概述
kdump 是一种先进的基于 kexec 的内核崩溃转储机制。当系统崩溃时,kdump 使用 kexec 启动到第二个内核。
第二个内核通常叫做捕获内核,以很小内存启动以捕获转储镜像。第一个内核保留了内存的一部分给第二内核启动 用。由于 kdump 利用 kexec 启动捕获内核,绕过了 BIOS,所以第一个内核的内存得以保留。这是内核崩溃转储的本质。
现在整理下在Ubuntu 14.04上的部署方法。
部署
第一步是通过如下指令安装:
root@46:~# sudo apt-get install linux-crashdump
安装过程中,会弹出选择框:
注意:
选择YES。选择完成后,安装过程完毕,该安装会自动修改grub.cfg:
shell
linux /boot/vmlinuz-4.1.49-server root=UUID=cfb17230-a084-4117-a9b8-38bcd48f7c07 ro video=VGA-1:800x600 quiet 915.modeset=0 nomodeset net.ifnames=1 biosdevname=0 nomdmonddf nomdmonisw crashkernel=384M-:128M
后面新增 crashkernel=384M -:128M 了部分。 安装好了之后,执行kdump-config show会发现,该功能尚未启用。
shell
root@46:~# kdump-config show
Usage: /usr/sbin/kdump-config {help|test|show|status|load|unload|savecore} root@46:~# kdump-config show
* /etc/default/kdump-tools: USE_KDUMP is not set or zero
* no crashkernel= parameter in the kernel cmdline
DUMP_MODE: kdump
USE_KDUMP: 0
KDUMP_SYSCTL: kernel.panic_on_oops=1 KDUMP_COREDIR: /var/crash
crashkernel addr:
current state: Not ready to kdump
kexec command:
no kexec command recorded
第二步是要启用kdump,方法是修改/etc/default/kdump-tools 中的USE_KDUMP
shell
# kdump-tools configuration
# ---------------------------------------------------------------------------# USE_KDUMP - controls kdump will be configured
# 0 - kdump kernel will not be loaded
# 1 - kdump kernel will be loaded and kdump is configured
# KDUMP_SYSCTL - controls when a panic occurs, using the sysctl
# interface. The contents of this variable should be the
# "variable=value ..." portion of the 'sysctl -w ' command.
# If not set, the default value "kernel.panic_on_oops=1" will
# be used. Disable this feature by setting KDUMP_SYSCTL=" "
# Example - also panic on oom:
# KDUMP_SYSCTL="kernel.panic_on_oops=1 vm.panic_on_oom=1"
#
USE_KDUMP=0
#KDUMP_SYSCTL="kernel.panic_on_oops=1"
将USE_KDUMP=0改成 USE_KDUMP=1。 修改之后,需要重启机器,方能生效。
第三步重启机器,然后检查 kdump-config show: (换了一台机器展示)
shell
root@44:~# kdump-config show
DUMP_MODE: kdump
USE_KDUMP: 1
KDUMP_SYSCTL: kernel.panic_on_oops=1
KDUMP_COREDIR: /var/crash
crashkernel addr: 0x2d000000
current state: ready to kdump
kexec command:
/sbin/kexec -p --command-line="BOOT_IMAGE=/boot/vmlinuz-4.1.49-server root=UUID=3cc9983b-3d4d-413a-a9a5-6edc9e785c3e ro video=VGA-1:800x600 quiet 915.modeset=0 nomodeset net.ifnames=1 biosdevname=0 nomdmonddf nomdmonisw irqpoll maxcpus=1 nousb" --initrd=/boot/initrd.img-4.1.49-server /boot/vmlinuz-4.1.49-server
测试配置是否有效
如何触发crash,验证能否产生crash文件: 手动触发的话,比较简单:
echo c> /proc/sysrq-trigger
就会触发crash,搜集资料,机器启动之后会看到如下内容:
shell
root@44:/var/crash/201808021451# crash /usr/lib/debug/lib/modules/4.1.49-server/vmlinux dump.201808021451
crash 7.0.3
Copyright (C) 2002-2013 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
Copyright (C) 1999-2006 Hewlett-Packard Co
Copyright (C) 2005, 2006, 2011, 2012 Fujitsu Limited
Copyright (C) 2006, 2007 VA Linux Systems Japan K.K.
Copyright (C) 2005, 2011 NEC Corporation
Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc.
Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc.
This program is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. Enter "help copying" to see the conditions.
This program has absolutely no warranty. Enter "help warranty" for details.
GNU gdb (GDB) 7.6
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu"...
KERNEL: /usr/lib/debug/lib/modules/4.1.49-server/vmlinux
DUMPFILE: dump.201808021451 [PARTIAL DUMP]
CPUS: 32
DATE: Thu Jan 1 08:00:00 1970
UPTIME: 00:01:35
LOAD AVERAGE: 5.72, 2.41, 0.89
TASKS: 2109
NODENAME: 44
RELEASE: 4.1.49-server
VERSION: #2 SMP Wed Aug 1 14:31:39 CST 2018
MACHINE: x86_64 (2099 Mhz)
MEMORY: 127.9 GB
PANIC: "Oops: 0002 [#1] SMP " (check log for details)
PID: 5191
COMMAND: "bash"
TASK: ffff8810249be500 [THREAD_INFO: ffff880fd8144000]
CPU: 1
STATE: TASK_RUNNING (PANIC)
crash> bt
PID: 5191 TASK: ffff8810249be500 CPU: 1 COMMAND: "bash"
#0 [ffff880fd8147ab0] machine_kexec at ffffffff81042cef
#1 [ffff880fd8147b00] crash_kexec at ffffffff810e7a33
#2 [ffff880fd8147bd0] oops_end at ffffffff810076c8
#3 [ffff880fd8147c00] no_context at ffffffff8173cf5f
#4 [ffff880fd8147c60] __bad_area_nosemaphore at ffffffff8173d01e
#5 [ffff880fd8147cb0] bad_area_nosemaphore at ffffffff8173d18a
#6 [ffff880fd8147cc0] __do_page_fault at ffffffff8104ce25
#7 [ffff880fd8147d30] do_page_fault at ffffffff8104d331
#8 [ffff880fd8147d60] page_fault at ffffffff8174aa62
[exception RIP: sysrq_handle_crash+22]
RIP: ffffffff8145e156 RSP: ffff880fd8147e18 RFLAGS: 00010292
RAX: 000000000000000f RBX: ffffffff81caa660 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff88103fa4d678 RDI: 0000000000000063
RBP: ffff880fd8147e18 R8: 00000000000000c2 R9: ffffffff81eafe9c
R10: 000000000000064a R11: 0000000000000649 R12: 0000000000000063
R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#9 [ffff880fd8147e20] __handle_sysrq at ffffffff8145e927
#10 [ffff880fd8147e50] write_sysrq_trigger at ffffffff8145edd3
#11 [ffff880fd8147e70] proc_reg_write at ffffffff8123107d
#12 [ffff880fd8147ea0] __vfs_write at ffffffff811ca688
#13 [ffff880fd8147eb0] vfs_write at ffffffff811cacd9
#14 [ffff880fd8147f00] sys_write at ffffffff811cbaa6
#15 [ffff880fd8147f50] system_call_fastpath at ffffffff81748f5b
RIP: 00007f9b22df2390 RSP: 00007fff9441ffd8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f9b22df2390
RDX: 0000000000000002 RSI: 0000000001d27408 RDI: 0000000000000001
RBP: 000000000000000a R8: 000000000000000a R9: 00007f9b2370c740
R10: 00007f9b230c46a0 R11: 0000000000000246 R12: 00000000004b8a97
R13: 0000000000000073 R14: 0000000000000030 R15: 0000000001efdb40
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
crash>
凑巧的时,我们产品恰好发生了crash:
当搜集信息完成之后,会自动重启,重启之后,可以在/var/crash下看到对应的信息:
shell
root@44:~# ll /var/crash
total 56
drwxrwxrwt 4 root root 4096 Aug 2 15:53 ./
drwxr-xr-x 16 root root 4096 Aug 2 14:43 ../
drwxr-xr-x 2 root root 4096 Aug 2 14:54 201808021451/
drwxr-xr-x 2 root root 4096 Aug 2 15:56 201808021553/
-rw-r--r-- 1 root root 313 Aug 2 15:58 kexec_cmd
-rw-r----- 1 root root 36332 Aug 2 14:56 linux-image-4.1.49-server-201808021451.crash
root@44:/var/crash/201808021553# ll
total 1434560
drwxr-xr-x 2 root root 4096 Aug 2 15:56 ./
drwxrwxrwt 4 root root 4096 Aug 2 15:53 ../
-rw------- 1 root root 240194 Aug 2 15:56 dmesg.201808021553
-rw------- 1 root root 1468733533 Aug 2 15:56 dump.201808021553
分析crash
要分析crash文件,需要安装内核符号表:
shell
root@44:~# dpkg -l |grep linux-image
ii linux-image-4.1.49-server 201808011426~cf7c219 amd64 Linux kernel binary image for version 4.1.49-server
ii linux-image-4.1.49-server-dbg 201808011426~cf7c219 amd64 Linux kernel debug image for version 4.1.49-server
安装后,使用如下指令开始分析crash
shell
crash /usr/lib/debug/lib/modules/4.1.49-server/vmlinux dump.201808021553
对于本次的crash,可以查出是由于scst引起的,如下所示:
shell
root@44:/var/crash/201808021553# crash /usr/lib/debug/lib/modules/4.1.49-server/vmlinux dump.201808021553
crash 7.0.3
Copyright (C) 2002-2013 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
Copyright (C) 1999-2006 Hewlett-Packard Co
Copyright (C) 2005, 2006, 2011, 2012 Fujitsu Limited
Copyright (C) 2006, 2007 VA Linux Systems Japan K.K.
Copyright (C) 2005, 2011 NEC Corporation
Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc.
Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc.
This program is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. Enter "help copying" to see the conditions.
This program has absolutely no warranty. Enter "help warranty" for details.
GNU gdb (GDB) 7.6
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu"...
KERNEL: /usr/lib/debug/lib/modules/4.1.49-server/vmlinux
DUMPFILE: dump.201808021553 [PARTIAL DUMP]
CPUS: 32
DATE: Thu Jan 1 08:00:00 1970
UPTIME: 00:55:56
LOAD AVERAGE: 23.89, 6.95, 4.06
TASKS: 2485
NODENAME: 44
RELEASE: 4.1.49-server
VERSION: #2 SMP Wed Aug 1 14:31:39 CST 2018
MACHINE: x86_64 (2099 Mhz)
MEMORY: 127.9 GB
PANIC: "Oops: 0000 [#1] SMP " (check log for details)
PID: 133396
COMMAND: "scstd30"
TASK: ffff882036574bc0 [THREAD_INFO: ffff881c1253c000]
CPU: 14
STATE: TASK_RUNNING (PANIC)
crash>
crash> bt
PID: 133396 TASK: ffff882036574bc0 CPU: 14 COMMAND: "scstd30"
#0 [ffff881c1253f970] machine_kexec at ffffffff81042cef
#1 [ffff881c1253f9c0] crash_kexec at ffffffff810e7a33
#2 [ffff881c1253fa90] oops_end at ffffffff810076c8
#3 [ffff881c1253fac0] no_context at ffffffff8173cf5f
#4 [ffff881c1253fb20] __bad_area_nosemaphore at ffffffff8173d01e
#5 [ffff881c1253fb70] bad_area_nosemaphore at ffffffff8173d18a
#6 [ffff881c1253fb80] __do_page_fault at ffffffff8104ce25
#7 [ffff881c1253fbf0] do_page_fault at ffffffff8104d331
#8 [ffff881c1253fc20] page_fault at ffffffff8174aa62
[exception RIP: scst_update_lat_stats+224]
RIP: ffffffffa0c2d4f0 RSP: ffff881c1253fcd8 RFLAGS: 00010206
RAX: 0000000000000048 RBX: ffff881cf3ed0000 RCX: 0000000000000010
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff881c1253fd58 R8: 0000000000000000 R9: 0000000000000092
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff881db84e7640 R14: ffff881cf3ed0490 R15: 0000000000000092
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#9 [ffff881c1253fd60] scst_finish_cmd at ffffffffa0c0bc68 [scst]
#10 [ffff881c1253fdb0] scst_process_active_cmd at ffffffffa0c0e415 [scst] #11 [ffff881c1253fdf0] scst_do_job_active at ffffffffa0c0fe10 [scst]
#12 [ffff881c1253fe40] scst_cmd_thread at ffffffffa0c100cf [scst]
#13 [ffff881c1253fec0] kthread at ffffffff8107c749
#14 [ffff881c1253ff50] ret_from_fork at ffffffff81749362
crash>
通过反编译 scst.ko文件:
objdump -S scst.ko |tee /tmp/scst.ko.obj
我们打开该反编译的文件:
shell
0000000000034410 <scst_update_lat_stats>:
void scst_update_lat_stats(struct scst_cmd *cmd)
{
34410: e8 00 00 00 00 callq 34415 <scst_update_lat_stats+0x5>
34415: 55 push %rbp
34416: 48 89 e5 mov %rsp,%rbp
34419: 41 57 push %r15
3441b: 41 56 push %r14
3441d: 41 55 push %r13
3441f: 49 89 fd mov %rdi,%r13
34422: 41 54 push %r12
34424: 53 push %rbx
34425: 48 83 ec 58 sub $0x58,%rsp
uint64_t finish, scst_time, tgt_time, dev_time, total_time;
struct scst_session *sess = cmd->sess;
注意这一行:
[exception RIP: scst_update_lat_stats+224]
我们可以计算crash的代码位置:
0x0000000000034410 + 224(十进制) = 344F0
去反编译的文件中寻找对应的未知:
shell
#ifdef CONFIG_SCST_MEASURE_LATENCY
if (cmd->dev->vdev_update_lat_stats) {
344f0: 4c 8b 97 40 02 00 00 mov 0x240(%rdi),%r10
else
dev_latency_stat = NULL;
原因是:cmd->dev在更新统计新的时候已经变成了NULL,这和之前的分析对应。
shell
10925 #ifdef CONFIG_SCST_MEASURE_LATENCY
10926 if (cmd->dev->vdev_update_lat_stats) {
10927 cmd->dev->vdev_update_lat_stats(cmd->dev, cmd->data_direction, 10928 total_time);
10929 }
10930 #endif
来源: Transcendent
文章作者: Gavin Wang
文章链接: Ubuntu kdump dump core files | Transcendent
本文章著作权归作者所有,任何形式的转载都请注明出处。