install bcm4313 wireless adatper

1 解压
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-v35-nodebug-pcoem-portsrc.tar.gz or 
	<path>/hybrid-v35_64-nodebug-pcoem-portsrc.tar.gz
2 编译
# make clean   (optional)
# make
#若以上make 出现error,则使用着两个命令的其中一个 ，make API=CFG80211，make API=WEXT

3 移除冲突

若系统本身自带以相关的驱动，但是这些驱动是和我们进行安装的驱动有冲突，则进行以下的操作
# lsmod  | grep "brcmsmac\|b43\|ssb\|bcma\|wl"

If any of these are installed, remove them:
# rmmod b43
# rmmod brcmsmac
# rmmod ssb
# rmmod bcma
# rmmod wl

To blacklist these drivers and prevent them from loading in the future:
# echo "blacklist ssb" >> /etc/modprobe.d/blacklist.conf
# echo "blacklist bcma" >> /etc/modprobe.d/blacklist.conf
# echo "blacklist b43" >> /etc/modprobe.d/blacklist.conf
# echo "blacklist brcmsmac" >> /etc/modprobe.d/blacklist.conf

4 安装网卡驱动
# modprobe lib80211 
  or 
# modprobe ieee80211_crypt_tkip

# insmod wl.ko

5 设置开机启动
# load driver as described above
# cp wl.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless 
# depmod -a

# echo modeprobe wl >> /etc/rc.local  (Fedora/SUSE)