Sublime Text 2 设置文件详解

// While you can edit this file, it’s best to put your changes in
// "User/Preferences.sublime-settings", which overrides the settings in here.
//
// Settings may also be placed in file type specific options files, for
// example, in Packages/Python/Python.sublime-settings for python files.
{
// Sets the colors used within the text area
// 主题文件的路径
" color_scheme " : " Packages/Color Scheme – Default/Monokai.tmTheme " ,
 
// Note that the font_face and font_size are overriden in the platform
// specific settings file, for example, "Preferences (Linux).sublime-settings".
// Because of this, setting them here will have no effect: you must set them
// in your User File Preferences.
// 设置字体和大小，必须在Settings-User里重写，这里设置没有任何效果
" font_face " : " Consolas " ,
" font_size " : 12 ,
 
// Valid options are "no_bold", "no_italic", "no_antialias", "gray_antialias",
// "subpixel_antialias" and "no_round" (OS X only)
// 字体选项：no_bold不显示粗体字，no_italic不显示斜体字，no_antialias和no_antialias关闭反锯齿
// subpixel_antialias和no_round是OS X系统独有的
" font_options " : [] ,
 
// Characters that are considered to separate words
// 在文字上双击会全选当前的内容，如果里面出现以下字符，就会被截断
" word_separators " : " ./ \\ () \" ‘-:,.;<>~!@#$%^&*|+=[]{}`~? " ,
 
// Set to false to prevent line numbers being drawn in the gutter
// 是否显示行号
" line_numbers " : true ,
 
// Set to false to hide the gutter altogether
// 是否显示行号边栏
" gutter " : true ,
 
// Spacing between the gutter and the text
// 行号边栏和文字的间距
" margin " : 4 ,
 
// Fold buttons are the triangles shown in the gutter to fold regions of text
// 是否显示代码折叠按钮
" fold_buttons " : true ,
 
// Hides the fold buttons unless the mouse is over the gutter
// 不管鼠标在不在行号边栏，代码折叠按钮一直显示
" fade_fold_buttons " : true ,
 
// Columns in which to display vertical rulers
//列显示垂直标尺，在中括号里填入数字，宽度按字符计算
" rulers " : [] ,
 
// Set to true to turn spell checking on by default
// 是否打开拼写检查
" spell_check " : false ,
 
// The number of spaces a tab is considered equal to
// Tab键制表符宽度
" tab_size " : 4 ,
 
// Set to true to insert spaces when tab is pressed
// 设为true时，缩进和遇到Tab键时使用空格替代
" translate_tabs_to_spaces " : false ,
 
// If translate_tabs_to_spaces is true, use_tab_stops will make tab and
// backspace insert/delete up to the next tabstop
// translate_tabs_to_spaces设置为true，Tab和Backspace的删除/插入作用于制表符宽度
// 否则作用于单个空格
" use_tab_stops " : true ,
 
// Set to false to disable detection of tabs vs. spaces on load
// false时禁止在载入的时候检测制表符和空格
" detect_indentation " : true ,
 
// Calculates indentation automatically when pressing enter
// 按回车时，自动与制表位对齐
" auto_indent " : true ,
 
// Makes auto indent a little smarter, e.g., by indenting the next line
// after an if statement in C. Requires auto_indent to be enabled.
//针对C语言的
" smart_indent " : false ,
 
// Adds whitespace up to the first open bracket when indenting. Requires
// auto_indent to be enabled.
// 需要启用auto_indent，第一次打开括号缩进时插入空格？（没测试出来效果…）
" indent_to_bracket " : true ,
 
// Trims white space added by auto_indent when moving the caret off the
// line.
// 显示对齐的白线是否根据回车、tab等操作自动填补
" trim_automatic_white_space " : true ,
 
// Disables horizontal scrolling if enabled.
// May be set to true, false, or "auto", where it will be disabled for
// source code, and otherwise enabled.
// 是否自动换行，如果选auto，需要加双引号
" word_wrap " : false ,
 
// Set to a value other than 0 to force wrapping at that column rather than the
// window width
// 设置窗口内文字区域的宽度
" wrap_width " : 0 ,
 
// Set to false to prevent word wrapped lines from being indented to the same
// level
// 防止被缩进到同一级的字换行
" indent_subsequent_lines " : true ,
 
// Draws text centered in the window rather than left aligned
// 如果没有定义过，则文件居中显示（比如新建的文件）
" draw_centered " : false ,
 
// Controls auto pairing of quotes, brackets etc
// 自动匹配引号，括号等
" auto_match_enabled " : true ,
 
// Word list to use for spell checking
// 拼写检查的单词列表路径
" dictionary " : " Packages/Language – English/en_US.dic " ,
 
// Set to true to draw a border around the visible rectangle on the minimap.
// The color of the border will be determined by the "minimapBorder" key in
// the color scheme
// 代码地图的可视区域部分是否加上边框，边框的颜色可在配色方案上加入minimapBorder键
" draw_minimap_border " : false ,
 
// If enabled, will highlight any line with a caret
// 突出显示当前光标所在的行
" highlight_line " : false ,
 
// Valid values are "smooth", "phase", "blink", "wide" and "solid".
// 设置光标闪动方式
" caret_style " : " smooth " ,
 
// Set to false to disable underlining the brackets surrounding the caret
// 是否特殊显示当前光标所在的括号、代码头尾闭合标记
" match_brackets " : true ,
 
// Set to false if you’d rather only highlight the brackets when the caret is
// next to one
// 设为false时，只有光标在括号或头尾闭合标记的两端时，match_brackets才生效
" match_brackets_content " : true ,
 
// Set to false to not highlight square brackets. This only takes effect if
// match_brackets is true
// 是否突出显示圆括号，match_brackets为true生效
" match_brackets_square " : false ,
 
// Set to false to not highlight curly brackets. This only takes effect if
// match_brackets is true
// 是否突出显示大括号，match_brackets为true生效
" match_brackets_braces " : false ,
 
// Set to false to not highlight angle brackets. This only takes effect if
// match_brackets is true
// 是否突出显示尖括号，match_brackets为true生效
" match_brackets_angle " : false ,
 
// Enable visualization of the matching tag in HTML and XML
// html和xml下突出显示光标所在标签的两端，影响HTML、XML、CSS等
" match_tags " : true ,
 
// Highlights other occurrences of the currently selected text
// 全文突出显示和当前选中字符相同的字符
" match_selection " : true ,
 
// Additional spacing at the top of each line, in pixels
// 设置每一行到顶部，以像素为单位的间距，效果相当于行距
" line_padding_top " : 1 ,
 
// Additional spacing at the bottom of each line, in pixels
// 设置每一行到底部，以像素为单位的间距，效果相当于行距
" line_padding_bottom " : 1 ,
 
// Set to false to disable scrolling past the end of the buffer.
// On OS X, this value is overridden in the platform specific settings, so
// you’ll need to place this line in your user settings to override it.
// 设置为false时，滚动到文本的最下方时，没有缓冲区
" scroll_past_end " : true ,
 
// This controls what happens when pressing up or down when on the first
// or last line.
// On OS X, this value is overridden in the platform specific settings, so
// you’ll need to place this line in your user settings to override it.
// 控制向上或向下到第一行或最后一行时发生什么（没明白也没试出来）
" move_to_limit_on_up_down " : false ,
 
// Set to "none" to turn off drawing white space, "selection" to draw only the
// white space within the selection, and "all" to draw all white space
// 按space或tab时，实际会产生白色的点（一个空格一个点）或白色的横线（tab_size设置的制表符的宽度），选中状态下才能看到
// 设置为none时，什么情况下都不显示这些点和线
// 设置为selection时，只显示选中状态下的点和线
// 设置为all时，则一直显示
" draw_white_space " : " selection " ,
 
// Set to false to turn off the indentation guides.
// The color and width of the indent guides may be customized by editing
// the corresponding .tmTheme file, and specifying the colors "guide",
// "activeGuide" and "stackGuide"
// 制表位的对齐白线是否显示，颜色可在主题文件里设置（guide，activeGuide，stackGuide）
" draw_indent_guides " : true ,
 
// Controls how the indent guides are drawn, valid options are
// "draw_normal" and "draw_active". draw_active will draw the indent
// guides containing the caret in a different color.
// 制表位的对齐白线，draw_normal为一直显示，draw_active为只显示当前光标所在的代码控制域
" indent_guide_options " : [ " draw_normal " ] ,
 
// Set to true to removing trailing white space on save
// 为true时，保存文件时会删除每行结束后多余的空格
" trim_trailing_white_space_on_save " : false ,
 
// Set to true to ensure the last line of the file ends in a newline
// character when saving
// 为true时，保存文件时光标会在文件的最后向下换一行
" ensure_newline_at_eof_on_save " : false ,
 
// Set to true to automatically save files when switching to a different file
// or application
// 切换到其它文件标签或点击其它非本软件区域，文件自动保存
" save_on_focus_lost " : false ,
 
// The encoding to use when the encoding can’t be determined automatically.
// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
// 编码时不能自动检测编码时，将自动检测ASCII, UTF-8 和 UTF-16
" fallback_encoding " : " Western (Windows 1252) " ,
 
// Encoding used when saving new files, and files opened with an undefined
// encoding (e.g., plain ascii files). If a file is opened with a specific
// encoding (either detected or given explicitly), this setting will be
// ignored, and the file will be saved with the encoding it was opened
// with.
// 默认编码格式
" default_encoding " : " UTF-8 " ,
 
// Files containing null bytes are opened as hexadecimal by default
// 包含空字节的文件被打开默认为十六进制
" enable_hexadecimal_encoding " : true ,
 
// Determines what character(s) are used to terminate each line in new files.
// Valid values are ‘system’ (whatever the OS uses), ‘windows’ (CRLF) and
// ‘unix’ (LF only).
// 每一行结束的时候用什么字符做终止符
" default_line_ending " : " system " ,
 
// When enabled, pressing tab will insert the best matching completion.
// When disabled, tab will only trigger snippets or insert a tab.
// Shift+tab can be used to insert an explicit tab when tab_completion is
// enabled.
// 设置为enabled时，在一个字符串间按Tab将插入一个制表符
// 设置为true时，按Tab会根据前后环境进行代码自动匹配填补
" tab_completion " : true ,
 
// Enable auto complete to be triggered automatically when typing.
// 代码提示
" auto_complete " : true ,
 
// The maximum file size where auto complete will be automatically triggered.
// 代码提示的大小限制
" auto_complete_size_limit " : 4194304 ,
 
// The delay, in ms, before the auto complete window is shown after typing
// 代码提示延迟显示
" auto_complete_delay " : 50 ,
 
// Controls what scopes auto complete will be triggered in
// 代码提示的控制范围
" auto_complete_selector " : " source – comment " ,
 
// Additional situations to trigger auto complete
// 触发代码提示的其他情况
" auto_complete_triggers " : [ { " selector " : " text.html " , " characters " : " < " } ] ,
 
// By default, auto complete will commit the current completion on enter.
// This setting can be used to make it complete on tab instead.
// Completing on tab is generally a superior option, as it removes
// ambiguity between committing the completion and inserting a newline.
// 设为false时，选择提示的代码按回车或点击可以输出出来，但选择true时不会输出而是直接换行
" auto_complete_commit_on_tab " : false ,
 
// Controls if auto complete is shown when snippet fields are active.
// Only relevant if auto_complete_commit_on_tab is true.
// auto_complete_commit_on_tab必须为true，控制代码提示的活跃度（没明白…）
" auto_complete_with_fields " : false ,
 
// By default, shift+tab will only unindent if the selection spans
// multiple lines. When pressing shift+tab at other times, it’ll insert a
// tab character – this allows tabs to be inserted when tab_completion is
// enabled. Set this to true to make shift+tab always unindent, instead of
// inserting tabs.
// 设置为false，使用Shift + tab总是插入制表符
" shift_tab_unindent " : true ,
 
// If true, the selected text will be copied into the find panel when it’s
// shown.
// On OS X, this value is overridden in the platform specific settings, so
// you’ll need to place this line in your user settings to override it.
// 选中的文本按Ctrl + f时，自动复制到查找面板的文本框里
" find_selected_text " : true ,
 
//
// User Interface Settings
//
 
// The theme controls the look of Sublime Text’s UI (buttons, tabs, scroll bars, etc)
// Data\Packages\Theme – Default\Default.sublime-theme控制软件的主题
" theme " : " Default.sublime-theme " ,
 
// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
// scroll slower, or set to larger than 1 to scroll faster
// 滚动的速度
" scroll_speed " : 1.0 ,
 
// Controls side bar animation when expanding or collapsing folders
// 左边边栏文件夹动画
" tree_animation_enabled " : true ,
// 标签页的关闭按钮
" show_tab_close_buttons " : true ,
 
// OS X 10.7 only: Set to true to disable Lion style full screen support.
// Sublime Text must be restarted for this to take effect.
// 针对OS X
" use_simple_full_screen " : false ,
 
// Valid values are "system", "enabled" and "disabled"
// 水平垂直滚动条：system和disabled为默认显示方式，enabled为自动隐藏显示
" overlay_scroll_bars " : " system " ,
 
//
// Application Behavior Settings
//
 
// Exiting the application with hot_exit enabled will cause it to close
// immediately without prompting. Unsaved modifications and open files will
// be preserved and restored when next starting.
//
// Closing a window with an associated project will also close the window
// without prompting, preserving unsaved changes in the workspace file
// alongside the project.
// 热推出功能！退出时不会提示是否保存文件，而是直接退出
// 下次打开软件时，文件保持退出前的状态，没来得及保存的内容都在，但并没有真实的写在原文件里
" hot_exit " : true ,
 
// remember_open_files makes the application start up with the last set of
// open files. Changing this to false will have no effect if hot_exit is
// true
// 软件使用最后的设定打开文件，hot_exit为true时没有效果
" remember_open_files " : true ,
 
// OS X only: When files are opened from finder, or by dragging onto the
// dock icon, this controls if a new window is created or not.
// 针对OS X
" open_files_in_new_window " : true ,
 
// Set to true to close windows as soon as the last file is closed, unless
// there’s a folder open within the window. This is always enabled on OS X,
// changing it here won’t modify the behavior.
// 针对OS X
" close_windows_when_empty " : true ,
// 哪些文件会被显示到边栏上
// folder_exclude_patterns and file_exclude_patterns control which files
// are listed in folders on the side bar. These can also be set on a per-
// project basis.
" folder_exclude_patterns " : [ " .svn " , " .git " , " .hg " , " CVS " ] ,
" file_exclude_patterns " : [ " *.pyc " , " *.pyo " , " *.exe " , " *.dll " , " *.obj " , " *.o " , " *.a " , " *.lib " , " *.so " , " *.dylib " , " *.ncb " , " *.sdf " , " *.suo " , " *.pdb " , " *.idb " , " .DS_Store " , " *.class " , " *.psd " , " *.db " ] ,
// These files will still show up in the side bar, but won’t be included in
// Goto Anything or Find in Files
" binary_file_patterns " : [ " *.jpg " , " *.jpeg " , " *.png " , " *.gif " , " *.ttf " , " *.tga " , " *.dds " , " *.ico " , " *.eot " , " *.pdf " , " *.swf " , " *.jar " , " *.zip " ] ,
 
// List any packages to ignore here. When removing entries from this list,
// a restart may be required if the package contains plugins.
// 删除你想要忽略的插件，需要重启
" ignored_packages " : [ " Vintage " ]
}






====================================
快捷键：

Ctrl+L	选择整行(按住-继续选择下行)
Ctrl+KK	从光标处删除至行尾
Ctrl+Shift+K	删除整行
Ctrl+Shift+D	复制光标所在整行，插入在该行之前
Ctrl+J	合并行(已选择需要合并的多行时)
Ctrl+KU	改为大写
Ctrl+KL	改为小写
Ctrl+D	选词(按住-继续选择下个相同的字符串)
Ctrl+M	光标移动至括号内开始或结束的位置
Ctrl+Shift+M	选择括号内的内容(按住-继续选择父括号)
Ctrl+/	注释整行(如已选择内容，同“Ctrl+Shift+/”效果)
Ctrl+Shift+/	注释已选择内容
Ctrl+Space	自动完成(win与系统快捷键冲突，需修改)
Ctrl+Z	撤销
Ctrl+Y	恢复撤销
Ctrl+Shift+V	粘贴并自动缩进(其它兄弟写的，实测win系统自动缩进无效)
Ctrl+M	光标跳至对应的括号
Alt+.	闭合当前标签
Ctrl+Shift+A	选择光标位置父标签对儿
Ctrl+Shift+[	折叠代码
Ctrl+Shift+]	展开代码
Ctrl+KT	折叠属性
Ctrl+K0	展开所有
Ctrl+U	软撤销
Ctrl+T	词互换
Ctrl+Enter	插入行后
Ctrl+Shift Enter	插入行前
Ctrl+K Backspace	从光标处删除至行首
Ctrl+Shift+UP	与上行互换
Ctrl+Shift+DOWN	与下行互换
Shift+Tab	去除缩进
Tab	缩进
F9	行排序(按a-z)

本文出自 “Mr_Z” 博客，请务必保留此出处http://zhangrong.blog.51cto.com/2196532/1059867