OSPF大作业

要求:

1.R4为ISP，其上只能配置IP地址
  R4与其他所有直连设备间均使用共有IP
2.R3-R5/6/7为MGRE环境，R3位中心站点
3.整个OSPF环境IP基于172.16.0.0/16划分
4.所有设备均可以访问R4的环回
5.减少LSA的更新数量，加快收敛，保障更新安全
6.全网可达

实验过程：

1.对总网段进行划分，如图所示

2.配置IP和环回

3.对R3、R5、R6、R7设备进行MGRE环境的配置，R3为中心站点，并在这四个路由器上而配置到ISP的缺省路由，实现对边界路由器的私网互通。

4.各个公网和私网进行ospf宣告

5.对需要做特殊区域的区域做特殊区域的配置

6.对边界路由器配置NAT协议从而实现可以对公网的访问

详细过程:

配置ip

AR1
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip a 172.16.33.1 29
[r1-GigabitEthernet0/0/0]int lo0
[r1-LoopBack0]ip a 172.16.34.1 24

AR2

[r2]int g 0/0/0
[r2-GigabitEthernet0/0/0]ip a 172.16.33.2 29
[r2-GigabitEthernet0/0/0]int lo0
[r2-LoopBack0]ip a 172.16.35.1 24

AR3

[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip a 172.16.33.3 29
[r3-GigabitEthernet0/0/0]int lo0
[r3-LoopBack0]ip a 172.16.36.1 24

AR6

[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip a 172.16.65.1 29

AR7

[r7]int g 0/0/1
[r7-GigabitEthernet0/0/1]ip a 172.16.97.1 29

AR8

[r8]int g0/0/0
[r8-GigabitEthernet0/0/0]ip a 172.16.97.2 29
[r8-GigabitEthernet0/0/0]int lo0
[r8-LoopBack0]ip a 172.16.98.1 24
[r8-LoopBack0]int g 0/0/1
[r8-GigabitEthernet0/0/1]ip a 172.16.97.9 29

AR9

[r9]int g0/0/0
[r9-GigabitEthernet0/0/0]ip a 172.16.97.10 29
[r9-GigabitEthernet0/0/0]int g0/0/1
[r9-GigabitEthernet0/0/1]ip a 172.16.129.1 29
[r9-GigabitEthernet0/0/1]int lo0
[r9-LoopBack0]ip a 172.16.130.1 24

AR10

[r10]int g0/0/0
[r10-GigabitEthernet0/0/0]ip a 172.16.129.2 29
[r10-GigabitEthernet0/0/0]int lo0
[r10-LoopBack0]ip a 172.16.131.1 24

AR11

[r11]int g 0/0/0
[r11-GigabitEthernet0/0/0]ip a 172.16.65.2 29
[r11-GigabitEthernet0/0/0]int lo0
[r11-LoopBack0]ip a 172.16.66.1 24
[r11-GigabitEthernet0/0/1]ip a 172.16.65.9 29

AR12

[r12]int g0/0/0
[r12-GigabitEthernet0/0/0]ip a 172.16.65.10 29
[r12]int lo0
[r12-LoopBack0]ip a 172.16.160.1 20
[r12-LoopBack0]int lo1
[r12-LoopBack1]ip a 172.16.176.1 20

area0区域配置ip并配置缺省

AR3
[r3]int s 4/0/0
[r3-Serial4/0/0]ip a 34.0.0.1 24
[r3]ip route-static 0.0.0.0 0 34.0.0.2

AR4

[isp]int s 4/0/0
[isp-Serial4/0/0]ip a 34.0.0.2 24
[isp-Serial4/0/0]int s 3/0/0
[isp-Serial3/0/0]ip a 46.0.0.2 24
[isp-Serial3/0/0]int s 4/0/1
[isp-Serial4/0/1]ip a 45.0.0.2 24
[isp-Serial4/0/1]int g0/0/0
[isp-GigabitEthernet0/0/0]ip a 47.0.0.2 24
[isp-GigabitEthernet0/0/0]int lo0
[isp-LoopBack0]ip a 4.4.4.4 24

AR5

[r5]int s 4/0/0
[r5-Serial4/0/0]ip a 45.0.0.1 24
[r5-Serial4/0/0]int lo0
[r5-LoopBack0]ip a 172.16.2.1 24
[r5]ip route-static 0.0.0.0 0 45.0.0.2

AR6

[r6]int s 4/0/0
[r6-Serial4/0/0]ip a 46.0.0.1 24
[r6-Serial4/0/0]int lo0
[r6-LoopBack0]ip a 172.16.3.1 24
[r6]ip route-static 0.0.0.0 0 46.0.0.2

AR7

[r7]int g0/0/0
[r7-GigabitEthernet0/0/0]ip a 47.0.0.1 24
[r7-GigabitEthernet0/0/0]int lo0
[r7-LoopBack0]ip a 172.16.4.1 24
[r7]ip route-static 0.0.0.0 0 47.0.0.2

对R3、R5、R6、R7配置MGRE环境，R3为中心站点。

AR3

[r3]int t 0/0/0
[r3-Tunnel0/0/0]ip a 172.16.1.1 29
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp
[r3-Tunnel0/0/0]source 34.0.0.1
[r3-Tunnel0/0/0]nhrp network-id 100
[r3-Tunnel0/0/0]nhrp entry multicast dynamic

AR5

[r5]int t0/0/0
[r5-Tunnel0/0/0]ip a 172.16.1.2 29
[r5-Tunnel0/0/0]tunnel-protocol gre p2mp
[r5-Tunnel0/0/0]source Serial 4/0/0
[r5-Tunnel0/0/0]nhrp network-id 100
[r5-Tunnel0/0/0]nhrp entry 172.16.1.1 34.0.0.1 register

AR6

[r6]int t0/0/0
[r6-Tunnel0/0/0]ip a 172.16.1.3 29
[r6-Tunnel0/0/0]tunnel-protocol gre p2mp
[r6-Tunnel0/0/0]source Serial 4/0/0
[r6-Tunnel0/0/0]nhrp network-id 100
[r6-Tunnel0/0/0]nhrp entry 172.16.1.1 34.0.0.1 register

AR7

[r7]int t0/0/0
[r7-Tunnel0/0/0]ip a 172.16.1.4 29
[r7-Tunnel0/0/0]tunnel-protocol gre p2mp
[r7-Tunnel0/0/0]source GigabitEthernet 0/0/0
[r7-Tunnel0/0/0]nhrp network-id 100
[r7-Tunnel0/0/0]nhrp entry 172.16.1.1 34.0.0.1 register4

AR1
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip a 172.16.33.1 29
[r1-GigabitEthernet0/0/0]int lo0
[r1-LoopBack0]ip a 172.16.34.1 24

AR2

[r2]int g 0/0/0
[r2-GigabitEthernet0/0/0]ip a 172.16.33.2 29
[r2-GigabitEthernet0/0/0]int lo0
[r2-LoopBack0]ip a 172.16.35.1 24

AR3

[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip a 172.16.33.3 29
[r3-GigabitEthernet0/0/0]int lo0
[r3-LoopBack0]ip a 172.16.36.1 24

AR6

[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip a 172.16.65.1 29

AR7

[r7]int g 0/0/1
[r7-GigabitEthernet0/0/1]ip a 172.16.97.1 29

AR8

[r8]int g0/0/0
[r8-GigabitEthernet0/0/0]ip a 172.16.97.2 29
[r8-GigabitEthernet0/0/0]int lo0
[r8-LoopBack0]ip a 172.16.98.1 24
[r8-LoopBack0]int g 0/0/1
[r8-GigabitEthernet0/0/1]ip a 172.16.97.9 29

AR9

[r9]int g0/0/0
[r9-GigabitEthernet0/0/0]ip a 172.16.97.10 29
[r9-GigabitEthernet0/0/0]int g0/0/1
[r9-GigabitEthernet0/0/1]ip a 172.16.129.1 29
[r9-GigabitEthernet0/0/1]int lo0
[r9-LoopBack0]ip a 172.16.130.1 24

AR10

[r10]int g0/0/0
[r10-GigabitEthernet0/0/0]ip a 172.16.129.2 29
[r10-GigabitEthernet0/0/0]int lo0
[r10-LoopBack0]ip a 172.16.131.1 24

AR11

[r11]int g 0/0/0
[r11-GigabitEthernet0/0/0]ip a 172.16.65.2 29
[r11-GigabitEthernet0/0/0]int lo0
[r11-LoopBack0]ip a 172.16.66.1 24
[r11-GigabitEthernet0/0/1]ip a 172.16.65.9 29

AR12

[r12]int g0/0/0
[r12-GigabitEthernet0/0/0]ip a 172.16.65.10 29
[r12]int lo0
[r12-LoopBack0]ip a 172.16.160.1 20
[r12-LoopBack0]int lo1
[r12-LoopBack1]ip a 172.16.176.1 20

启动每台设备的OSPF协议

AR1
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]a 1
[r1-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.255.255

AR2

[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]a 1
[r2-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.255.255

AR3

[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]a 1
[r3-ospf-1-area-0.0.0.1]network 172.16.32.0 0.0.7.255

[r3-ospf-1-area-0.0.0.1]a 0
[r3-ospf-1-area-0.0.0.0]net
[r3-ospf-1-area-0.0.0.0]network 172.16.1.1 0.0.0.0

AR5

[r5]ospf 1 rout
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]a 0
[r5-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255

AR6

[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]a 0
[r6-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.3.255
[r6-ospf-1-area-0.0.0.0]a 2
[r6-ospf-1-area-0.0.0.2]network 172.16.65.1 0.0.0.0

AR7

[r7]ospf 1 router-id 7.7.7.7
[r7-ospf-1]a 0
[r7-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.7.255
[r7-ospf-1-area-0.0.0.0]a 3
[r7-ospf-1-area-0.0.0.3]network 172.16.97.1 0.0.0.0

AR8

[r8]ospf 1 router-id 8.8.8.8
[r8-ospf-1]a 3
[r8-ospf-1-area-0.0.0.3]network 172.16.0.0 0.0.255.255

AR9

[r9]ospf 1 router-id 9.9.9.9
[r9-ospf-1]a 3
[r9-ospf-1-area-0.0.0.3]network 172.16.97.10 0.0.0.0
[r9-ospf-1-area-0.0.0.3]a 4
[r9-ospf-1-area-0.0.0.4]network 172.16.128.0 0.0.3.255

AR10

[r10]ospf 1 router-id 10.10.10.10
[r10-ospf-1]a 4
[r10-ospf-1-area-0.0.0.4]network 172.16.0.0 0.0.255.255

AR11

[r11]ospf 1 router-id 11.11.11.11
[r11-ospf-1]a 2
[r11-ospf-1-area-0.0.0.2]network 172.16.0.0 0.0.255.255

AR12

[r12]ospf 1 router-id 12.12.12.12
[r12-ospf-1]a 2
[r12-ospf-1-area-0.0.0.2]network 172.16.65.10 0.0.0.0
[r12]rip 1
[r12-rip-1]v 2
[r12-rip-1]network 172.16.0.0

更改tunnel接口的接口类型

AR3

[r3]int t0/0/0
[r3-Tunnel0/0/0]ospf network-type p2mp

AR5

[r5]int t0/0/0
[r5-Tunnel0/0/0]ospf network-type p2mp

AR6

[r6]int t0/0/0
[r6-Tunnel0/0/0]ospf network-type p2mp

AR7

[r7]int t0/0/0
[r7-Tunnel0/0/0]ospf network-type p2mp

在R12进行重发布，从而可以让运行OSPF的设备学习到域外路由AR12

[r12]ospf 1
[r12-ospf-1]import-route rip 1

将AREA4更改为域外路由来减少路由信息将AREA4改为域外路由，以此来做特殊区域来减少路由条目的数量因此在R9上重新开启一个OSPF进程，进行重发布。（不用虚链路和Tunnel隧道技术是因为要做特殊区域，因此这里要用双向重发布，但是在此拓扑当中只需要单项重发布，然后在写一条缺省路由即可。）

AR9

[r9]ospf 1
[r9-ospf-1]a 4
[r9-ospf-1-area-0.0.0.4]undo network 172.16.128.0 0.0.3.255
[r9-ospf-1-area-0.0.0.4]q
[r9-ospf-1]undo a 4
[r9-ospf-1]q
[r9]ospf 2 rout
[r9]ospf 2 router-id 9.9.9.9
[r9-ospf-2]a 4
[r9-ospf-2-area-0.0.0.4]net
[r9-ospf-2-area-0.0.0.4]network 172.16.128.0 0.0.3.255
[r9]ospf 1
[r9-ospf-1]import-route ospf 2
[r9]ospf 2
[r9-ospf-2]de
[r9-ospf-2]default-route-advertise

    在ABR的设备上做域间路由汇总以及ASBR的设备上做域外路由汇总

AR3

[r3]ospf 1
[r3-ospf-1]a 1
[r3-ospf-1-area-0.0.0.1]abr-summary 172.16.32.0 255.255.224.0

AR6

[r6]ospf 1
[r6-ospf-1]a 2
[r6-ospf-1-area-0.0.0.2]abr-summary 172.16.64.0 255.255.224.0

AR7

[r7]ospf 1
[r7-ospf-1]a 3
[r7-ospf-1-area-0.0.0.3]abr-summary 172.16.96.0 255.255.224.0

AR12

[r12]ospf 1
[r12-ospf-1]asbr-summary 172.16.160.0 255.255.224.0

AR9

[r9]ospf 1
[r9-ospf-1]asbr-summary 172.16.128.0 255.255.224.0

      将AREA1、AREA2、AREA3做成特殊区域，来实现路由条目的减少

AR1

[r1]ospf 1
[r1-ospf-1]a 1
[r1-ospf-1-area-0.0.0.1]stub

AR2

[r1]ospf 1
[r1-ospf-1]a 1
[r1-ospf-1-area-0.0.0.1]stub

AR3

[r3]ospf 1
[r3-ospf-1]a 1
[r3-ospf-1-area-0.0.0.1]stub no-summary

AR6

[r6]ospf 1
[r6-ospf-1]a 2
[r6-ospf-1-area-0.0.0.2]nssa no-summary

AR11

r11]ospf 1
[r11-ospf-1]a 2
[r11-ospf-1-area-0.0.0.2]nssa

AR12

[r12]ospf 1
[r12-ospf-1]a 2
[r12-ospf-1-area-0.0.0.2]nssa

AR7

[r7]ospf 1
[r7-ospf-1]a 3
[r7-ospf-1-area-0.0.0.3]nssa no-summary

AR8

[r8]ospf 1
[r8-ospf-1]a 3
[r8-ospf-1-area-0.0.0.3]nssa

AR9

[r9]ospf 1
[r9-ospf-1]a 3
[r9-ospf-1-area-0.0.0.3]nssa

     对ABR及ASBR做过子网汇总的路由器做空接口来进行防环
 

AR3

[r3]ip route-static 172.16.32.0 19 NULL 0

AR6

[r6]ip route-static 172.16.64.0 19 NULL 0

AR7

[r7]ip route-static 172.16.96.0 19 NULL 0

AR12

[r12]ip route-static 172.16.160.0 19 NULL 0

AR9

[r9]ip route-static 172.16.128.0 19 NULL 0

  能够进行访问到公网。进行NAT协议的配置

AR3

[r3]acl 2000
[r3-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r3]int s 4/0/0
[r3-Serial4/0/0]nat outbound 2000

AR5

[r5]acl 2000
[r5-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r5]int s4/0/0
[r5-Serial4/0/0]nat outbound 2000

AR6

[r6]acl 2000
[r6-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r6]int s 4/0/0
[r6-Serial4/0/0]nat outbound 2000

AR7

[r7]acl 2000
[r7-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r7]int g0/0/0
[r7-GigabitEthernet0/0/0]nat outbound 2000

  对AREA1进行区域认证的配置，保证更新安全

AR1

[r1]ospf 1
[r1-ospf-1]a 1
[r1-ospf-1-area-0.0.0.1]authentication-mode md5 1 cipher 123456

AR2

[r1]ospf 1
[r1-ospf-1]a 1
[r1-ospf-1-area-0.0.0.1]authentication-mode md5 1 cipher 123456

AR3

[r3]ospf 1
[r3-ospf-1]a 1
[r3-ospf-1-area-0.0.0.1]authentication-mode md5 1 cipher 123456

  加快收敛
 

AR3

[r3]int t0/0/0
[r3-Tunnel0/0/0]ospf timer hello 10

AR5

[r5]int t0/0/0
[r5-Tunnel0/0/0]ospf timer hello 10

AR6

[r6]int t0/0/0
[r6-Tunnel0/0/0]ospf timer hello 10

AR7

[r7]int t0/0/0
[r7-Tunnel0/0/0]ospf timer hello 10