NAT实验-动态（Cisco Equipments）

李拜天84

已于 2023-03-30 14:49:12 修改

阅读量137

点赞数

文章标签：运维网络安全网络协议网络

于 2023-03-29 16:56:00 首次发布

本文链接：https://blog.csdn.net/tianwei2125/article/details/129840353

版权

CE配置：
int g0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
no shut
int s0/3/0
ip address 222.0.1.1 255.255.255.0
ip nat outside
no shut
access-list 1 permit 192.168.1.0 0.0.0.255 ##用ACL去match待转换网段
ip nat pool dalian 222.0.1.10 222.0.1.100 netmask 255.255.255.0 ##nat pool
ip nat inside source list 1 pool dalian ##把ACL和nat pool 关联
ip route 222.0.2.0 255.255.255.0 222.0.1.2

PE配置：
int g0/0
ip address 222.0.2.1 255.255.255.0
no shut
interface Serial0/3/0
ip address 222.0.1.2 255.255.255.0
no shut
ip route 192.168.1.0 255.255.255.0 222.0.1.1

实验结果：
PC1和PC2上ping PE：
PE>
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.10
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.10
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.10
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.10
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.11
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.11
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.11
ICMP: echo reply sent, src 222.0.1.2, dst 222.0.1.11