scull-scull.h

本文介绍了Linux设备驱动一书中scull模块的源代码细节。scull模块通过定义内存区域来模拟字符设备,支持动态分配和释放内存。文章还详细解释了scull模块中用于调试、设备配置和内存管理的相关宏与数据结构。
摘要由CSDN通过智能技术生成
/*
 * scull.h -- definitions for the char module
 *
 * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
 * Copyright (C) 2001 O'Reilly & Associates
 *
 * The source code in this file can be freely used, adapted,
 * and redistributed in source or binary form, so long as an
 * acknowledgment appears in derived source files.  The citation
 * should list that the code comes from the book "Linux Device
 * Drivers" by Alessandro Rubini and Jonathan Corbet, published
 * by O'Reilly & Associates.   No warranty is attached;
 * we cannot take responsibility for errors or fitness for use.
 *
 * $Id: scull.h,v 1.15 2004/11/04 17:51:18 rubini Exp $
 */

#ifndef _SCULL_H_
#define _SCULL_H_

#include <linux/ioctl.h> /* needed for the _IOW etc stuff used later */

/*
 * Macros to help debugging
 */

#undef PDEBUG             /* undef it, just in case */
#ifdef SCULL_DEBUG
#  ifdef __KERNEL__
     /* This one if debugging is on, and kernel space */
#    define PDEBUG(fmt, args...) printk( KERN_DEBUG "scull: " fmt, ## args)
#  else
     /* This one for user space */
#    define PDEBUG(fmt, args...) fprintf(stderr, fmt, ## args)
#  endif
#else
#  define PDEBUG(fmt, args...) /* not debugging: nothing */
#endif

#undef PDEBUGG
#define PDEBUGG(fmt, args...) /* nothing: it's a placeholder */

#ifndef SCULL_MAJOR
#define SCULL_MAJOR 0   /* dynamic major by default */
#endif

#ifndef SCULL_NR_DEVS
#define SCULL_NR_DEVS 4    /* scull0 through scull3 */
#endif

#ifndef SCULL_P_NR_DEVS
#define SCULL_P_NR_DEVS 4  /* scullpipe0 through scullpipe3 */
#endif

/*
 * The bare device is a variable-length region of memory.
 * Use a linked list of indirect blocks.
 *
 * "scull_dev->data" points to an array of pointers, each
 * pointer refers to a memory area of SCULL_QUANTUM bytes.
 *
 * The array (quantum-set) is SCULL_QSET long.
 */
#ifndef SCULL_QUANTUM
#define SCULL_QUANTUM 4000
#endif

#ifndef SCULL_QSET
#define SCULL_QSET    1000
#endif

/*
 * The pipe device is a simple circular buffer. Here its default size
 */
#ifndef SCULL_P_BUFFER
#define SCULL_P_BUFFER 4000
#endif

/*
 * Representation of scull quantum sets.
 */
struct scull_qset {
	void **data;
	struct scull_qset *next;
};

struct scull_dev {
	struct scull_qset *data;  /* Pointer to first quantum set */
	int quantum;              /* the current quantum size */
	int qset;                 /* the current array size */
	unsigned long size;       /* amount of data stored here */
	unsigned int access_key;  /* used by sculluid and scullpriv */
	struct semaphore sem;     /* mutual exclusion semaphore     */
	struct cdev cdev;	  /* Char device structure		*/
};

/*
 * Split minors in two parts
 */
#define TYPE(minor)	(((minor) >> 4) & 0xf)	/* high nibble */
#define NUM(minor)	((minor) & 0xf)		/* low  nibble */


/*
 * The different configurable parameters
 */
extern int scull_major;     /* main.c */
extern int scull_nr_devs;
extern int scull_quantum;
extern int scull_qset;

extern int scull_p_buffer;	/* pipe.c */


/*
 * Prototypes for shared functions
 */

int     scull_p_init(dev_t dev);
void    scull_p_cleanup(void);
int     scull_access_init(dev_t dev);
void    scull_access_cleanup(void);

int     scull_trim(struct scull_dev *dev);

ssize_t scull_read(struct file *filp, char __user *buf, size_t count,
                   loff_t *f_pos);
ssize_t scull_write(struct file *filp, const char __user *buf, size_t count,
                    loff_t *f_pos);
loff_t  scull_llseek(struct file *filp, loff_t off, int whence);
int     scull_ioctl(struct inode *inode, struct file *filp,
                    unsigned int cmd, unsigned long arg);


/*
 * Ioctl definitions
 */

/* Use 'k' as magic number */
#define SCULL_IOC_MAGIC  'k'
/* Please use a different 8-bit number in your code */

#define SCULL_IOCRESET    _IO(SCULL_IOC_MAGIC, 0)

/*
 * S means "Set" through a ptr,
 * T means "Tell" directly with the argument value
 * G means "Get": reply by setting through a pointer
 * Q means "Query": response is on the return value
 * X means "eXchange": switch G and S atomically
 * H means "sHift": switch T and Q atomically
 */
#define SCULL_IOCSQUANTUM _IOW(SCULL_IOC_MAGIC,  1, int)
#define SCULL_IOCSQSET    _IOW(SCULL_IOC_MAGIC,  2, int)
#define SCULL_IOCTQUANTUM _IO(SCULL_IOC_MAGIC,   3)
#define SCULL_IOCTQSET    _IO(SCULL_IOC_MAGIC,   4)
#define SCULL_IOCGQUANTUM _IOR(SCULL_IOC_MAGIC,  5, int)
#define SCULL_IOCGQSET    _IOR(SCULL_IOC_MAGIC,  6, int)
#define SCULL_IOCQQUANTUM _IO(SCULL_IOC_MAGIC,   7)
#define SCULL_IOCQQSET    _IO(SCULL_IOC_MAGIC,   8)
#define SCULL_IOCXQUANTUM _IOWR(SCULL_IOC_MAGIC, 9, int)
#define SCULL_IOCXQSET    _IOWR(SCULL_IOC_MAGIC,10, int)
#define SCULL_IOCHQUANTUM _IO(SCULL_IOC_MAGIC,  11)
#define SCULL_IOCHQSET    _IO(SCULL_IOC_MAGIC,  12)

/*
 * The other entities only have "Tell" and "Query", because they're
 * not printed in the book, and there's no need to have all six.
 * (The previous stuff was only there to show different ways to do it.
 */
#define SCULL_P_IOCTSIZE _IO(SCULL_IOC_MAGIC,   13)
#define SCULL_P_IOCQSIZE _IO(SCULL_IOC_MAGIC,   14)
/* ... more to come */

#define SCULL_IOC_MAXNR 14

#endif /* _SCULL_H_ */


评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值