Matlab/Simulink-Lookup table的使用

一、1-D Lookup Table

1、平坦插值

用二分法判断输入信号的左右,查表输出y右或y左

2、线性插值

用二分法循环判断输入信号的左右。

例:输入[1 2 3 4],输出[4 5 6 7]

如输入为2.5:

1)判断出左是2,右是3,计算左右区间内的线性插值时输入的因子,因子k=(2.5-2)/(3-2)=0.5。

2)计算查表输出,y=(y右-y左)*k+y左=(6-5)*0.5+5=5.5

 2-D Lookup Table

 1、线性插值

二分法循环判断第1个输入信号的左右,算出因子k1

二分法循环判断第2个输入信号的左右,算出因子k2

计算查表输出

 

  • 0
    点赞
  • 7
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
Direct Torque Control (DTC) Algorithm: MATLAB Simulink, C2000 Series Microcontroller Direct Torque Control (DTC) is a popular control algorithm used in modern AC motor drives. It is used to control the torque and speed of an AC motor by directly controlling the stator voltage and current. The algorithm is known for its fast response time and high accuracy. In this article, we will discuss the implementation of the DTC algorithm using MATLAB Simulink and the C2000 series microcontroller. We will begin by discussing the basics of the DTC algorithm and then move on to the implementation details. Basics of Direct Torque Control (DTC) The DTC algorithm is based on the concept of stator flux estimation. The stator flux is estimated by measuring the stator voltages and currents. Once the stator flux is estimated, the torque and speed of the motor can be controlled by directly controlling the stator voltage and current. The DTC algorithm consists of two main loops: the torque loop and the flux loop. The torque loop is responsible for controlling the torque of the motor, while the flux loop is responsible for controlling the flux of the motor. The two loops work together to achieve the desired torque and speed of the motor. Implementation of DTC Algorithm using MATLAB Simulink The DTC algorithm can be implemented using MATLAB Simulink. The Simulink model consists of two main blocks: the stator flux estimator and the DTC controller. The stator flux estimator block is responsible for estimating the stator flux, while the DTC controller block is responsible for controlling the torque and speed of the motor. The stator flux estimator block consists of a Clarke and Park transform block, a PI controller block, and an inverse Clarke and Park transform block. The Clarke and Park transform block converts the three-phase stator voltages and currents into a two-phase stationary reference frame. The PI controller block calculates the stator flux estimate by comparing the estimated flux with the actual flux. The inverse Clarke and Park transform block converts the stator flux estimate back into the three-phase reference frame. The DTC controller block consists of a torque loop and a flux loop. The torque loop is responsible for controlling the torque of the motor, while the flux loop is responsible for controlling the flux of the motor. The torque loop consists of a PI controller block and a lookup table block. The PI controller block calculates the torque reference by comparing the estimated torque with the actual torque. The lookup table block is used to calculate the voltage reference based on the torque reference and the flux reference. Implementation of DTC Algorithm using C2000 Series Microcontroller The DTC algorithm can also be implemented using the C2000 series microcontroller. The C2000 series microcontroller is a popular choice for implementing motor control algorithms due to its high processing power and real-time capabilities. The implementation of the DTC algorithm using the C2000 series microcontroller involves the following steps: 1. Configure the ADC channels to measure the stator voltages and currents. 2. Implement the Clarke and Park transform using the DSP library functions. 3. Implement the PI controllers using the DSP library functions. 4. Implement the lookup table using the DSP library functions. 5. Configure the PWM channels to generate the PWM signals for the motor. 6. Implement the control algorithm using the interrupt service routine. Conclusion The DTC algorithm is a popular control algorithm used in modern AC motor drives. It is known for its fast response time and high accuracy. The algorithm can be implemented using MATLAB Simulink and the C2000 series microcontroller. The implementation details of the algorithm were discussed in this article.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值