1.system/media/audio/include/system/audio.h
#ifndef ANDROID_AUDIO_CORE_H
#define ANDROID_AUDIO_CORE_H
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <sys/cdefs.h>
#include <sys/types.h>
#include <cutils/bitops.h>
__BEGIN_DECLS
/* The enums were moved here mostly from
* frameworks/base/include/media/AudioSystem.h
*/
/* device address used to refer to the standard remote submix */
#define AUDIO_REMOTE_SUBMIX_DEVICE_ADDRESS "0"
/* AudioFlinger and AudioPolicy services use I/O handles to identify audio sources and sinks */
typedef int audio_io_handle_t;
#define AUDIO_IO_HANDLE_NONE 0
/* Audio stream types */
typedef enum {
/* These values must kept in sync with
* frameworks/base/media/java/android/media/AudioSystem.java
*/
AUDIO_STREAM_DEFAULT = -1,
AUDIO_STREAM_MIN = 0,
AUDIO_STREAM_VOICE_CALL = 0,
AUDIO_STREAM_SYSTEM = 1,
AUDIO_STREAM_RING = 2,
AUDIO_STREAM_MUSIC = 3,
AUDIO_STREAM_ALARM = 4,
AUDIO_STREAM_NOTIFICATION = 5,
AUDIO_STREAM_BLUETOOTH_SCO = 6,
AUDIO_STREAM_ENFORCED_AUDIBLE = 7, /* Sounds that cannot be muted by user
* and must be routed to speaker
*/
AUDIO_STREAM_DTMF = 8,
AUDIO_STREAM_TTS = 9, /* Transmitted Through Speaker.
* Plays over speaker only, silent on other devices.
*/
AUDIO_STREAM_ACCESSIBILITY = 10, /* For accessibility talk back prompts */
AUDIO_STREAM_REROUTING = 11, /* For dynamic policy output mixes */
AUDIO_STREAM_PATCH = 12, /* For internal audio flinger tracks. Fixed volume */
AUDIO_STREAM_PUBLIC_CNT = AUDIO_STREAM_TTS + 1,
AUDIO_STREAM_CNT = AUDIO_STREAM_PATCH + 1,
} audio_stream_type_t;
/* Do not change these values without updating their counterparts
* in frameworks/base/media/java/android/media/AudioAttributes.java
*/
typedef enum {
AUDIO_CONTENT_TYPE_UNKNOWN = 0,
AUDIO_CONTENT_TYPE_SPEECH = 1,
AUDIO_CONTENT_TYPE_MUSIC = 2,
AUDIO_CONTENT_TYPE_MOVIE = 3,
AUDIO_CONTENT_TYPE_SONIFICATION = 4,
AUDIO_CONTENT_TYPE_CNT,
AUDIO_CONTENT_TYPE_MAX = AUDIO_CONTENT_TYPE_CNT - 1,
} audio_content_type_t;
/* Do not change these values without updating their counterparts
* in frameworks/base/media/java/android/media/AudioAttributes.java
*/
typedef enum {
AUDIO_USAGE_UNKNOWN = 0,
AUDIO_USAGE_MEDIA = 1,
AUDIO_USAGE_VOICE_COMMUNICATION = 2,
AUDIO_USAGE_VOICE_COMMUNICATION_SIGNALLING = 3,
AUDIO_USAGE_ALARM = 4,
AUDIO_USAGE_NOTIFICATION = 5,
AUDIO_USAGE_NOTIFICATION_TELEPHONY_RINGTONE = 6,
AUDIO_USAGE_NOTIFICATION_COMMUNICATION_REQUEST = 7,
AUDIO_USAGE_NOTIFICATION_COMMUNICATION_INSTANT = 8,
AUDIO_USAGE_NOTIFICATION_COMMUNICATION_DELAYED = 9,
AUDIO_USAGE_NOTIFICATION_EVENT = 10,
AUDIO_USAGE_ASSISTANCE_ACCESSIBILITY = 11,
AUDIO_USAGE_ASSISTANCE_NAVIGATION_GUIDANCE = 12,
AUDIO_USAGE_ASSISTANCE_SONIFICATION = 13,
AUDIO_USAGE_GAME = 14,
AUDIO_USAGE_VIRTUAL_SOURCE = 15,
AUDIO_USAGE_CNT,
AUDIO_USAGE_MAX = AUDIO_USAGE_CNT - 1,
} audio_usage_t;
typedef uint32_t audio_flags_mask_t;
/* Do not change these values without updating their counterparts
* in frameworks/base/media/java/android/media/AudioAttributes.java
*/
enum {
AUDIO_FLAG_AUDIBILITY_ENFORCED = 0x1,
AUDIO_FLAG_SECURE = 0x2,
AUDIO_FLAG_SCO = 0x4,
AUDIO_FLAG_BEACON = 0x8,
AUDIO_FLAG_HW_AV_SYNC = 0x10,
AUDIO_FLAG_HW_HOTWORD = 0x20,
AUDIO_FLAG_BYPASS_INTERRUPTION_POLICY = 0x40,
AUDIO_FLAG_BYPASS_MUTE = 0x80,
};
/* Do not change these values without updating their counterparts
* in frameworks/base/media/java/android/media/MediaRecorder.java,
* frameworks/av/services/audiopolicy/AudioPolicyService.cpp,
* and system/media/audio_effects/include/audio_effects/audio_effects_conf.h!
*/
typedef enum {
AUDIO_SOURCE_DEFAULT = 0,
AUDIO_SOURCE_MIC = 1,
AUDIO_SOURCE_VOICE_UPLINK = 2,
AUDIO_SOURCE_VOICE_DOWNLINK = 3,
AUDIO_SOURCE_VOICE_CALL = 4,
AUDIO_SOURCE_CAMCORDER = 5,
AUDIO_SOURCE_VOICE_RECOGNITION = 6,
AUDIO_SOURCE_VOICE_COMMUNICATION = 7,
AUDIO_SOURCE_REMOTE_SUBMIX = 8, /* Source for the mix to be presented remotely. */
/* An example of remote presentation is Wifi Display */
/* where a dongle attached to a TV can be used to */
/* play the mix captured by this audio source. */
AUDIO_SOURCE_CNT,
AUDIO_SOURCE_MAX = AUDIO_SOURCE_CNT - 1,
AUDIO_SOURCE_FM_TUNER = 1998,
AUDIO_SOURCE_HOTWORD = 1999, /* A low-priority, preemptible audio source for
for background software hotword detection.
Same tuning as AUDIO_SOURCE_VOICE_RECOGNITION.
Used only internally to the framework. Not exposed
at the audio HAL. */
} audio_source_t;
/* Audio attributes */
#define AUDIO_ATTRIBUTES_TAGS_MAX_SIZE 256
typedef struct {
audio_content_type_t content_type;
audio_usage_t usage;
audio_source_t source;
audio_flags_mask_t flags;
char tags[AUDIO_ATTRIBUTES_TAGS_MAX_SIZE]; /* UTF8 */
} audio_attributes_t;
/* special audio session values
* (XXX: should this be living in the audio effects land?)
*/
typedef enum {
/* session for effects attached to a particular output stream
* (value must be less than 0)
*/
AUDIO_SESSION_OUTPUT_STAGE = -1,
/* session for effects applied to output mix. These effects can
* be moved by audio policy manager to another output stream
* (value must be 0)
*/
AUDIO_SESSION_OUTPUT_MIX = 0,
/* application does not specify an explicit session ID to be used,
* and requests a new session ID to be allocated
* TODO use unique values for AUDIO_SESSION_OUTPUT_MIX and AUDIO_SESSION_ALLOCATE,
* after all uses have been updated from 0 to the appropriate symbol, and have been tested.
*/
AUDIO_SESSION_ALLOCATE = 0,
} audio_session_t;
/* a unique ID allocated by AudioFlinger for use as a audio_io_handle_t or audio_session_t */
typedef int audio_unique_id_t;
#define AUDIO_UNIQUE_ID_ALLOCATE AUDIO_SESSION_ALLOCATE
/* Audio sub formats (see enum audio_format). */
/* PCM sub formats */
typedef enum {
/* All of these are in native byte order */
AUDIO_FORMAT_PCM_SUB_16_BIT = 0x1, /* DO NOT CHANGE - PCM signed 16 bits */
AUDIO_FORMAT_PCM_SUB_8_BIT = 0x2, /* DO NOT CHANGE - PCM unsigned 8 bits */
AUDIO_FORMAT_PCM_SUB_32_BIT = 0x3, /* PCM signed .31 fixed point */
AUDIO_FORMAT_PCM_SUB_8_24_BIT = 0x4, /* PCM signed 8.23 fixed point */
AUDIO_FORMAT_PCM_SUB_FLOAT = 0x5, /* PCM single-precision floating point */
AUDIO_FORMAT_PCM_SUB_24_BIT_PACKED = 0x6, /* PCM signed .23 fixed point packed in 3 bytes */
} audio_format_pcm_sub_fmt_t;
/* The audio_format_*_sub_fmt_t declarations are not currently used */
/* MP3 sub format field definition : can use 11 LSBs in the same way as MP3
* frame header to specify bit rate, stereo mode, version...
*/
typedef enum {
AUDIO_FORMAT_MP3_SUB_NONE = 0x0,
} audio_format_mp3_sub_fmt_t;
/* AMR NB/WB sub format field definition: specify frame block interleaving,
* bandwidth efficient or octet aligned, encoding mode for recording...
*/
typedef enum {
AUDIO_FORMAT_AMR_SUB_NONE = 0x0,
} audio_format_amr_sub_fmt_t;
/* AAC sub format field definition: specify profile or bitrate for recording... */
typedef enum {
AUDIO_FORMAT_AAC_SUB_MAIN = 0x1,
AUDIO_FORMAT_AAC_SUB_LC = 0x2,
AUDIO_FORMAT_AAC_SUB_SSR = 0x4,
AUDIO_FORMAT_AAC_SUB_LTP = 0x8,
AUDIO_FORMAT_AAC_SUB_HE_V1 = 0x10,
AUDIO_FORMAT_AAC_SUB_SCALABLE = 0x20,
AUDIO_FORMAT_AAC_SUB_ERLC = 0x40,
AUDIO_FORMAT_AAC_SUB_LD = 0x80,
AUDIO_FORMAT_AAC_SUB_HE_V2 = 0x100,
AUDIO_FORMAT_AAC_SUB_ELD = 0x200,
} audio_format_aac_sub_fmt_t;
/* VORBIS sub format field definition: specify quality for recording... */
typedef enum {
AUDIO_FORMAT_VORBIS_SUB_NONE = 0x0,
} audio_format_vorbis_sub_fmt_t;
/* Audio format consists of a main format field (upper 8 bits) and a sub format
* field (lower 24 bits).
*
* The main format indicates the main codec type. The sub format field
* indicates options and parameters for each format. The sub format is mainly
* used for record to indicate for instance the requested bitrate or profile.
* It can also be used for certain formats to give informations not present in
* the encoded audio stream (e.g. octet alignement for AMR).
*/
typedef enum {
AUDIO_FORMAT_INVALID = 0xFFFFFFFFUL,
AUDIO_FORMAT_DEFAULT = 0,
AUDIO_FORMAT_PCM = 0x00000000UL, /* DO NOT CHANGE */
AUDIO_FORMAT_MP3 = 0x01000000UL,
AUDIO_FORMAT_AMR_NB = 0x02000000UL,
AUDIO_FORMAT_AMR_WB = 0x03000000UL,
AUDIO_FORMAT_AAC = 0x04000000UL,
AUDIO_FORMAT_HE_AAC_V1 = 0x05000000UL, /* Deprecated, Use AUDIO_FORMAT_AAC_HE_V1*/
AUDIO_FORMAT_HE_AAC_V2 = 0x06000000UL, /* Deprecated, Use AUDIO_FORMAT_AAC_HE_V2*/
AUDIO_FORMAT_VORBIS = 0x07000000UL,
AUDIO_FORMAT_OPUS = 0x08000000UL,
AUDIO_FORMAT_AC3 = 0x09000000UL,
AUDIO_FORMAT_E_AC3 = 0x0A000000UL,
AUDIO_FORMAT_DTS = 0x0B000000UL,
AUDIO_FORMAT_DTS_HD = 0x0C000000UL,
AUDIO_FORMAT_MAIN_MASK = 0xFF000000UL,
AUDIO_FORMAT_SUB_MASK = 0x00FFFFFFUL,
/* Aliases */
/* note != AudioFormat.ENCODING_PCM_16BIT */
AUDIO_FORMAT_PCM_16_BIT = (AUDIO_FORMAT_PCM |
AUDIO_FORMAT_PCM_SUB_16_BIT),
/* note != AudioFormat.ENCODING_PCM_8BIT */
AUDIO_FORMAT_PCM_8_BIT = (AUDIO_FORMAT_PCM |
AUDIO_FORMAT_PCM_SUB_8_BIT),
AUDIO_FORMAT_PCM_32_BIT = (AUDIO_FORMAT_PCM |
AUDIO_FORMAT_PCM_SUB_32_BIT),
AUDIO_FORMAT_PCM_8_24_BIT = (AUDIO_FORMAT_PCM |
AUDIO_FORMAT_PCM_SUB_8_24_BIT),
AUDIO_FORMAT_PCM_FLOAT = (AUDIO_FORMAT_PCM |
AUDIO_FORMAT_PCM_SUB_FLOAT),
AUDIO_FORMAT_PCM_24_BIT_PACKED = (AUDIO_FORMAT_PCM |
AUDIO_FORMAT_PCM_SUB_24_BIT_PACKED),
AUDIO_FORMAT_AAC_MAIN = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_MAIN),
AUDIO_FORMAT_AAC_LC = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_LC),
AUDIO_FORMAT_AAC_SSR = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_SSR),
AUDIO_FORMAT_AAC_LTP = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_LTP),
AUDIO_FORMAT_AAC_HE_V1 = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_HE_V1),
AUDIO_FORMAT_AAC_SCALABLE = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_SCALABLE),
AUDIO_FORMAT_AAC_ERLC = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_ERLC),
AUDIO_FORMAT_AAC_LD = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_LD),
AUDIO_FORMAT_AAC_HE_V2 = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_HE_V2),
AUDIO_FORMAT_AAC_ELD = (AUDIO_FORMAT_AAC |
AUDIO_FORMAT_AAC_SUB_ELD),
} audio_format_t;
/* For the channel mask for position assignment representation */
enum {
/* These can be a complete audio_channel_mask_t. */
AUDIO_CHANNEL_NONE = 0x0,
AUDIO_CHANNEL_INVALID = 0xC0000000,
/* These can be the bits portion of an audio_channel_mask_t
* with representation AUDIO_CHANNEL_REPRESENTATION_POSITION.
* Using these bits as a complete audio_channel_mask_t is deprecated.
*/
/* output channels */
AUDIO_CHANNEL_OUT_FRONT_LEFT = 0x1,
AUDIO_CHANNEL_OUT_FRONT_RIGHT = 0x2,
AUDIO_CHANNEL_OUT_FRONT_CENTER = 0x4,
AUDIO_CHANNEL_OUT_LOW_FREQUENCY = 0x8,
AUDIO_CHANNEL_OUT_BACK_LEFT = 0x10,
AUDIO_CHANNEL_OUT_BACK_RIGHT = 0x20,
AUDIO_CHANNEL_OUT_FRONT_LEFT_OF_CENTER = 0x40,
AUDIO_CHANNEL_OUT_FRONT_RIGHT_OF_CENTER = 0x80,
AUDIO_CHANNEL_OUT_BACK_CENTER = 0x100,
AUDIO_CHANNEL_OUT_SIDE_LEFT = 0x200,
AUDIO_CHANNEL_OUT_SIDE_RIGHT = 0x400,
AUDIO_CHANNEL_OUT_TOP_CENTER = 0x800,
AUDIO_CHANNEL_OUT_TOP_FRONT_LEFT = 0x1000,
AUDIO_CHANNEL_OUT_TOP_FRONT_CENTER = 0x2000,
AUDIO_CHANNEL_OUT_TOP_FRONT_RIGHT = 0x4000,
AUDIO_CHANNEL_OUT_TOP_BACK_LEFT = 0x8000,
AUDIO_CHANNEL_OUT_TOP_BACK_CENTER = 0x10000,
AUDIO_CHANNEL_OUT_TOP_BACK_RIGHT = 0x20000,
/* TODO: should these be considered complete channel masks, or only bits? */
AUDIO_CHANNEL_OUT_MONO = AUDIO_CHANNEL_OUT_FRONT_LEFT,
AUDIO_CHANNEL_OUT_STEREO = (AUDIO_CHANNEL_OUT_FRONT_LEFT |
AUDIO_CHANNEL_OUT_FRONT_RIGHT),
AUDIO_CHANNEL_OUT_QUAD = (AUDIO_CHANNEL_OUT_FRONT_LEFT |
AUDIO_CHANNEL_OUT_FRONT_RIGHT |
AUDIO_CHANNEL_OUT_BACK_LEFT |
AUDIO_CHANNEL_OUT_BACK_RIGHT),
AUDIO_CHANNEL_OUT_QUAD_BACK = AUDIO_CHANNEL_OUT_QUAD,
/* like AUDIO_CHANNEL_OUT_QUAD_BACK with *_SIDE_* instead of *_BACK_* */
AUDIO_CHANNEL_OUT_QUAD_SIDE = (AUDIO_CHANNEL_OUT_FRONT_LEFT |
AUDIO_CHANNEL_OUT_FRONT_RIGHT |
AUDIO_CHANNEL_OUT_SIDE_LEFT |
AUDIO_CHANNEL_OUT_SIDE_RIGHT),
AUDIO_CHANNEL_OUT_5POINT1 = (AUDIO_CHANNEL_OUT_FRONT_LEFT |
AUDIO_CHANNEL_OUT_FRONT_RIGHT |
AUDIO_CHANNEL_OUT_FRONT_CENTER |
AUDIO_CHANNEL_OUT_LOW_FREQUENCY |
AUDIO_CHANNEL_OUT_BACK_LEFT |
AUDIO_CHANNEL_OUT_BACK_RIGHT),
AUDIO_CHANNEL_OUT_5POINT1_BACK = AUDIO_CHANNEL_OUT_5POINT1,
/* like AUDIO_CHANNEL_OUT_5POINT1_BACK with *_SIDE_* instead of *_BACK_* */
AUDIO_CHANNEL_OUT_5POINT1_SIDE = (AUDIO_CHANNEL_OUT_FRONT_LEFT |
AUDIO_CHANNEL_OUT_FRONT_RIGHT |
AUDIO_CHANNEL_OUT_FRONT_CENTER |
AUDIO_CHANNEL_OUT_LOW_FREQUENCY |
AUDIO_CHANNEL_OUT_SIDE_LEFT |
AUDIO_CHANNEL_OUT_SIDE_RIGHT),
// matches the correct AudioFormat.CHANNEL_OUT_7POINT1_SURROUND definition for 7.1
AUDIO_CHANNEL_OUT_7POINT1 = (AUDIO_CHANNEL_OUT_FRONT_LEFT |
AUDIO_CHANNEL_OUT_FRONT_RIGHT |
AUDIO_CHANNEL_OUT_FRONT_CENTER |
AUDIO_CHANNEL_OUT_LOW_FREQUENCY |
AUDIO_CHANNEL_OUT_BACK_LEFT |
AUDIO_CHANNEL_OUT_BACK_RIGHT |
AUDIO_CHANNEL_OUT_SIDE_LEFT |
AUDIO_CHANNEL_OUT_SIDE_RIGHT),
AUDIO_CHANNEL_OUT_ALL = (AUDIO_CHANNEL_OUT_FRONT_LEFT |
AUDIO_CHANNEL_OUT_FRONT_RIGHT |
AUDIO_CHANNEL_OUT_FRONT_CENTER |
AUDIO_CHANNEL_OUT_LOW_FREQUENCY |
AUDIO_CHANNEL_OUT_BACK_LEFT |
AUDIO_CHANNEL_OUT_BACK_RIGHT |
AUDIO_CHANNEL_OUT_FRONT_LEFT_OF_CENTER |
AUDIO_CHANNEL_OUT_FRONT_RIGHT_OF_CENTER |
AUDIO_CHANNEL_OUT_BACK_CENTER|
AUDIO_CHANNEL_OUT_SIDE_LEFT|
AUDIO_CHANNEL_OUT_SIDE_RIGHT|
AUDIO_CHANNEL_OUT_TOP_CENTER|
AUDIO_CHANNEL_OUT_TOP_FRONT_LEFT|
AUDIO_CHANNEL_OUT_TOP_FRONT_CENTER|
AUDIO_CHANNEL_OUT_TOP_FRONT_RIGHT|
AUDIO_CHANNEL_OUT_TOP_BACK_LEFT|
AUDIO_CHANNEL_OUT_TOP_BACK_CENTER|
AUDIO_CHANNEL_OUT_TOP_BACK_RIGHT),
/* These are bits only, not complete values */
/* input channels */
AUDIO_CHANNEL_IN_LEFT = 0x4,
AUDIO_CHANNEL_IN_RIGHT = 0x8,
AUDIO_CHANNEL_IN_FRONT = 0x10,
AUDIO_CHANNEL_IN_BACK = 0x20,
AUDIO_CHANNEL_IN_LEFT_PROCESSED = 0x40,
AUDIO_CHANNEL_IN_RIGHT_PROCESSED = 0x80,
AUDIO_CHANNEL_IN_FRONT_PROCESSED = 0x100,
AUDIO_CHANNEL_IN_BACK_PROCESSED = 0x200,
AUDIO_CHANNEL_IN_PRESSURE = 0x400,
AUDIO_CHANNEL_IN_X_AXIS = 0x800,
AUDIO_CHANNEL_IN_Y_AXIS = 0x1000,
AUDIO_CHANNEL_IN_Z_AXIS = 0x2000,
AUDIO_CHANNEL_IN_VOICE_UPLINK = 0x4000,
AUDIO_CHANNEL_IN_VOICE_DNLINK = 0x8000,
/* TODO: should these be considered complete channel masks, or only bits, or deprecated? */
AUDIO_CHANNEL_IN_MONO = AUDIO_CHANNEL_IN_FRONT,
AUDIO_CHANNEL_IN_STEREO = (AUDIO_CHANNEL_IN_LEFT | AUDIO_CHANNEL_IN_RIGHT),
AUDIO_CHANNEL_IN_FRONT_BACK = (AUDIO_CHANNEL_IN_FRONT | AUDIO_CHANNEL_IN_BACK),
AUDIO_CHANNEL_IN_ALL = (AUDIO_CHANNEL_IN_LEFT |
AUDIO_CHANNEL_IN_RIGHT |
AUDIO_CHANNEL_IN_FRONT |
AUDIO_CHANNEL_IN_BACK|
AUDIO_CHANNEL_IN_LEFT_PROCESSED |
AUDIO_CHANNEL_IN_RIGHT_PROCESSED |
AUDIO_CHANNEL_IN_FRONT_PROCESSED |
AUDIO_CHANNEL_IN_BACK_PROCESSED|
AUDIO_CHANNEL_IN_PRESSURE |
AUDIO_CHANNEL_IN_X_AXIS |
AUDIO_CHANNEL_IN_Y_AXIS |
AUDIO_CHANNEL_IN_Z_AXIS |
AUDIO_CHANNEL_IN_VOICE_UPLINK |
AUDIO_CHANNEL_IN_VOICE_DNLINK),
};
/* A channel mask per se only defines the presence or absence of a channel, not the order.
* But see AUDIO_INTERLEAVE_* below for the platform convention of order.
*
* audio_channel_mask_t is an opaque type and its internal layout should not
* be assumed as it may change in the future.
* Instead, always use the functions declared in this header to examine.
*
* These are the current representations:
*
* AUDIO_CHANNEL_REPRESENTATION_POSITION
* is a channel mask representation for position assignment.
* Each low-order bit corresponds to the spatial position of a transducer (output),
* or interpretation of channel (input).
* The user of a channel mask needs to know the context of whether it is for output or input.
* The constants AUDIO_CHANNEL_OUT_* or AUDIO_CHANNEL_IN_* apply to the bits portion.
* It is not permitted for no bits to be set.
*
* AUDIO_CHANNEL_REPRESENTATION_INDEX
* is a channel mask representation for index assignment.
* Each low-order bit corresponds to a selected channel.
* There is no platform interpretation of the various bits.
* There is no concept of output or input.
* It is not permitted for no bits to be set.
*
* All other representations are reserved for future use.
*
* Warning: current representation distinguishes between input and output, but this will not the be
* case in future revisions of the platform. Wherever there is an ambiguity between input and output
* that is currently resolved by checking the channel mask, the implementer should look for ways to
* fix it with additional information outside of the mask.
*/
typedef uint32_t audio_channel_mask_t;
/* Maximum number of channels for all representations */
#define AUDIO_CHANNEL_COUNT_MAX 30
/* log(2) of maximum number of representations, not part of public API */
#define AUDIO_CHANNEL_REPRESENTATION_LOG2 2
/* Representations */
typedef enum {
AUDIO_CHANNEL_REPRESENTATION_POSITION = 0, // must be zero for compatibility
// 1 is reserved for future use
AUDIO_CHANNEL_REPRESENTATION_INDEX = 2,
// 3 is reserved for future use
} audio_channel_representation_t;
/* The channel index masks defined here are the canonical masks for 1 to 8 channel
* endpoints and apply to both source and sink.
*/
enum {
AUDIO_CHANNEL_INDEX_HDR = AUDIO_CHANNEL_REPRESENTATION_INDEX << AUDIO_CHANNEL_COUNT_MAX,
AUDIO_CHANNEL_INDEX_MASK_1 = AUDIO_CHANNEL_INDEX_HDR | (1 << 1) - 1,
AUDIO_CHANNEL_INDEX_MASK_2 = AUDIO_CHANNEL_INDEX_HDR | (1 << 2) - 1,
AUDIO_CHANNEL_INDEX_MASK_3 = AUDIO_CHANNEL_INDEX_HDR | (1 << 3) - 1,
AUDIO_CHANNEL_INDEX_MASK_4 = AUDIO_CHANNEL_INDEX_HDR | (1 << 4) - 1,
AUDIO_CHANNEL_INDEX_MASK_5 = AUDIO_CHANNEL_INDEX_HDR | (1 << 5) - 1,
AUDIO_CHANNEL_INDEX_MASK_6 = AUDIO_CHANNEL_INDEX_HDR | (1 << 6) - 1,
AUDIO_CHANNEL_INDEX_MASK_7 = AUDIO_CHANNEL_INDEX_HDR | (1 << 7) - 1,
AUDIO_CHANNEL_INDEX_MASK_8 = AUDIO_CHANNEL_INDEX_HDR | (1 << 8) - 1,
// FIXME FCC_8
};
/* The return value is undefined if the channel mask is invalid. */
static inline uint32_t audio_channel_mask_get_bits(audio_channel_mask_t channel)
{
return channel & ((1 << AUDIO_CHANNEL_COUNT_MAX) - 1);
}
/* The return value is undefined if the channel mask is invalid. */
static inline audio_channel_representation_t audio_channel_mask_get_representation(
audio_channel_mask_t channel)
{
// The right shift should be sufficient, but also "and" for safety in case mask is not 32 bits
return (audio_channel_representation_t)
((channel >> AUDIO_CHANNEL_COUNT_MAX) & ((1 << AUDIO_CHANNEL_REPRESENTATION_LOG2) - 1));
}
/* Returns true if the channel mask is valid,
* or returns false for AUDIO_CHANNEL_NONE, AUDIO_CHANNEL_INVALID, and other invalid values.
* This function is unable to determine whether a channel mask for position assignment
* is invalid because an output mask has an invalid output bit set,
* or because an input mask has an invalid input bit set.
* All other APIs that take a channel mask assume that it is valid.
*/
static inline bool audio_channel_mask_is_valid(audio_channel_mask_t channel)
{
uint32_t bits = audio_channel_mask_get_bits(channel);
audio_channel_representation_t representation = audio_channel_mask_get_representation(channel);
switch (representation) {
case AUDIO_CHANNEL_REPRESENTATION_POSITION:
case AUDIO_CHANNEL_REPRESENTATION_INDEX:
break;
default:
bits = 0;
break;
}
return bits != 0;
}
/* Not part of public API */
static inline audio_channel_mask_t audio_channel_mask_from_representation_and_bits(
audio_channel_representation_t representation, uint32_t bits)
{
return (audio_channel_mask_t) ((representation << AUDIO_CHANNEL_COUNT_MAX) | bits);
}
/* Expresses the convention when stereo audio samples are stored interleaved
* in an array. This should improve readability by allowing code to use
* symbolic indices instead of hard-coded [0] and [1].
*
* For multi-channel beyond stereo, the platform convention is that channels
* are interleaved in order from least significant channel mask bit
* to most significant channel mask bit, with unused bits skipped.
* Any exceptions to this convention will be noted at the appropriate API.
*/
enum {
AUDIO_INTERLEAVE_LEFT = 0,
AUDIO_INTERLEAVE_RIGHT = 1,
};
typedef enum {
AUDIO_MODE_INVALID = -2,
AUDIO_MODE_CURRENT = -1,
AUDIO_MODE_NORMAL = 0,
AUDIO_MODE_RINGTONE = 1,
AUDIO_MODE_IN_CALL = 2,
AUDIO_MODE_IN_COMMUNICATION = 3,
AUDIO_MODE_FM = 4,
AUDIO_MODE_EARPIECE = 5,
AUDIO_MODE_CNT,
AUDIO_MODE_MAX = AUDIO_MODE_CNT - 1,
} audio_mode_t;
/* This enum is deprecated */
typedef enum {
AUDIO_IN_ACOUSTICS_NONE = 0,
AUDIO_IN_ACOUSTICS_AGC_ENABLE = 0x0001,
AUDIO_IN_ACOUSTICS_AGC_DISABLE = 0,
AUDIO_IN_ACOUSTICS_NS_ENABLE = 0x0002,
AUDIO_IN_ACOUSTICS_NS_DISABLE = 0,
AUDIO_IN_ACOUSTICS_TX_IIR_ENABLE = 0x0004,
AUDIO_IN_ACOUSTICS_TX_DISABLE = 0,
} audio_in_acoustics_t;
enum {
AUDIO_DEVICE_NONE = 0x0,
/* reserved bits */
AUDIO_DEVICE_BIT_IN = 0x80000000,
AUDIO_DEVICE_BIT_DEFAULT = 0x40000000,
/* output devices */
AUDIO_DEVICE_OUT_EARPIECE = 0x1,
AUDIO_DEVICE_OUT_SPEAKER = 0x2,
AUDIO_DEVICE_OUT_WIRED_HEADSET = 0x4,
AUDIO_DEVICE_OUT_WIRED_HEADPHONE = 0x8,
AUDIO_DEVICE_OUT_BLUETOOTH_SCO = 0x10,
AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET = 0x20,
AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT = 0x40,
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP = 0x80,
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES = 0x100,
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER = 0x200,
AUDIO_DEVICE_OUT_AUX_DIGITAL = 0x400,
AUDIO_DEVICE_OUT_HDMI = AUDIO_DEVICE_OUT_AUX_DIGITAL,
/* uses an analog connection (multiplexed over the USB connector pins for instance) */
AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET = 0x800,
AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET = 0x1000,
/* USB accessory mode: your Android device is a USB device and the dock is a USB host */
AUDIO_DEVICE_OUT_USB_ACCESSORY = 0x2000,
/* USB host mode: your Android device is a USB host and the dock is a USB device */
AUDIO_DEVICE_OUT_USB_DEVICE = 0x4000,
AUDIO_DEVICE_OUT_REMOTE_SUBMIX = 0x8000,
/* Telephony voice TX path */
AUDIO_DEVICE_OUT_TELEPHONY_TX = 0x10000,
/* Analog jack with line impedance detected */
AUDIO_DEVICE_OUT_LINE = 0x20000,
/* HDMI Audio Return Channel */
AUDIO_DEVICE_OUT_HDMI_ARC = 0x40000,
/* S/PDIF out */
AUDIO_DEVICE_OUT_SPDIF = 0x80000,
/* FM transmitter out */
AUDIO_DEVICE_OUT_FM = 0x100000,
/* Line out for av devices */
AUDIO_DEVICE_OUT_AUX_LINE = 0x200000,
/* limited-output speaker device for acoustic safety */
AUDIO_DEVICE_OUT_SPEAKER_SAFE = 0x400000,
AUDIO_DEVICE_OUT_IP = 0x800000,
AUDIO_DEVICE_OUT_DEFAULT = AUDIO_DEVICE_BIT_DEFAULT,
AUDIO_DEVICE_OUT_ALL = (AUDIO_DEVICE_OUT_EARPIECE |
AUDIO_DEVICE_OUT_SPEAKER |
AUDIO_DEVICE_OUT_WIRED_HEADSET |
AUDIO_DEVICE_OUT_WIRED_HEADPHONE |
AUDIO_DEVICE_OUT_BLUETOOTH_SCO |
AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET |
AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT |
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP |
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES |
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER |
AUDIO_DEVICE_OUT_HDMI |
AUDIO_DEVICE_OUT_ANLG_DOCK_HEADSET |
AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET |
AUDIO_DEVICE_OUT_USB_ACCESSORY |
AUDIO_DEVICE_OUT_USB_DEVICE |
AUDIO_DEVICE_OUT_REMOTE_SUBMIX |
AUDIO_DEVICE_OUT_TELEPHONY_TX |
AUDIO_DEVICE_OUT_LINE |
AUDIO_DEVICE_OUT_HDMI_ARC |
AUDIO_DEVICE_OUT_SPDIF |
AUDIO_DEVICE_OUT_FM |
AUDIO_DEVICE_OUT_AUX_LINE |
AUDIO_DEVICE_OUT_SPEAKER_SAFE |
AUDIO_DEVICE_OUT_IP |
AUDIO_DEVICE_OUT_DEFAULT),
AUDIO_DEVICE_OUT_ALL_A2DP = (AUDIO_DEVICE_OUT_BLUETOOTH_A2DP |
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES |
AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER),
AUDIO_DEVICE_OUT_ALL_SCO = (AUDIO_DEVICE_OUT_BLUETOOTH_SCO |
AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET |
AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT),
AUDIO_DEVICE_OUT_ALL_USB = (AUDIO_DEVICE_OUT_USB_ACCESSORY |
AUDIO_DEVICE_OUT_USB_DEVICE),
/* input devices */
AUDIO_DEVICE_IN_COMMUNICATION = AUDIO_DEVICE_BIT_IN | 0x1,
AUDIO_DEVICE_IN_AMBIENT = AUDIO_DEVICE_BIT_IN | 0x2,
AUDIO_DEVICE_IN_BUILTIN_MIC = AUDIO_DEVICE_BIT_IN | 0x4,
AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET = AUDIO_DEVICE_BIT_IN | 0x8,
AUDIO_DEVICE_IN_WIRED_HEADSET = AUDIO_DEVICE_BIT_IN | 0x10,
AUDIO_DEVICE_IN_AUX_DIGITAL = AUDIO_DEVICE_BIT_IN | 0x20,
AUDIO_DEVICE_IN_HDMI = AUDIO_DEVICE_IN_AUX_DIGITAL,
/* Telephony voice RX path */
AUDIO_DEVICE_IN_VOICE_CALL = AUDIO_DEVICE_BIT_IN | 0x40,
AUDIO_DEVICE_IN_TELEPHONY_RX = AUDIO_DEVICE_IN_VOICE_CALL,
AUDIO_DEVICE_IN_BACK_MIC = AUDIO_DEVICE_BIT_IN | 0x80,
AUDIO_DEVICE_IN_REMOTE_SUBMIX = AUDIO_DEVICE_BIT_IN | 0x100,
AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET = AUDIO_DEVICE_BIT_IN | 0x200,
AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET = AUDIO_DEVICE_BIT_IN | 0x400,
AUDIO_DEVICE_IN_USB_ACCESSORY = AUDIO_DEVICE_BIT_IN | 0x800,
AUDIO_DEVICE_IN_USB_DEVICE = AUDIO_DEVICE_BIT_IN | 0x1000,
/* FM tuner input */
AUDIO_DEVICE_IN_FM_TUNER = AUDIO_DEVICE_BIT_IN | 0x2000,
/* TV tuner input */
AUDIO_DEVICE_IN_TV_TUNER = AUDIO_DEVICE_BIT_IN | 0x4000,
/* Analog jack with line impedance detected */
AUDIO_DEVICE_IN_LINE = AUDIO_DEVICE_BIT_IN | 0x8000,
/* S/PDIF in */
AUDIO_DEVICE_IN_SPDIF = AUDIO_DEVICE_BIT_IN | 0x10000,
AUDIO_DEVICE_IN_BLUETOOTH_A2DP = AUDIO_DEVICE_BIT_IN | 0x20000,
AUDIO_DEVICE_IN_LOOPBACK = AUDIO_DEVICE_BIT_IN | 0x40000,
AUDIO_DEVICE_IN_IP = AUDIO_DEVICE_BIT_IN | 0x80000,
AUDIO_DEVICE_IN_DEFAULT = AUDIO_DEVICE_BIT_IN | AUDIO_DEVICE_BIT_DEFAULT,
AUDIO_DEVICE_IN_ALL = (AUDIO_DEVICE_IN_COMMUNICATION |
AUDIO_DEVICE_IN_AMBIENT |
AUDIO_DEVICE_IN_BUILTIN_MIC |
AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET |
AUDIO_DEVICE_IN_WIRED_HEADSET |
AUDIO_DEVICE_IN_HDMI |
AUDIO_DEVICE_IN_TELEPHONY_RX |
AUDIO_DEVICE_IN_BACK_MIC |
AUDIO_DEVICE_IN_REMOTE_SUBMIX |
AUDIO_DEVICE_IN_ANLG_DOCK_HEADSET |
AUDIO_DEVICE_IN_DGTL_DOCK_HEADSET |
AUDIO_DEVICE_IN_USB_ACCESSORY |
AUDIO_DEVICE_IN_USB_DEVICE |
AUDIO_DEVICE_IN_FM_TUNER |
AUDIO_DEVICE_IN_TV_TUNER |
AUDIO_DEVICE_IN_LINE |
AUDIO_DEVICE_IN_SPDIF |
AUDIO_DEVICE_IN_BLUETOOTH_A2DP |
AUDIO_DEVICE_IN_LOOPBACK |
AUDIO_DEVICE_IN_IP |
AUDIO_DEVICE_IN_DEFAULT),
AUDIO_DEVICE_IN_ALL_SCO = AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET,
AUDIO_DEVICE_IN_ALL_USB = (AUDIO_DEVICE_IN_USB_ACCESSORY |
AUDIO_DEVICE_IN_USB_DEVICE),
};
typedef uint32_t audio_devices_t;
/* the audio output flags serve two purposes:
* - when an AudioTrack is created they indicate a "wish" to be connected to an
* output stream with attributes corresponding to the specified flags
* - when present in an output profile descriptor listed for a particular audio
* hardware module, they indicate that an output stream can be opened that
* supports the attributes indicated by the flags.
* the audio policy manager will try to match the flags in the request
* (when getOuput() is called) to an available output stream.
*/
typedef enum {
AUDIO_OUTPUT_FLAG_NONE = 0x0, // no attributes
AUDIO_OUTPUT_FLAG_DIRECT = 0x1, // this output directly connects a track
// to one output stream: no software mixer
AUDIO_OUTPUT_FLAG_PRIMARY = 0x2, // this output is the primary output of
// the device. It is unique and must be
// present. It is opened by default and
// receives routing, audio mode and volume
// controls related to voice calls.
AUDIO_OUTPUT_FLAG_FAST = 0x4, // output supports "fast tracks",
// defined elsewhere
AUDIO_OUTPUT_FLAG_DEEP_BUFFER = 0x8, // use deep audio buffers
AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD = 0x10, // offload playback of compressed
// streams to hardware codec
AUDIO_OUTPUT_FLAG_NON_BLOCKING = 0x20, // use non-blocking write
AUDIO_OUTPUT_FLAG_HW_AV_SYNC = 0x40, // output uses a hardware A/V synchronization source
AUDIO_OUTPUT_FLAG_TTS = 0x80, // output for streams transmitted through speaker
// at a sample rate high enough to accommodate
// lower-range ultrasonic playback
AUDIO_OUTPUT_FLAG_RAW = 0x100, // minimize signal processing
AUDIO_OUTPUT_FLAG_SYNC = 0x200, // synchronize I/O streams
AUDIO_OUTPUT_FLAG_IEC958_NONAUDIO = 0x400, // Audio stream contains compressed audio in
// SPDIF data bursts, not PCM.
} audio_output_flags_t;
/* The audio input flags are analogous to audio output flags.
* Currently they are used only when an AudioRecord is created,
* to indicate a preference to be connected to an input stream with
* attributes corresponding to the specified flags.
*/
typedef enum {
AUDIO_INPUT_FLAG_NONE = 0x0, // no attributes
AUDIO_INPUT_FLAG_FAST = 0x1, // prefer an input that supports "fast tracks"
AUDIO_INPUT_FLAG_HW_HOTWORD = 0x2, // prefer an input that captures from hw hotword source
AUDIO_INPUT_FLAG_RAW = 0x4, // minimize signal processing
AUDIO_INPUT_FLAG_SYNC = 0x8, // synchronize I/O streams
} audio_input_flags_t;
/* Additional information about compressed streams offloaded to
* hardware playback
* The version and size fields must be initialized by the caller by using
* one of the constants defined here.
*/
typedef struct {
uint16_t version; // version of the info structure
uint16_t size; // total size of the structure including version and size
uint32_t sample_rate; // sample rate in Hz
audio_channel_mask_t channel_mask; // channel mask
audio_format_t format; // audio format
audio_stream_type_t stream_type; // stream type
uint32_t bit_rate; // bit rate in bits per second
int64_t duration_us; // duration in microseconds, -1 if unknown
bool has_video; // true if stream is tied to a video stream
bool is_streaming; // true if streaming, false if local playback
} audio_offload_info_t;
#define AUDIO_MAKE_OFFLOAD_INFO_VERSION(maj,min) \
((((maj) & 0xff) << 8) | ((min) & 0xff))
#define AUDIO_OFFLOAD_INFO_VERSION_0_1 AUDIO_MAKE_OFFLOAD_INFO_VERSION(0, 1)
#define AUDIO_OFFLOAD_INFO_VERSION_CURRENT AUDIO_OFFLOAD_INFO_VERSION_0_1
static const audio_offload_info_t AUDIO_INFO_INITIALIZER = {
version: AUDIO_OFFLOAD_INFO_VERSION_CURRENT,
size: sizeof(audio_offload_info_t),
sample_rate: 0,
channel_mask: 0,
format: AUDIO_FORMAT_DEFAULT,
stream_type: AUDIO_STREAM_VOICE_CALL,
bit_rate: 0,
duration_us: 0,
has_video: false,
is_streaming: false
};
/* common audio stream configuration parameters
* You should memset() the entire structure to zero before use to
* ensure forward compatibility
*/
struct audio_config {
uint32_t sample_rate;
audio_channel_mask_t channel_mask;
audio_format_t format;
audio_offload_info_t offload_info;
size_t frame_count;
};
typedef struct audio_config audio_config_t;
static const audio_config_t AUDIO_CONFIG_INITIALIZER = {
sample_rate: 0,
channel_mask: AUDIO_CHANNEL_NONE,
format: AUDIO_FORMAT_DEFAULT,
offload_info: {
version: AUDIO_OFFLOAD_INFO_VERSION_CURRENT,
size: sizeof(audio_offload_info_t),
sample_rate: 0,
channel_mask: 0,
format: AUDIO_FORMAT_DEFAULT,
stream_type: AUDIO_STREAM_VOICE_CALL,
bit_rate: 0,
duration_us: 0,
has_video: false,
is_streaming: false
},
frame_count: 0,
};
/* audio hw module handle functions or structures referencing a module */
typedef int audio_module_handle_t;
/******************************
* Volume control
*****************************/
/* If the audio hardware supports gain control on some audio paths,
* the platform can expose them in the audio_policy.conf file. The audio HAL
* will then implement gain control functions that will use the following data
* structures. */
/* Type of gain control exposed by an audio port */
#define AUDIO_GAIN_MODE_JOINT 0x1 /* supports joint channel gain control */
#define AUDIO_GAIN_MODE_CHANNELS 0x2 /* supports separate channel gain control */
#define AUDIO_GAIN_MODE_RAMP 0x4 /* supports gain ramps */
typedef uint32_t audio_gain_mode_t;
/* An audio_gain struct is a representation of a gain stage.
* A gain stage is always attached to an audio port. */
struct audio_gain {
audio_gain_mode_t mode; /* e.g. AUDIO_GAIN_MODE_JOINT */
audio_channel_mask_t channel_mask; /* channels which gain an be controlled.
N/A if AUDIO_GAIN_MODE_CHANNELS is not supported */
int min_value; /* minimum gain value in millibels */
int max_value; /* maximum gain value in millibels */
int default_value; /* default gain value in millibels */
unsigned int step_value; /* gain step in millibels */
unsigned int min_ramp_ms; /* minimum ramp duration in ms */
unsigned int max_ramp_ms; /* maximum ramp duration in ms */
};
/* The gain configuration structure is used to get or set the gain values of a
* given port */
struct audio_gain_config {
int index; /* index of the corresponding audio_gain in the
audio_port gains[] table */
audio_gain_mode_t mode; /* mode requested for this command */
audio_channel_mask_t channel_mask; /* channels which gain value follows.
N/A in joint mode */
// note this "8" is not FCC_8, so it won't need to be changed for > 8 channels
int values[sizeof(audio_channel_mask_t) * 8]; /* gain values in millibels
for each channel ordered from LSb to MSb in
channel mask. The number of values is 1 in joint
mode or popcount(channel_mask) */
unsigned int ramp_duration_ms; /* ramp duration in ms */
};
/******************************
* Routing control
*****************************/
/* Types defined here are used to describe an audio source or sink at internal
* framework interfaces (audio policy, patch panel) or at the audio HAL.
* Sink and sources are grouped in a concept of “audio port” representing an
* audio end point at the edge of the system managed by the module exposing
* the interface. */
/* Audio port role: either source or sink */
typedef enum {
AUDIO_PORT_ROLE_NONE,
AUDIO_PORT_ROLE_SOURCE,
AUDIO_PORT_ROLE_SINK,
} audio_port_role_t;
/* Audio port type indicates if it is a session (e.g AudioTrack),
* a mix (e.g PlaybackThread output) or a physical device
* (e.g AUDIO_DEVICE_OUT_SPEAKER) */
typedef enum {
AUDIO_PORT_TYPE_NONE,
AUDIO_PORT_TYPE_DEVICE,
AUDIO_PORT_TYPE_MIX,
AUDIO_PORT_TYPE_SESSION,
} audio_port_type_t;
/* Each port has a unique ID or handle allocated by policy manager */
typedef int audio_port_handle_t;
#define AUDIO_PORT_HANDLE_NONE 0
/* the maximum length for the human-readable device name */
#define AUDIO_PORT_MAX_NAME_LEN 128
/* maximum audio device address length */
#define AUDIO_DEVICE_MAX_ADDRESS_LEN 32
/* extension for audio port configuration structure when the audio port is a
* hardware device */
struct audio_port_config_device_ext {
audio_module_handle_t hw_module; /* module the device is attached to */
audio_devices_t type; /* device type (e.g AUDIO_DEVICE_OUT_SPEAKER) */
char address[AUDIO_DEVICE_MAX_ADDRESS_LEN]; /* device address. "" if N/A */
};
/* extension for audio port configuration structure when the audio port is a
* sub mix */
struct audio_port_config_mix_ext {
audio_module_handle_t hw_module; /* module the stream is attached to */
audio_io_handle_t handle; /* I/O handle of the input/output stream */
union {
//TODO: change use case for output streams: use strategy and mixer attributes
audio_stream_type_t stream;
audio_source_t source;
} usecase;
};
/* extension for audio port configuration structure when the audio port is an
* audio session */
struct audio_port_config_session_ext {
audio_session_t session; /* audio session */
};
/* Flags indicating which fields are to be considered in struct audio_port_config */
#define AUDIO_PORT_CONFIG_SAMPLE_RATE 0x1
#define AUDIO_PORT_CONFIG_CHANNEL_MASK 0x2
#define AUDIO_PORT_CONFIG_FORMAT 0x4
#define AUDIO_PORT_CONFIG_GAIN 0x8
#define AUDIO_PORT_CONFIG_ALL (AUDIO_PORT_CONFIG_SAMPLE_RATE | \
AUDIO_PORT_CONFIG_CHANNEL_MASK | \
AUDIO_PORT_CONFIG_FORMAT | \
AUDIO_PORT_CONFIG_GAIN)
/* audio port configuration structure used to specify a particular configuration of
* an audio port */
struct audio_port_config {
audio_port_handle_t id; /* port unique ID */
audio_port_role_t role; /* sink or source */
audio_port_type_t type; /* device, mix ... */
unsigned int config_mask; /* e.g AUDIO_PORT_CONFIG_ALL */
unsigned int sample_rate; /* sampling rate in Hz */
audio_channel_mask_t channel_mask; /* channel mask if applicable */
audio_format_t format; /* format if applicable */
struct audio_gain_config gain; /* gain to apply if applicable */
union {
struct audio_port_config_device_ext device; /* device specific info */
struct audio_port_config_mix_ext mix; /* mix specific info */
struct audio_port_config_session_ext session; /* session specific info */
} ext;
};
/* max number of sampling rates in audio port */
#define AUDIO_PORT_MAX_SAMPLING_RATES 16
/* max number of channel masks in audio port */
#define AUDIO_PORT_MAX_CHANNEL_MASKS 16
/* max number of audio formats in audio port */
#define AUDIO_PORT_MAX_FORMATS 16
/* max number of gain controls in audio port */
#define AUDIO_PORT_MAX_GAINS 16
/* extension for audio port structure when the audio port is a hardware device */
struct audio_port_device_ext {
audio_module_handle_t hw_module; /* module the device is attached to */
audio_devices_t type; /* device type (e.g AUDIO_DEVICE_OUT_SPEAKER) */
char address[AUDIO_DEVICE_MAX_ADDRESS_LEN];
};
/* Latency class of the audio mix */
typedef enum {
AUDIO_LATENCY_LOW,
AUDIO_LATENCY_NORMAL,
} audio_mix_latency_class_t;
/* extension for audio port structure when the audio port is a sub mix */
struct audio_port_mix_ext {
audio_module_handle_t hw_module; /* module the stream is attached to */
audio_io_handle_t handle; /* I/O handle of the input.output stream */
audio_mix_latency_class_t latency_class; /* latency class */
// other attributes: routing strategies
};
/* extension for audio port structure when the audio port is an audio session */
struct audio_port_session_ext {
audio_session_t session; /* audio session */
};
struct audio_port {
audio_port_handle_t id; /* port unique ID */
audio_port_role_t role; /* sink or source */
audio_port_type_t type; /* device, mix ... */
char name[AUDIO_PORT_MAX_NAME_LEN];
unsigned int num_sample_rates; /* number of sampling rates in following array */
unsigned int sample_rates[AUDIO_PORT_MAX_SAMPLING_RATES];
unsigned int num_channel_masks; /* number of channel masks in following array */
audio_channel_mask_t channel_masks[AUDIO_PORT_MAX_CHANNEL_MASKS];
unsigned int num_formats; /* number of formats in following array */
audio_format_t formats[AUDIO_PORT_MAX_FORMATS];
unsigned int num_gains; /* number of gains in following array */
struct audio_gain gains[AUDIO_PORT_MAX_GAINS];
struct audio_port_config active_config; /* current audio port configuration */
union {
struct audio_port_device_ext device;
struct audio_port_mix_ext mix;
struct audio_port_session_ext session;
} ext;
};
/* An audio patch represents a connection between one or more source ports and
* one or more sink ports. Patches are connected and disconnected by audio policy manager or by
* applications via framework APIs.
* Each patch is identified by a handle at the interface used to create that patch. For instance,
* when a patch is created by the audio HAL, the HAL allocates and returns a handle.
* This handle is unique to a given audio HAL hardware module.
* But the same patch receives another system wide unique handle allocated by the framework.
* This unique handle is used for all transactions inside the framework.
*/
typedef int audio_patch_handle_t;
#define AUDIO_PATCH_HANDLE_NONE 0
#define AUDIO_PATCH_PORTS_MAX 16
struct audio_patch {
audio_patch_handle_t id; /* patch unique ID */
unsigned int num_sources; /* number of sources in following array */
struct audio_port_config sources[AUDIO_PATCH_PORTS_MAX];
unsigned int num_sinks; /* number of sinks in following array */
struct audio_port_config sinks[AUDIO_PATCH_PORTS_MAX];
};
/* a HW synchronization source returned by the audio HAL */
typedef uint32_t audio_hw_sync_t;
/* an invalid HW synchronization source indicating an error */
#define AUDIO_HW_SYNC_INVALID 0
static inline bool audio_is_output_device(audio_devices_t device)
{
if (((device & AUDIO_DEVICE_BIT_IN) == 0) &&
(popcount(device) == 1) && ((device & ~AUDIO_DEVICE_OUT_ALL) == 0))
return true;
else
return false;
}
static inline bool audio_is_input_device(audio_devices_t device)
{
if ((device & AUDIO_DEVICE_BIT_IN) != 0) {
device &= ~AUDIO_DEVICE_BIT_IN;
if ((popcount(device) == 1) && ((device & ~AUDIO_DEVICE_IN_ALL) == 0))
return true;
}
return false;
}
static inline bool audio_is_output_devices(audio_devices_t device)
{
return (device & AUDIO_DEVICE_BIT_IN) == 0;
}
static inline bool audio_is_a2dp_in_device(audio_devices_t device)
{
if ((device & AUDIO_DEVICE_BIT_IN) != 0) {
device &= ~AUDIO_DEVICE_BIT_IN;
if ((popcount(device) == 1) && (device & AUDIO_DEVICE_IN_BLUETOOTH_A2DP))
return true;
}
return false;
}
static inline bool audio_is_a2dp_out_device(audio_devices_t device)
{
if ((popcount(device) == 1) && (device & AUDIO_DEVICE_OUT_ALL_A2DP))
return true;
else
return false;
}
// Deprecated - use audio_is_a2dp_out_device() instead
static inline bool audio_is_a2dp_device(audio_devices_t device)
{
return audio_is_a2dp_out_device(device);
}
static inline bool audio_is_bluetooth_sco_device(audio_devices_t device)
{
if ((device & AUDIO_DEVICE_BIT_IN) == 0) {
if ((popcount(device) == 1) && ((device & ~AUDIO_DEVICE_OUT_ALL_SCO) == 0))
return true;
} else {
device &= ~AUDIO_DEVICE_BIT_IN;
if ((popcount(device) == 1) && ((device & ~AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET) == 0))
return true;
}
return false;
}
static inline bool audio_is_usb_out_device(audio_devices_t device)
{
return ((popcount(device) == 1) && (device & AUDIO_DEVICE_OUT_ALL_USB));
}
static inline bool audio_is_usb_in_device(audio_devices_t device)
{
if ((device & AUDIO_DEVICE_BIT_IN) != 0) {
device &= ~AUDIO_DEVICE_BIT_IN;
if (popcount(device) == 1 && (device & AUDIO_DEVICE_IN_ALL_USB) != 0)
return true;
}
return false;
}
/* OBSOLETE - use audio_is_usb_out_device() instead. */
static inline bool audio_is_usb_device(audio_devices_t device)
{
return audio_is_usb_out_device(device);
}
static inline bool audio_is_remote_submix_device(audio_devices_t device)
{
if ((audio_is_output_devices(device) &&
(device & AUDIO_DEVICE_OUT_REMOTE_SUBMIX) == AUDIO_DEVICE_OUT_REMOTE_SUBMIX)
|| (!audio_is_output_devices(device) &&
(device & AUDIO_DEVICE_IN_REMOTE_SUBMIX) == AUDIO_DEVICE_IN_REMOTE_SUBMIX))
return true;
else
return false;
}
/* Returns true if:
* representation is valid, and
* there is at least one channel bit set which _could_ correspond to an input channel, and
* there are no channel bits set which could _not_ correspond to an input channel.
* Otherwise returns false.
*/
static inline bool audio_is_input_channel(audio_channel_mask_t channel)
{
uint32_t bits = audio_channel_mask_get_bits(channel);
switch (audio_channel_mask_get_representation(channel)) {
case AUDIO_CHANNEL_REPRESENTATION_POSITION:
if (bits & ~AUDIO_CHANNEL_IN_ALL) {
bits = 0;
}
// fall through
case AUDIO_CHANNEL_REPRESENTATION_INDEX:
return bits != 0;
default:
return false;
}
}
/* Returns true if:
* representation is valid, and
* there is at least one channel bit set which _could_ correspond to an output channel, and
* there are no channel bits set which could _not_ correspond to an output channel.
* Otherwise returns false.
*/
static inline bool audio_is_output_channel(audio_channel_mask_t channel)
{
uint32_t bits = audio_channel_mask_get_bits(channel);
switch (audio_channel_mask_get_representation(channel)) {
case AUDIO_CHANNEL_REPRESENTATION_POSITION:
if (bits & ~AUDIO_CHANNEL_OUT_ALL) {
bits = 0;
}
// fall through
case AUDIO_CHANNEL_REPRESENTATION_INDEX:
return bits != 0;
default:
return false;
}
}
/* Returns the number of channels from an input channel mask,
* used in the context of audio input or recording.
* If a channel bit is set which could _not_ correspond to an input channel,
* it is excluded from the count.
* Returns zero if the representation is invalid.
*/
static inline uint32_t audio_channel_count_from_in_mask(audio_channel_mask_t channel)
{
uint32_t bits = audio_channel_mask_get_bits(channel);
switch (audio_channel_mask_get_representation(channel)) {
case AUDIO_CHANNEL_REPRESENTATION_POSITION:
// TODO: We can now merge with from_out_mask and remove anding
bits &= AUDIO_CHANNEL_IN_ALL;
// fall through
case AUDIO_CHANNEL_REPRESENTATION_INDEX:
return popcount(bits);
default:
return 0;
}
}
/* Returns the number of channels from an output channel mask,
* used in the context of audio output or playback.
* If a channel bit is set which could _not_ correspond to an output channel,
* it is excluded from the count.
* Returns zero if the representation is invalid.
*/
static inline uint32_t audio_channel_count_from_out_mask(audio_channel_mask_t channel)
{
uint32_t bits = audio_channel_mask_get_bits(channel);
switch (audio_channel_mask_get_representation(channel)) {
case AUDIO_CHANNEL_REPRESENTATION_POSITION:
// TODO: We can now merge with from_in_mask and remove anding
bits &= AUDIO_CHANNEL_OUT_ALL;
// fall through
case AUDIO_CHANNEL_REPRESENTATION_INDEX:
return popcount(bits);
default:
return 0;
}
}
/* Derive a channel mask for index assignment from a channel count.
* Returns the matching channel mask,
* or AUDIO_CHANNEL_NONE if the channel count is zero,
* or AUDIO_CHANNEL_INVALID if the channel count exceeds AUDIO_CHANNEL_COUNT_MAX.
*/
static inline audio_channel_mask_t audio_channel_mask_for_index_assignment_from_count(
uint32_t channel_count)
{
if (channel_count == 0) {
return AUDIO_CHANNEL_NONE;
}
if (channel_count > AUDIO_CHANNEL_COUNT_MAX) {
return AUDIO_CHANNEL_INVALID;
}
uint32_t bits = (1 << channel_count) - 1;
return audio_channel_mask_from_representation_and_bits(
AUDIO_CHANNEL_REPRESENTATION_INDEX, bits);
}
/* Derive an output channel mask for position assignment from a channel count.
* This is to be used when the content channel mask is unknown. The 1, 2, 4, 5, 6, 7 and 8 channel
* cases are mapped to the standard game/home-theater layouts, but note that 4 is mapped to quad,
* and not stereo + FC + mono surround. A channel count of 3 is arbitrarily mapped to stereo + FC
* for continuity with stereo.
* Returns the matching channel mask,
* or AUDIO_CHANNEL_NONE if the channel count is zero,
* or AUDIO_CHANNEL_INVALID if the channel count exceeds that of the
* configurations for which a default output channel mask is defined.
*/
static inline audio_channel_mask_t audio_channel_out_mask_from_count(uint32_t channel_count)
{
uint32_t bits;
switch (channel_count) {
case 0:
return AUDIO_CHANNEL_NONE;
case 1:
bits = AUDIO_CHANNEL_OUT_MONO;
break;
case 2:
bits = AUDIO_CHANNEL_OUT_STEREO;
break;
case 3:
bits = AUDIO_CHANNEL_OUT_STEREO | AUDIO_CHANNEL_OUT_FRONT_CENTER;
break;
case 4: // 4.0
bits = AUDIO_CHANNEL_OUT_QUAD;
break;
case 5: // 5.0
bits = AUDIO_CHANNEL_OUT_QUAD | AUDIO_CHANNEL_OUT_FRONT_CENTER;
break;
case 6: // 5.1
bits = AUDIO_CHANNEL_OUT_5POINT1;
break;
case 7: // 6.1
bits = AUDIO_CHANNEL_OUT_5POINT1 | AUDIO_CHANNEL_OUT_BACK_CENTER;
break;
case 8:
bits = AUDIO_CHANNEL_OUT_7POINT1;
break;
// FIXME FCC_8
default:
return AUDIO_CHANNEL_INVALID;
}
return audio_channel_mask_from_representation_and_bits(
AUDIO_CHANNEL_REPRESENTATION_POSITION, bits);
}
/* Derive a default input channel mask from a channel count.
* Assumes a position mask for mono and stereo, or an index mask for channel counts > 2.
* Returns the matching channel mask,
* or AUDIO_CHANNEL_NONE if the channel count is zero,
* or AUDIO_CHANNEL_INVALID if the channel count exceeds that of the
* configurations for which a default input channel mask is defined.
*/
static inline audio_channel_mask_t audio_channel_in_mask_from_count(uint32_t channel_count)
{
uint32_t bits;
switch (channel_count) {
case 0:
return AUDIO_CHANNEL_NONE;
case 1:
bits = AUDIO_CHANNEL_IN_MONO;
break;
case 2:
bits = AUDIO_CHANNEL_IN_STEREO;
break;
case 3:
case 4:
case 5:
case 6:
case 7:
case 8:
// FIXME FCC_8
return audio_channel_mask_for_index_assignment_from_count(channel_count);
default:
return AUDIO_CHANNEL_INVALID;
}
return audio_channel_mask_from_representation_and_bits(
AUDIO_CHANNEL_REPRESENTATION_POSITION, bits);
}
static inline bool audio_is_valid_format(audio_format_t format)
{
switch (format & AUDIO_FORMAT_MAIN_MASK) {
case AUDIO_FORMAT_PCM:
switch (format) {
case AUDIO_FORMAT_PCM_16_BIT:
case AUDIO_FORMAT_PCM_8_BIT:
case AUDIO_FORMAT_PCM_32_BIT:
case AUDIO_FORMAT_PCM_8_24_BIT:
case AUDIO_FORMAT_PCM_FLOAT:
case AUDIO_FORMAT_PCM_24_BIT_PACKED:
return true;
default:
return false;
}
/* not reached */
case AUDIO_FORMAT_MP3:
case AUDIO_FORMAT_AMR_NB:
case AUDIO_FORMAT_AMR_WB:
case AUDIO_FORMAT_AAC:
case AUDIO_FORMAT_HE_AAC_V1:
case AUDIO_FORMAT_HE_AAC_V2:
case AUDIO_FORMAT_VORBIS:
case AUDIO_FORMAT_OPUS:
case AUDIO_FORMAT_AC3:
case AUDIO_FORMAT_E_AC3:
case AUDIO_FORMAT_DTS:
case AUDIO_FORMAT_DTS_HD:
return true;
default:
return false;
}
}
static inline bool audio_is_linear_pcm(audio_format_t format)
{
return ((format & AUDIO_FORMAT_MAIN_MASK) == AUDIO_FORMAT_PCM);
}
static inline size_t audio_bytes_per_sample(audio_format_t format)
{
size_t size = 0;
switch (format) {
case AUDIO_FORMAT_PCM_32_BIT:
case AUDIO_FORMAT_PCM_8_24_BIT:
size = sizeof(int32_t);
break;
case AUDIO_FORMAT_PCM_24_BIT_PACKED:
size = sizeof(uint8_t) * 3;
break;
case AUDIO_FORMAT_PCM_16_BIT:
size = sizeof(int16_t);
break;
case AUDIO_FORMAT_PCM_8_BIT:
size = sizeof(uint8_t);
break;
case AUDIO_FORMAT_PCM_FLOAT:
size = sizeof(float);
break;
default:
break;
}
return size;
}
/* converts device address to string sent to audio HAL via set_parameters */
static inline char *audio_device_address_to_parameter(audio_devices_t device, const char *address)
{
const size_t kSize = AUDIO_DEVICE_MAX_ADDRESS_LEN + sizeof("a2dp_sink_address=");
char param[kSize];
if (device & AUDIO_DEVICE_OUT_ALL_A2DP)
snprintf(param, kSize, "%s=%s", "a2dp_sink_address", address);
else if (device & AUDIO_DEVICE_OUT_REMOTE_SUBMIX)
snprintf(param, kSize, "%s=%s", "mix", address);
else
snprintf(param, kSize, "%s", address);
return strdup(param);
}
static inline bool audio_device_is_digital(audio_devices_t device) {
if ((device & AUDIO_DEVICE_BIT_IN) != 0) {
// input
return (~AUDIO_DEVICE_BIT_IN & device & (AUDIO_DEVICE_IN_ALL_USB |
AUDIO_DEVICE_IN_HDMI |
AUDIO_DEVICE_IN_SPDIF |
AUDIO_DEVICE_IN_IP)) != 0;
} else {
// output
return (device & (AUDIO_DEVICE_OUT_ALL_USB |
AUDIO_DEVICE_OUT_HDMI |
AUDIO_DEVICE_OUT_HDMI_ARC |
AUDIO_DEVICE_OUT_SPDIF |
AUDIO_DEVICE_OUT_IP)) != 0;
}
}
__END_DECLS
#endif // ANDROID_AUDIO_CORE_H