调用Ping 命令及返回值,跨平台

 

C语言:

system("ping 127.0.0.1>1.txt");

system("ping IP Address");

 

OS X 可视化ping

一种方法是在terminal 窗口,直接运行 ping 和 traceroute 命令,如下所示【ctrl+c 停止】:

ping www.entlib.com

traceroute www.entlib.net

另外一种方法是 – Mac OS X 中的网络实用工具(Network Utility),有ping 和 Traceroute 命令窗口:

 

ping源码

 

/* PING.C 
/* 
/* ping source code distribute by cpu || digger. 
/* for unix family only. compil and link success in sco unix. 
/* i think linux no problem too. u can try it. 
/* before read this code, you shoud know about the principle of 
/* tcp/ip, especially icmp protocol, u also should also know some 
/* about BSD socket API, and unix system signal programming. 
/* 
/* cc -o ping ping.c -lsocket, then u will get executable file, 
/* but must act as root when cc it, and then set euid attribute 
/* for this ping, then u can execute it as common user. 
/* because only root can have authority to creat raw socket. 
/* 
/* i love socket, if so do u, 
/* call me, cpu == digger 

# include 
# include 
# include 
# include 
# include 
# include 
# include 
# include 
# include 
# include 

# define ICMP_ECHO 8 /* icmp echo requir */ 
# define ICMP_ECHOREPLY 0 /* icmp echo reply */ 
# define ICMP_HEADSIZE 8 /* icmp packet header size */ 
# define IP_HEADSIZE 20 /* ip packet header size */ 

typedef struct tagIpHead /* icmp packet header */ 

u_char ip_verlen; /* ip version and ip header lenth*/ 
u_char ip_tos; /* ip type of service */ 
u_short ip_len; /* ip packet lenghth */ 
u_short ip_id; /* ip packet identification */ 
u_short ip_fragoff; /* ip packet fragment and offset */ 
u_char ip_ttl; /* ip packet time to live */ 
u_char ip_proto; /* ip packet protocol type */ 
u_short ip_chksum; /* ip packet header checksum */ 
u_long ip_src_addr; /* ip source ip adress */ 
u_long ip_dst_addr; /* ip destination ip adress */ 
} IPHEAD; 

typedef struct tagIcmpHead /* icmp header */ 

u_char icmp_type; /* icmp service type */ 
/* 8 echo require, 0 echo reply */ 
u_char icmp_code; /* icmp header code */ 
u_short icmp_chksum; /* icmp header chksum */ 
u_short icmp_id; /* icmp packet identification */ 
u_short icmp_seq; /* icmp packet sequent */ 
u_char icmp_data[1]; /* icmp data, use as pointer */ 
} ICMPHEAD; 

u_short ChkSum( u_short * pIcmpData, int iDataLen ) 
/* for check sum of icmp header */ 

u_short iSum; 
u_short iOddByte; 

iSum = 0; 

while ( iDataLen > 1 ) { /* xor the next unsigned int data */ 
iSum ^= *pIcmpData++; 
iDataLen -= 2; 


if ( iDataLen == 1 ) { /* the rest odd byte */ 
iOddByte = 0; 
*((u_char *)&iOddByte) = *(u_char *)pIcmpData; 
iSum ^= iOddByte; 


iSum ^= 0xffff; /* xor 0xffff == not it */ 
return(iSum); 


long time_now() /* return time passed by */ 
/* since 1970.1.1 00:00:00, */ 
/* in 1/1000000 second */ 

struct timeval now; 
long lPassed; 
gettimeofday(&now, 0); 
lPassed = now.tv_sec * 1000000 + now.tv_usec; 
/* now.tv_sec in second */ 
/* now.tv_usec in 1/1000000 second */ 
return lPassed; 


char* host; /* destination host */ 
char* prog; /* program name */ 
extern errno; /* system global parameter */ 
long lSendTime; /* each time when send, change it */ 
u_short seq; /* the icmp packet seqence */ 
int iTimeOut; /* time out parameter */ 
int sock, sent, recvd, max, min, total; 
/* sent : icmp packet already sent */ 
/* recvd: proper icmp packet received */ 
/* max, min: max min round trip time */ 
/* total: total round trip time */ 
/* store to calculate average */ 
u_long lHostIp; /* host ip adress */ 
struct sockaddr_in it; /* destination host information */ 

int ping(); 
void stat(); 

main(int argc, char** argv) 

struct hostent* h; 
char buf[200]; 
char dst_host[32]; 
int i, namelen; 
IPHEAD* pIpHead; 
ICMPHEAD* pIcmpHead; 

if (argc < 2) { /* ping the destination host */ 
/* every timeout second */ 
/* default timeout is 1 second */ 

printf("usage: %s [-timeout] host|IP\n", argv[0]); 
exit(0); 

prog = argv[0]; 
host = argc == 2 ? argv[1] : argv[2]; 
iTimeOut = argc == 2 ? 1 : atoi(argv[1]); 

/* creat the raw socket for icmp */ 

if ((sock = socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)) < 0) { 
perror("socket"); 
exit(2); 


/* set destination host information */ 

bzero(&it, sizeof(it)); 
it.sin_family = AF_INET; 

/* check host format */ 

if ( ( lHostIp = inet_addr(host) ) != INADDR_NONE ) { 
/* is available ip adress */ 
it.sin_addr.s_addr = lHostIp; 
strcpy( dst_host, host ); 
} else if ( h = gethostbyname(host) ) { 
/* is available host name */ 
/* from hosts file of local host */ 
/* or from DNS */ 
bcopy(h->h_addr, &it.sin_addr, h->h_length); 
sprintf( dst_host, "%s (%s)", host, 
inet_ntoa(it.sin_addr) ); 
} else { 
/* bad ip adress or host name */ 
/* exit */ 
fprintf( stderr, "bad IP or host\n" ); 
exit(3); 

namelen = sizeof(it); 

printf("\nDigger pinging %s, send %d bytes\n", 
dst_host, 
IP_HEADSIZE + ICMP_HEADSIZE + sizeof(long) 
); 

seq = 0; /* first icmp_seq = 0 */ 
sigset(SIGINT, stat); /* when press del or ctrl+c, call stat */ 
/* to statistic the result , and then exit */ 
sigset(SIGALRM, ping); /* hook ping function to timer */ 
alarm(iTimeOut); /* start timer, call ping every timeout */ 
/* seconds */ 
ping(); 
for ( ;; ) { /* waiting for every echo back */ 
/* icmp packet and check it */ 
register size; 
register u_char ttl; 
register delta; 
register iIpHeadLen; 

/* block to received echo back datagram */ 

size = recvfrom(sock, buf, sizeof(buf), 0, 
(struct sockaddr *)&it, &namelen); 
if (size == -1 && errno == EINTR) { 
/* receive error or system call */ 
/* interrupted */ 
continue; 


/* calculate the round trip time, */ 
/* time when receive minus time when send */ 

delta = (int)((time_now() - lSendTime)/1000); 

/* get echo back packet and check its ip header */ 

pIpHead = (IPHEAD *)buf; 

/* get the ip packet lenth */ 
/* if too small, not the icmp echoreply packet */ 
/* give it up */ 

iIpHeadLen = (int)((pIpHead->ip_verlen & 0x0f) << 2); 
if (size < iIpHeadLen + ICMP_HEADSIZE) { 
continue; 

ttl = pIpHead->ip_ttl; /* time to live param */ 

/* get the icmp header information */ 
pIcmpHead = (ICMPHEAD *)(buf + iIpHeadLen); 

/* not icmp echo reply packet, give it up */ 
if (pIcmpHead->icmp_type != ICMP_ECHOREPLY) { 
continue; 


/* not proper icmp sequent number, give it up */ 
if (pIcmpHead->icmp_id != seq || pIcmpHead->icmp_seq != seq) { 
continue; 


/* print out result for each icmp */ 
/* echo reply information */ 
sprintf( buf, "icmp_seq=%u bytes=%d ttl=%d", 
pIcmpHead->icmp_seq, size, ttl ); 
fprintf(stderr, "reply from %s: %s time=%d ms\n", 
host, buf, delta); 

/* calculate some statistic information */ 
/* max, min, average round trip time */ 
/* received icmp echo reply packet numbers */ 
max = MAX(delta, max); 
min = min ? MIN(delta, min) : delta; 
total += delta; 
++ recvd; 

/* for next icmp sequence */ 

++ seq; 



ping() 

char buf[200]; 
int iPacketSize; 

/* make the icmp header information */ 

ICMPHEAD *pIcmpHead = (ICMPHEAD *)buf; 
pIcmpHead->icmp_type = ICMP_ECHO; 
pIcmpHead->icmp_code = 0; 
pIcmpHead->icmp_id = seq; 
pIcmpHead->icmp_seq = seq; 
pIcmpHead->icmp_chksum = 0; 

/* store time information as icmp packet content, 4 bytes */ 
/* u may store other information instead */ 

*((long *)pIcmpHead->icmp_data) = time_now(); 

iPacketSize = ICMP_HEADSIZE + 4; /* icmp packet length */ 

/* icmp header check sum */ 

pIcmpHead->icmp_chksum = ChkSum((u_short *)pIcmpHead, 
iPacketSize ); 

/* remember the time when send for calculate round trip time */ 
lSendTime = time_now(); 

/* send the icmp packet to des host */ 
if ( sendto(sock, buf, iPacketSize, 0, (struct sockaddr *)&it, 
sizeof(it) ) < 0) { 
perror("send failed"); 
exit(6); 


/* packet number been sent */ 
++sent; 

/* reset the timer hooker to me again */ 
alarm(iTimeOut); 


void stat() /* print the statistic information for this time's ping */ 

if (sent) { 
printf("\n----- %s ping statistics summerized by Digger-----\n" 
, host ); 
printf("%d packets sent, %d packets received, %.2f%% lost\n", 
sent, recvd, (float)(sent-recvd)/(float)sent*100 ); 

if (recvd) { 
printf("round_trip min/avg/max: %d/%d/%d ms\n\n", 
min, total/recvd, max ); 

exit(0); 

VB 在网页中调用PING 命令

具体做法如下:

  首先, 建一个.BAT文件(例如:myPing.BAT:),这个文件要在ASP中调用,文件代码如下:

  ping -a %1 > d:\INetPub\cgi-bin\%2.txt

(%1)是将来要ping的地址, (%2)是存储ping结果的文件. 以下是ASP的代码:

< %

Set FileSys = Server.CreateObject("Scripting.FileSystemObject")

FileName = FileSys.GetTempName

Set WShShell = Server.CreateObject("WScript.Shell")

IP = "xxx.xxx.xxx.xxx" ’你要ping的地址

RetCode = WShShell.Run("d:\Inetpub\cgi-bin\myPing.bat " & IP & " " & FileName, 1, True)

if RetCode = 0 Then

’没有错误

else

Response.Redirect "PingErrors.htm"

end if

Set TextFile = FileSys.OpenTextFile("d:\InetPub\cgi-bin\" & FileName & ".txt", 1)

TextBuffer = TextFile.ReadAll

For i = 1 to Len(TextBuffer)

If Mid(TextBuffer,i,1) = chr(13) Then

Response.Write("
")

else

Response.Write(Mid(TextBuffer,i,1))

end if

Next

TextFile.Close

FileSys.DeleteFile "d:\Inetpub\cgi-bin\" & FileName & ".txt"

% >

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值