/**
* Returns the number of zero bits preceding the highest-order
* ("leftmost") one-bit in the two's complement binary representation
* of the specified {@code int} value. Returns 32 if the
* specified value has no one-bits in its two's complement representation,
* in other words if it is equal to zero.
*
* <p>Note that this method is closely related to the logarithm base 2.
* For all positive {@code int} values x:
* <ul>
* <li>floor(log<sub>2</sub>(x)) = {@code 31 - numberOfLeadingZeros(x)}
* <li>ceil(log<sub>2</sub>(x)) = {@code 32 - numberOfLeadingZeros(x - 1)}
* </ul>
*
* @param i the value whose number of leading zeros is to be computed
* @return the number of zero bits preceding the highest-order
* ("leftmost") one-bit in the two's complement binary representation
* of the specified {@code int} value, or 32 if the value
* is equal to zero.
* @since 1.5
*/
public static int numberOfLeadingZeros(int i) {
// HD, Figure 5-6
if (i == 0)
return 32;
int n = 1;
if (i >>> 16 == 0) { n += 16; i <<= 16; }
if (i >>> 24 == 0) { n += 8; i <<= 8; }
if (i >>> 28 == 0) { n += 4; i <<= 4; }
if (i >>> 30 == 0) { n += 2; i <<= 2; }
n -= i >>> 31;
return n;
}
public static int numberOfLeadingZeros(int i)
该函数的功能 在指定 int 值的二进制补码表示形式中最高位(最左边)的 1 位之前,返回零位的数量。如果指定值在其二进制补码表示形式中不存在 1 位,换句话说,如果它等于零,则返回 32。
源码:应用了典型的二分查找,先把32位整形分为高16位和低16位查找非零数,在对高16位进行或低16位进行二分
// 首先在jvm中一个int类型的数据占4个字节,共32位,其实就相当于一个长度为32的数组。
// 那我们要计算首部0的个数,就是从左边第一个位开始累加0的个数,直到遇到一个非零值。
public static int numberOfLeadingZeros(int i) {
if (i == 0)
return 32;
int n = 1;
// 下面的代码就是定位从左边开始第一个非零值的位置,在定位过程中顺便累加从左边开始0的个数
// 将i无符号右移16位后,有二种情况;
// 情况1.i=0,则第一个非零值位于低16位,i至少有16个0,同时将i左移16位(把低16位移到原高16位的位置,这样情况1和情况2就能统一后续的判断方式)
// 情况2.i!=0,则第一个非零值位于高16位,后续在高16位中继续判断
// 这个思路就是二分查找,首先把32位的数分为高低16位,如果非零值位于高16位,后续再将高16位继续二分为高低8位,一直二分到集合中只有1个元素
if (i >>> 16 == 0) { n += 16; i <<= 16; }
// 判断第一个非零值是否位于高8位
if (i >>> 24 == 0) { n += 8; i <<= 8; }
// 判断第一个非零值是否位于高4位
if (i >>> 28 == 0) { n += 4; i <<= 4; }
// 判断第一个非零值是否位于高2位
if (i >>> 30 == 0) { n += 2; i <<= 2; }
// 判断第一个非零值是否位于左边第一位
n -= i >>> 31;
return n;
}