

4.检查服务并重启

service dnsmasq start
service radvd start
service npd6 start

将第三步设置开机自动执行即可

本文所有参考

https://blog.csdn.net/pengluer/article/details/6222749
https://blog.csdn.net/xrfsycg/article/details/8663018?utm_source=blogxgwz3
https://my.oschina.net/u/2306127/blog/813483
https://blog.csdn.net/wr132/article/details/78986190
https://blog.cyyself.name/2018/09/raspberry-pi-as-wifi-router/
https://www.cnblogs.com/kekeoutlook/p/11123062.html

  • 0
    点赞
  • 0
    评论
  • 2
    收藏
  • 一键三连
    一键三连
  • 扫一扫,分享海报

相关推荐
©️2020 CSDN 皮肤主题: 深蓝海洋 设计师:CSDN官方博客 返回首页
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、C币套餐、付费专栏及课程。

余额充值