skyeye模拟器使用—模拟s3c2410的uboot启动

最新推荐文章于 2023-11-02 11:59:34 发布

雷古拉斯

最新推荐文章于 2023-11-02 11:59:34 发布

阅读量4k

点赞数

分类专栏： bootloader学习

本文链接：https://blog.csdn.net/tankai19880619/article/details/14127475

版权

bootloader学习专栏收录该内容

9 篇文章 0 订阅

订阅专栏

一、硬件配置

1.s3c2410.conf

# skyeye config file for S3C2410X
arch:arm
cpu: arm920t
mach: s3c2410x

# physical memory
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00100000
mem_bank: map=M, type=RW, addr=0x30000000, size=0x04000000

# all peripherals I/O mapping area
mem_bank: map=I, type=RW, addr=0x48000000, size=0x20000000
mem_bank: map=I, type=RW, addr=0x19000300, size=0x00000020

uart:mod=term
dbct:state=on

2.s3c2440.conf

#skyeye config file sample

cpu:  arm920t
mach: s3c2440

#physical memory
#mem_bank: map=M, type=RW, addr=0x20000000, size=0x01000000
mem_bank: map=M, type=RW, addr=0x30000000, size=0x00800000
mem_bank: map=M, type=RW, addr=0x30800000, size=0x00800000, file=./initrd.img
mem_bank: map=M, type=RW, addr=0x31000000, size=0x01000000

#all peripherals I/O mapping area
#mem_bank: map=I, type=RW, addr=0xfefa0000, size=0x00060000
mem_bank: map=I, type=RW, addr=0x48000000, size=0x20000000
mem_bank: map=I, type=RW, addr=0x19000300, size=0x00000020

#net: type=cs8900a, base=0x19000300, size=0x20,int=9, mac=0:4:3:2:1:f, ethmod=tuntap, hostip=10.0.0.1

lcd:type=s3c2440,mod=gtk

load_addr:base=0x30000000, mask=0xFFFFFF

#dbct:state=on

二、uboot下载编译

1.uboot下载

ftp://ftp.denx.de/pub/u-boot/

2.交叉编译工具链下载

http://ishare.iask.sina.com.cn/f/13836544.html

解压上述交叉编译工具

3.配置环境变量

gedit ~/.bashrc添加如下：

export PATH+=:/home/lianxi/skyeye/opt/FriendlyARM/toolschain/4.4.3/bin/

立即生效：

source ~/.bashrc

2.编译uboot

make distclean
make smdk2410_config
make all

三、运行

cp u-boot-2011.12/u-boot ./uboot
skyeye -e uboot -c s3c2410.conf

报错：

DRAM:  64 MiB
WARNING: Caches not enabled
Flash: *** failed ***
### ERROR ### Please RESET the board ###

修改：gedit drivers/mtd/cfi_flash.c

unsigned long flash_init (void)
{
  unsigned long size = 0;
  int i;

为

unsigned long flash_init (void)
{
  unsigned long size = 1<<20;
  int i;

重新编译uboot后运行：

skyeye -e uboot -c s3c2410.conf

结果：

Your elf file is little endian.
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2 
mach info: name s3c2410x, mach_init addr 0x423450
uart_mod:0, desc_in:, desc_out:, converter:
dbct info: turn on dbct!
SKYEYE: use arm920t mmu ops
exec file "uboot"'s format is elf32-little.
load section .text: addr = 0x00000000  size = 0x00057634.
load section .rodata: addr = 0x00057634  size = 0x0001176e.
load section .hash: addr = 0x00068da4  size = 0x00000040.
load section .ARM.exidx: addr = 0x00068de4  size = 0x00000020.
load section .data: addr = 0x00068e04  size = 0x00001fd4.
load section .got.plt: addr = 0x0006add8  size = 0x0000000c.
load section .u_boot_cmd: addr = 0x0006ade4  size = 0x000007c8.
load section .dynsym: addr = 0x00073584  size = 0x000000b0.
load section .rel.dyn: addr = 0x0006b5ac  size = 0x00007fd8.
not load section .bss: addr = 0x0006b5ac  size = 0x00042f98 .
not load section .ARM.attributes: addr = 0x00000000  size = 0x00000026 .
not load section .comment: addr = 0x00000000  size = 0x00000018 .
not load section .debug_line: addr = 0x00000000  size = 0x00019fda .
not load section .debug_info: addr = 0x00000000  size = 0x000a9517 .
not load section .debug_abbrev: addr = 0x00000000  size = 0x00016eee .
not load section .debug_aranges: addr = 0x00000000  size = 0x00001420 .
not load section .debug_pubnames: addr = 0x00000000  size = 0x00005fcb .
not load section .debug_frame: addr = 0x00000000  size = 0x0000b458 .
not load section .debug_str: addr = 0x00000000  size = 0x00011822 .
not load section .debug_loc: addr = 0x00000000  size = 0x0003e4bf .
not load section .debug_ranges: addr = 0x00000000  size = 0x000083c0 .
call ARMul_InitSymTable,kernel filename is uboot. 
ERROR: s3c2410x_io_write_word(0x4c000000) = 0x00ffffff
ERROR: s3c2410x_io_write_word(0x4c000008) = 0x00048032


U-Boot 2011.12 (Nov 04 2013 - 16:42:46)

DRAM:  64 MiB
WARNING: Caches not enabled
Flash: 1 MiB
NAND:  ERROR: s3c2410x_io_write_word(0x4e000000) = 0x00008377
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
ERROR: s3c2410x_io_write_word(0x4e000004) = 0x000000ff
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
raise: Signal # 8 caught
raise: Signal # 8 caught
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
ERROR: s3c2410x_io_write_word(0x4e000004) = 0x00000090
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
ERROR: s3c2410x_io_write_word(0x4e000008) = 0x00000000
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
raise: Signal # 8 caught
raise: Signal # 8 caught
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
ERROR: s3c2410x_io_write_word(0x4e000004) = 0x00000090
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
ERROR: s3c2410x_io_write_word(0x4e000008) = 0x00000000
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xfffff7ff
raise: Signal # 8 caught
raise: Signal # 8 caught
No NAND device found!!!
ERROR: s3c2410x_io_write_word(0x4e000000) = 0xffffffff
0 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ERROR: s3c2410x_io_write_word(0x1900030a) = 0x00000000
CS8900-0
Warning: failed to set MAC address

SMDK2410 #