这里主要是枚举和配置相关的:
configEnum syslog_facility_enum[] = {
{"user", LOG_USER},
{"local0", LOG_LOCAL0},
{"local1", LOG_LOCAL1},
{"local2", LOG_LOCAL2},
{"local3", LOG_LOCAL3},
{"local4", LOG_LOCAL4},
{"local5", LOG_LOCAL5},
{"local6", LOG_LOCAL6},
{"local7", LOG_LOCAL7},
{NULL, 0}
};
configEnum loglevel_enum[] = {
{"debug", LL_DEBUG},
{"verbose", LL_VERBOSE},
{"notice", LL_NOTICE},
{"warning", LL_WARNING},
{NULL,0}
};
configEnum supervised_mode_enum[] = {
{"upstart", SUPERVISED_UPSTART},
{"systemd", SUPERVISED_SYSTEMD},
{"auto", SUPERVISED_AUTODETECT},
{"no", SUPERVISED_NONE},
{NULL, 0}
};
configEnum aof_fsync_enum[] = {
{"everysec", AOF_FSYNC_EVERYSEC},
{"always", AOF_FSYNC_ALWAYS},
{"no", AOF_FSYNC_NO},
{NULL, 0}
};
configEnum repl_diskless_load_enum[] = {
{"disabled", REPL_DISKLESS_LOAD_DISABLED},
{"on-empty-db", REPL_DISKLESS_LOAD_WHEN_DB_EMPTY},
{"swapdb", REPL_DISKLESS_LOAD_SWAPDB},
{NULL, 0}
};
configEnum tls_auth_clients_enum[] = {
{"no", TLS_CLIENT_AUTH_NO},
{"yes", TLS_CLIENT_AUTH_YES},
{"optional", TLS_CLIENT_AUTH_OPTIONAL},
{NULL, 0}
};
configEnum oom_score_adj_enum[] = {
{"no", OOM_SCORE_ADJ_NO},
{"yes", OOM_SCORE_RELATIVE},
{"relative", OOM_SCORE_RELATIVE},
{"absolute", OOM_SCORE_ADJ_ABSOLUTE},
{NULL, 0}
};
configEnum acl_pubsub_default_enum[] = {
{"allchannels", USER_FLAG_ALLCHANNELS},
{"resetchannels", 0},
{NULL, 0}
};
configEnum sanitize_dump_payload_enum[] = {
{"no", SANITIZE_DUMP_NO},
{"yes", SANITIZE_DUMP_YES},
{"clients", SANITIZE_DUMP_CLIENTS},
{NULL, 0}
};
/* Output buffer limits presets. */
clientBufferLimitsConfig clientBufferLimitsDefaults[CLIENT_TYPE_OBUF_COUNT] = {
{0, 0, 0}, /* normal */
{1024*1024*256, 1024*1024*64, 60}, /* slave */
{1024*1024*32, 1024*1024*8, 60} /* pubsub */
};
/* OOM Score defaults */
int configOOMScoreAdjValuesDefaults[CONFIG_OOM_COUNT] = { 0, 200, 800 };
/* Generic config infrastructure function pointers
* int is_valid_fn(val, err)
* Return 1 when val is valid, and 0 when invalid.
* Optionally set err to a static error string.
* int update_fn(val, prev, err)
* This function is called only for CONFIG SET command (not at config file parsing)
* It is called after the actual config is applied,
* Return 1 for success, and 0 for failure.
* Optionally set err to a static error string.
* On failure the config change will be reverted.
*/
/* Configuration values that require no special handling to set, get, load or
* rewrite. */
typedef struct boolConfigData {
int *config; /* The pointer to the server config this value is stored in */
const int default_value; /* The default value of the config on rewrite */
int (*is_valid_fn)(int val, const char **err); /* Optional function to check validity of new value (generic doc above) */
int (*update_fn)(int val, int prev, const char **err); /* Optional function to apply new value at runtime (generic doc above) */
} boolConfigData;
typedef struct stringConfigData {
char **config; /* Pointer to the server config this value is stored in. */
const char *default_value; /* Default value of the config on rewrite. */
int (*is_valid_fn)(char* val, const char **err); /* Optional function to check validity of new value (generic doc above) */
int (*update_fn)(char* val, char* prev, const char **err); /* Optional function to apply new value at runtime (generic doc above) */
int convert_empty_to_null; /* Boolean indicating if empty strings should
be stored as a NULL value. */
} stringConfigData;
typedef struct sdsConfigData {
sds *config; /* Pointer to the server config this value is stored in. */
const char *default_value; /* Default value of the config on rewrite. */
int (*is_valid_fn)(sds val, const char **err); /* Optional function to check validity of new value (generic doc above) */
int (*update_fn)(sds val, sds prev, const char **err); /* Optional function to apply new value at runtime (generic doc above) */
int convert_empty_to_null; /* Boolean indicating if empty SDS strings should
be stored as a NULL value. */
} sdsConfigData;
typedef struct enumConfigData {
int *config; /* The pointer to the server config this value is stored in */
configEnum *enum_value; /* The underlying enum type this data represents */
const int default_value; /* The default value of the config on rewrite */
int (*is_valid_fn)(int val, const char **err); /* Optional function to check validity of new value (generic doc above) */
int (*update_fn)(int val, int prev, const char **err); /* Optional function to apply new value at runtime (generic doc above) */
} enumConfigData;
typedef enum numericType {
NUMERIC_TYPE_INT,
NUMERIC_TYPE_UINT,
NUMERIC_TYPE_LONG,
NUMERIC_TYPE_ULONG,
NUMERIC_TYPE_LONG_LONG,
NUMERIC_TYPE_ULONG_LONG,
NUMERIC_TYPE_SIZE_T,
NUMERIC_TYPE_SSIZE_T,
NUMERIC_TYPE_OFF_T,
NUMERIC_TYPE_TIME_T,
} numericType;
typedef struct numericConfigData {
union {
int *i;
unsigned int *ui;
long *l;
unsigned long *ul;
long long *ll;
unsigned long long *ull;
size_t *st;
ssize_t *sst;
off_t *ot;
time_t *tt;
} config; /* The pointer to the numeric config this value is stored in */
int is_memory; /* Indicates if this value can be loaded as a memory value */
numericType numeric_type; /* An enum indicating the type of this value */
long long lower_bound; /* The lower bound of this numeric value */
long long upper_bound; /* The upper bound of this numeric value */
const long long default_value; /* The default value of the config on rewrite */
int (*is_valid_fn)(long long val, const char **err); /* Optional function to check validity of new value (generic doc above) */
int (*update_fn)(long long val, long long prev, const char **err); /* Optional function to apply new value at runtime (generic doc above) */
} numericConfigData;
typedef union typeData {
boolConfigData yesno;
stringConfigData string;
sdsConfigData sds;
enumConfigData enumd;
numericConfigData numeric;
} typeData;
typedef struct typeInterface {
/* Called on server start, to init the server with default value */
void (*init)(typeData data);
/* Called on server startup and CONFIG SET, returns 1 on success, 0 on error
* and can set a verbose err string, update is true when called from CONFIG SET */
int (*set)(typeData data, sds value, int update, const char **err);
/* Called on CONFIG GET, required to add output to the client */
void (*get)(client *c, typeData data);
/* Called on CONFIG REWRITE, required to rewrite the config state */
void (*rewrite)(typeData data, const char *name, struct rewriteConfigState *state);
} typeInterface;
typedef struct standardConfig {
const char *name; /* The user visible name of this config */
const char *alias; /* An alias that can also be used for this config */
const unsigned int flags; /* Flags for this specific config */
typeInterface interface; /* The function pointers that define the type interface */
typeData data; /* The type specific data exposed used by the interface */
} standardConfig;
#define MODIFIABLE_CONFIG 0 /* This is the implied default for a standard
* config, which is mutable. */
#define IMMUTABLE_CONFIG (1ULL<<0) /* Can this value only be set at startup? */
#define SENSITIVE_CONFIG (1ULL<<1) /* Does this value contain sensitive information */
standardConfig configs[];
/*-----------------------------------------------------------------------------
* Enum access functions
*----------------------------------------------------------------------------*/
/* Get enum value from name. If there is no match INT_MIN is returned. */
int configEnumGetValue(configEnum *ce, char *name) {
while(ce->name != NULL) {
if (!strcasecmp(ce->name,name)) return ce->val;
ce++;
}
return INT_MIN;
}
/* Get enum name from value. If no match is found NULL is returned. */
const char *configEnumGetName(configEnum *ce, int val) {
while(ce->name != NULL) {
if (ce->val == val) return ce->name;
ce++;
}
return NULL;
}
/* Wrapper for configEnumGetName() returning "unknown" instead of NULL if
* there is no match. */
const char *configEnumGetNameOrUnknown(configEnum *ce, int val) {
const char *name = configEnumGetName(ce,val);
return name ? name : "unknown";
}
/* Used for INFO generation. */
const char *evictPolicyToString(void) {
return configEnumGetNameOrUnknown(maxmemory_policy_enum,server.maxmemory_policy);
}
/*-----------------------------------------------------------------------------
* Config file parsing
*----------------------------------------------------------------------------*/
int yesnotoi(char *s) {
if (!strcasecmp(s,"yes")) return 1;
else if (!strcasecmp(s,"no")) return 0;
else return -1;
}
void appendServerSaveParams(time_t seconds, int changes) {
server.saveparams = zrealloc(server.saveparams,sizeof(struct saveparam)*(server.saveparamslen+1));
server.saveparams[server.saveparamslen].seconds = seconds;
server.saveparams[server.saveparamslen].changes = changes;
server.saveparamslen++;
}
void resetServerSaveParams(void) {
zfree(server.saveparams);
server.saveparams = NULL;
server.saveparamslen = 0;
}
void queueLoadModule(sds path, sds *argv, int argc) {
int i;
struct moduleLoadQueueEntry *loadmod;
loadmod = zmalloc(sizeof(struct moduleLoadQueueEntry));
loadmod->argv = zmalloc(sizeof(robj*)*argc);
loadmod->path = sdsnew(path);
loadmod->argc = argc;
for (i = 0; i < argc; i++) {
loadmod->argv[i] = createRawStringObject(argv[i],sdslen(argv[i]));
}
listAddNodeTail(server.loadmodule_queue,loadmod);
}
/* Parse an array of CONFIG_OOM_COUNT sds strings, validate and populate
* server.oom_score_adj_values if valid.
*/
static int updateOOMScoreAdjValues(sds *args, const char **err, int apply) {
int i;
int values[CONFIG_OOM_COUNT];
for (i = 0; i < CONFIG_OOM_COUNT; i++) {
char *eptr;
long long val = strtoll(args[i], &eptr, 10);
if (*eptr != '\0' || val < -2000 || val > 2000) {
if (err) *err = "Invalid oom-score-adj-values, elements must be between -2000 and 2000.";
return C_ERR;
}
values[i] = val;
}
/* Verify that the values make sense. If they don't omit a warning but
* keep the configuration, which may still be valid for privileged processes.
*/
if (values[CONFIG_OOM_REPLICA] < values[CONFIG_OOM_MASTER] ||
values[CONFIG_OOM_BGCHILD] < values[CONFIG_OOM_REPLICA]) {
serverLog(LOG_WARNING,
"The oom-score-adj-values configuration may not work for non-privileged processes! "
"Please consult the documentation.");
}
/* Store values, retain previous config for rollback in case we fail. */
int old_values[CONFIG_OOM_COUNT];
for (i = 0; i < CONFIG_OOM_COUNT; i++) {
old_values[i] = server.oom_score_adj_values[i];
server.oom_score_adj_values[i] = values[i];
}
/* When parsing the config file, we want to apply only when all is done. */
if (!apply)
return C_OK;
/* Update */
if (setOOMScoreAdj(-1) == C_ERR) {
/* Roll back */
for (i = 0; i < CONFIG_OOM_COUNT; i++)
server.oom_score_adj_values[i] = old_values[i];
if (err)
*err = "Failed to apply oom-score-adj-values configuration, check server logs.";
return C_ERR;
}
return C_OK;
}
void initConfigValues() {
for (standardConfig *config = configs; config->name != NULL; config++) {
config->interface.init(config->data);
}
}
void loadServerConfigFromString(char *config) {
const char *err = NULL;
int linenum = 0, totlines, i;
int slaveof_linenum = 0;
sds *lines;
int save_loaded = 0;
lines = sdssplitlen(config,strlen(config),"\n",1,&totlines);
for (i = 0; i < totlines; i++) {
sds *argv;
int argc;
linenum = i+1;
lines[i] = sdstrim(lines[i]," \t\r\n");
/* Skip comments and blank lines */
if (lines[i][0] == '#' || lines[i][0] == '\0') continue;
/* Split into arguments */
argv = sdssplitargs(lines[i],&argc);
if (argv == NULL) {
err = "Unbalanced quotes in configuration line";
goto loaderr;
}
/* Skip this line if the resulting command vector is empty. */
if (argc == 0) {
sdsfreesplitres(argv,argc);
continue;
}
sdstolower(argv[0]);
/* Iterate the configs that are standard */
int match = 0;
for (standardConfig *config = configs; config->name != NULL; config++) {
if ((!strcasecmp(argv[0],config->name) ||
(config->alias && !strcasecmp(argv[0],config->alias))))
{
if (argc != 2) {
err = "wrong number of arguments";
goto loaderr;
}
if (!config->interface.set(config->data, argv[1], 0, &err)) {
goto loaderr;
}
match = 1;
break;
}
}
if (match) {
sdsfreesplitres(argv,argc);
continue;
}
/* Execute config directives */
if (!strcasecmp(argv[0],"bind") && argc >= 2) {
int j, addresses = argc-1;
if (addresses > CONFIG_BINDADDR_MAX) {
err = "Too many bind addresses specified"; goto loaderr;
}
/* Free old bind addresses */
for (j = 0; j < server.bindaddr_count; j++) {
zfree(server.bindaddr[j]);
}
for (j = 0; j < addresses; j++)
server.bindaddr[j] = zstrdup(argv[j+1]);
server.bindaddr_count = addresses;
} else if (!strcasecmp(argv[0],"unixsocketperm") && argc == 2) {
errno = 0;
server.unixsocketperm = (mode_t)strtol(argv[1], NULL, 8);
if (errno || server.unixsocketperm > 0777) {
err = "Invalid socket file permissions"; goto loaderr;
}
} else if (!strcasecmp(argv[0],"save")) {
/* We don't reset save params before loading, because if they're not part
* of the file the defaults should be used.
*/
if (!save_loaded) {
save_loaded = 1;
resetServerSaveParams();
}
if (argc == 3) {
int seconds = atoi(argv[1]);
int changes = atoi(argv[2]);
if (seconds < 1 || changes < 0) {
err = "Invalid save parameters"; goto loaderr;
}
appendServerSaveParams(seconds,changes);
} else if (argc == 2 && !strcasecmp(argv[1],"")) {
resetServerSaveParams();
}
} else if (!strcasecmp(argv[0],"dir") && argc == 2) {
if (chdir(argv[1]) == -1) {
serverLog(LL_WARNING,"Can't chdir to '%s': %s",
argv[1], strerror(errno));
exit(1);
}
} else if (!strcasecmp(argv[0],"logfile") && argc == 2) {
FILE *logfp;
zfree(server.logfile);
server.logfile = zstrdup(argv[1]);
if (server.logfile[0] != '\0') {
/* Test if we are able to open the file. The server will not
* be able to abort just for this problem later... */
logfp = fopen(server.logfile,"a");
if (logfp == NULL) {
err = sdscatprintf(sdsempty(),
"Can't open the log file: %s", strerror(errno));
goto loaderr;
}
fclose(logfp);
}
} else if (!strcasecmp(argv[0],"include") && argc == 2) {
loadServerConfig(argv[1], 0, NULL);
} else if ((!strcasecmp(argv[0],"slaveof") ||
!strcasecmp(argv[0],"replicaof")) && argc == 3) {
slaveof_linenum = linenum;
sdsfree(server.masterhost);
if (!strcasecmp(argv[1], "no") && !strcasecmp(argv[2], "one")) {
server.masterhost = NULL;
continue;
}
server.masterhost = sdsnew(argv[1]);
char *ptr;
server.masterport = strtol(argv[2], &ptr, 10);
if (server.masterport < 0 || server.masterport > 65535 || *ptr != '\0') {
err = "Invalid master port"; goto loaderr;
}
server.repl_state = REPL_STATE_CONNECT;
} else if (!strcasecmp(argv[0],"list-max-ziplist-entries") && argc == 2){
/* DEAD OPTION */
} else if (!strcasecmp(argv[0],"list-max-ziplist-value") && argc == 2) {
/* DEAD OPTION */
} else if (!strcasecmp(argv[0],"rename-command") && argc == 3) {
struct redisCommand *cmd = lookupCommand(argv[1]);
int retval;
if (!cmd) {
err = "No such command in rename-command";
goto loaderr;
}
/* If the target command name is the empty string we just
* remove it from the command table. */
retval = dictDelete(server.commands, argv[1]);
serverAssert(retval == DICT_OK);
/* Otherwise we re-add the command under a different name. */
if (sdslen(argv[2]) != 0) {
sds copy = sdsdup(argv[2]);
retval = dictAdd(server.commands, copy, cmd);
if (retval != DICT_OK) {
sdsfree(copy);
err = "Target command name already exists"; goto loaderr;
}
}
} else if (!strcasecmp(argv[0],"cluster-config-file") && argc == 2) {
zfree(server.cluster_configfile);
server.cluster_configfile = zstrdup(argv[1]);
} else if (!strcasecmp(argv[0],"client-output-buffer-limit") &&
argc == 5)
{
int class = getClientTypeByName(argv[1]);
unsigned long long hard, soft;
int soft_seconds;
if (class == -1 || class == CLIENT_TYPE_MASTER) {
err = "Unrecognized client limit class: the user specified "
"an invalid one, or 'master' which has no buffer limits.";
goto loaderr;
}
hard = memtoll(argv[2],NULL);
soft = memtoll(argv[3],NULL);
soft_seconds = atoi(argv[4]);
if (soft_seconds < 0) {
err = "Negative number of seconds in soft limit is invalid";
goto loaderr;
}
server.client_obuf_limits[class].hard_limit_bytes = hard;
server.client_obuf_limits[class].soft_limit_bytes = soft;
server.client_obuf_limits[class].soft_limit_seconds = soft_seconds;
} else if (!strcasecmp(argv[0],"oom-score-adj-values") && argc == 1 + CONFIG_OOM_COUNT) {
if (updateOOMScoreAdjValues(&argv[1], &err, 0) == C_ERR) goto loaderr;
} else if (!strcasecmp(argv[0],"notify-keyspace-events") && argc == 2) {
int flags = keyspaceEventsStringToFlags(argv[1]);
if (flags == -1) {
err = "Invalid event class character. Use 'g$lshzxeA'.";
goto loaderr;
}
server.notify_keyspace_events = flags;
} else if (!strcasecmp(argv[0],"user") && argc >= 2) {
int argc_err;
if (ACLAppendUserForLoading(argv,argc,&argc_err) == C_ERR) {
char buf[1024];
const char *errmsg = ACLSetUserStringError();
snprintf(buf,sizeof(buf),"Error in user declaration '%s': %s",
argv[argc_err],errmsg);
err = buf;
goto loaderr;
}
} else if (!strcasecmp(argv[0],"loadmodule") && argc >= 2) {
queueLoadModule(argv[1],&argv[2],argc-2);
} else if (!strcasecmp(argv[0],"sentinel")) {
/* argc == 1 is handled by main() as we need to enter the sentinel
* mode ASAP. */
if (argc != 1) {
if (!server.sentinel_mode) {
err = "sentinel directive while not in sentinel mode";
goto loaderr;
}
queueSentinelConfig(argv+1,argc-1,linenum,lines[i]);
}
} else {
err = "Bad directive or wrong number of arguments"; goto loaderr;
}
sdsfreesplitres(argv,argc);
}
/* Sanity checks. */
if (server.cluster_enabled && server.masterhost) {
linenum = slaveof_linenum;
i = linenum-1;
err = "replicaof directive not allowed in cluster mode";
goto loaderr;
}
/* To ensure backward compatibility and work while hz is out of range */
if (server.config_hz < CONFIG_MIN_HZ) server.config_hz = CONFIG_MIN_HZ;
if (server.config_hz > CONFIG_MAX_HZ) server.config_hz = CONFIG_MAX_HZ;
sdsfreesplitres(lines,totlines);
return;
loaderr:
fprintf(stderr, "\n*** FATAL CONFIG FILE ERROR (Redis %s) ***\n",
REDIS_VERSION);
fprintf(stderr, "Reading the configuration file, at line %d\n", linenum);
fprintf(stderr, ">>> '%s'\n", lines[i]);
fprintf(stderr, "%s\n", err);
exit(1);
}
/* Load the server configuration from the specified filename.
* The function appends the additional configuration directives stored
* in the 'options' string to the config file before loading.
*
* Both filename and options can be NULL, in such a case are considered
* empty. This way loadServerConfig can be used to just load a file or
* just load a string. */
void loadServerConfig(char *filename, char config_from_stdin, char *options) {
sds config = sdsempty();
char buf[CONFIG_MAX_LINE+1];
FILE *fp;
/* Load the file content */
if (filename) {
if ((fp = fopen(filename,"r")) == NULL) {
serverLog(LL_WARNING,
"Fatal error, can't open config file '%s': %s",
filename, strerror(errno));
exit(1);
}
while(fgets(buf,CONFIG_MAX_LINE+1,fp) != NULL)
config = sdscat(config,buf);
fclose(fp);
}
/* Append content from stdin */
if (config_from_stdin) {
serverLog(LL_WARNING,"Reading config from stdin");
fp = stdin;
while(fgets(buf,CONFIG_MAX_LINE+1,fp) != NULL)
config = sdscat(config,buf);
}
/* Append the additional options */
if (options) {
config = sdscat(config,"\n");
config = sdscat(config,options);
}
loadServerConfigFromString(config);
sdsfree(config);
}