S5PV210之X210平台刷机注意事项

S5PV210之X210平台刷机注意事项

kernel支持nfs根文件系统

1.配置网络部分，主要是使能CONFIG_IP_PNP以在2中能够看到Root file system on NFS选项
Networking support
Networking options
TCP/IP networking
IP: kernel level autoconfiguration
[*] IP: DHCP support
[*] IP: BOOTP support
2.配置开启nfs服务
File systems —>
Network File Systems —>
<*> NFS client support
[*] NFS client support for NFS version 3
[*] NFS client support for the NFSv3 ACL protocol extension
[*] NFS client support for NFS version 4 (EXPERIMENTAL)
[*] NFS client support for NFSv4.1 (DEVELOPER ONLY)
[*] Root file system on NFS

uboot bootargs修改

1.nfs根文件系统启动参数设置
set bootargs root=/dev/nfs nfsroot=169.254.28.10:/root/porting_x210/rootfs/rootfs ip=169.254.28.100:169.254.28.10:169.254.28.1:255.255.255.0::eth0:off init=/linuxrc console=ttySAC2,115200
2.启动介质中根文件系统启动参数设置
set bootargs console=ttySAC2,115200 root=/dev/mmcblk0p2 rw init=/linuxrc rootfstype=ext3

刷机方法

1.烧写uboot
fastboot flash bootloader uboot.bin
2.烧写kernel
fastboot flash kernelzImage
3.烧写rootfs
fastboot flash system rootfs.ext3

ext2根文件系统制作

1.创建挂载文件夹

mkdir ext2_rootfs
dd if=/dev/zero of=rootfs.ext2 bs=1024 count=51200
losetup  /dev/loop1 rootfs.ext2
mke2fs -m 0 /dev/loop1 51200
mount -t ext2 /dev/loop1 ./ext2_rootfs/

2.根文件系统填充数据
进入ext2_rootfs目录，将所有的rootfs里面的内容复制到本文件夹中

cd ext2_rootfs
cp ../rootfs/* ./ -rf

3.解除挂载

umount /dev/loop1
losetup -d /dev/loop1

经过以上步骤即可得到ext2格式的rootfs rootfs.ext2